User's Manual

CM6623 RF remote controller

PLEASE READ THE INSTRUCTIONS BEFORE USE

CM6623 RF remote controller is for LED series WL66231Y, WL66251Y,

WL6640Y. It use RF remote technology and was very convenient for user.

1. Function introduction

1.1 The functions of the three buttons are as followed:

Dimmer & Memory button : Pressing for the first time, the color will

change gradually, pressing the button for the second time 1 second, it

will remember the current color, and then you can press to withdraw

the memory color. Pressing the button for the third time is for turn off...

Multiple choice & Candle button : When pressing the button, the

collaboration of the color is white, RGB candle, red, green, blue, yellow,

purple, cyan, light yellow, light purple, RGB white, and off.

Light adjust button : there are 7 levels different intensity brightness.

1.2 Keep the distance of the LED light and remote, you can control the LED

light by remote.

2. Technical specifications

2.1. Dimensions: （L）86.2 mm *（W）40.2*（H）13.3 mm；Weight: 28.5g

2.2 RF characteristic:

Transmission frequency: 433.92MHZ；

Remote distance: 10-15M

2.3 Working current: 20mA, standby mode current: 2-5uA

2.4 Working pressure: Alkaline dry battery, 12V 23A

PAGE 1
CM6623 RF remote controller PLEASE READ THE INSTRUCTIONS BEFORE USE CM6623 RF remote controller is for LED series WL66231Y, WL66251Y, WL6640Y. It use RF remote technology and was very convenient for user. 1. Function introduction 1.
PAGE 2
3. Notes: Please read carefully the following items and use it according the rules. 3.1 Use outdoor or indoor, do not put in the fire or burn, to avoid environmental pollution. 3.2 Do not clean it with corrosive liquid. Avoid any scratched to its face. 3.3 Do not put it under where too hot, too cold, and too wet or too dust, avoid the sun shine directly. 3.4 Clean its face with dry cloth, do not use corrosive liquid. 3.5 Do not dismantle or modify any part of this product, otherwise it will broken.