Installation Instruction

ManualsBrandsShenzhen Xinsilu Smart Home ManualsElectronicsSelf-powered wireless doorbell

Battery free wireless doorbell could make use of wireless signal generated by wireless

transmitter module, which is driven by electric energy transformed from kinetic energy

when press the button.Compared with traditional doorbell, it doesn’t need battery at all.

Doorbell receiver*1 Emitter button*1 Instruction book*1

1. Receiver input voltage: AC100V-240V

2. Receiver power dissipation: ＜ 0.3W

3. Ring tone grade: ＞80dbA

4. Receiver sensitivity: ＜- 110dbm

5. Emitter button stroke: 3.2mm

6. Emitter button pressure: 3-4N

1. Reset mode: plug in power socket when press and hold volume key.

2. Pair mode: press and hold volume key for 5s, paired when you hear the default ring tone.

(When you hear the music, it's Ding Dong,Voice size recognition)

Plug the receiver in to a AC100V-240V power socket.

Use double-sided adhesive tape to paste the emitter on wall or door.

Paste side A of the tape on emitter Paste the side B on wall.

7. Emitter service life: ＞200,000 times

8. Emitter power dissipation: 10nw

9. Wireless frequency: 433.9MHz

10. Modulator type: ASK

11. Eﬀective remote distance in open area:

≤100m

12. Operating temperature range: -20℃~70℃

1. 38 chord ringtones, loud and clear.

2. Our product is non-toxic and harmless to health. It complies with EU RoHS, and PAH

standard requirements.

3. Brand new ABS raw material.

4. Stable performance ensured by imported chips, SMT craft, produced and tested under

directive requirements of CE, FCC-ID.

5. Fashionable and exquisite appearance.

6. Our product is environmental friendly, low carbon, low radiation, ultra-low power

dissipation.

7.One receiver could be paired with 5 emitters，One emitters could be paired with

5 receiver .

Ⅰ.Product overview

Ⅱ.Product features

Ⅲ.Boxing list

Ⅳ.Speciﬁcations

Ⅴ.Emitter installation

Ⅵ.Receiver bell installation

Ⅶ.How to pair

Choose ring tone(38 pieces of music)

Set proper volume(4th gear adjustment)

Please read the instructions carefully before using to guarantee

correct and proper operation

INSTALLATION INSTRUCTION MANUAL

ZFD-21A

Summary of content (2 pages)

PAGE 1
ZFD-21A INSTALLATION INSTRUCTION MANUAL Ⅲ.Boxing list Doorbell receiver*1 Ⅳ.Speciﬁcations Emitter button*1 Instruction book*1 1. Receiver input voltage: AC100V-240V 7. Emitter service life: ＞200,000 times 3. Ring tone grade: ＞80dbA 9. Wireless frequency: 433.9MHz 2. Receiver power dissipation: ＜ 0.3W 4. Receiver sensitivity: ＜- 110dbm 5. Emitter button stroke: 3.2mm 8. Emitter power dissipation: 10nw 10. Modulator type: ASK 12. Operating temperature range: -20℃~70℃ 11.
PAGE 2
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.