User's Manual

WARRANTY
Wireless Charging Stand
User Manual
1. The power of all devices should not exceed
rated power of this power strip, such as hair
dryers or steam irons.
2. Do not covers the power strip with anything
to prevent overheat.
3. Do not use it in humid environment.
4. Do not disassemble or modify it by yourself.
1. The power cable on this strip is flexible
enough to let it settle in place on the desk,
and the 4 anti-slip rubber footpads at the
bottom keep from slipping and sliding.
2. Hidden Blue LED indicator doesn’t disturb you
when sleeping and let you know your phone
is charging wirelessly.
3. The switch can completely shut off
electronics when not in use, helping to
conserve energy.
4. In order to help you to better organize the
extension cord we offer you a fastening
cable tie as a gift just want you to be happy
with our product.
5.Transmits charging power straight through
even heavy-protection phone cases (5mm).
NOTE: Magnetic or metal attachments and
other foreign objects will interfere with
charging.
WARRANTY
MADE IN CHINA
1. Wireless Charger
2. 2 USB Port
3. Type-C Port
4. AC Socket
OVERVIEW
5. LED Indicator
6. ON/OFF Switch
7. Non-Slip Pads
8. Heat Dissipation Holes
FEATURES
SAFETY
COMPATIBILITY
3. 5W Standard Charge Mode:
All Qi-enabled phones and devices
Pixel 3 / Pixel 3XL (The phone's screen will
display the message: Charging slowly)
SPECIFICATION
Power Strip with Fast Wireless Charger
Model:
W88
Interface:
2 Outlets & 3 USB Ports
AC Output:
Power Input:
USB Total Output:
Type-C Output:
Wireless Charger Output:
5V1A/7.5V1A/9V1.1A
Material:
Fire-resistant ABS shell
Cable Length:
5 feet
Dimension:
4.96 * 3.43 * 4.25 in
USB Power Strip
5
6
2
1
3
4
7
8
1. 10W Fast Charge Mode:
Samsung Galaxy S10 / S9+ / S9 / S8 / S8+
/ S7 edge / S7 / S6 edge+
Samsung Note 10 / Note 9 / Note 8 / Note 7
AC110V-240V 1250W (Max)
1250
PD18W 12V1.5A/9V2A/5V2.4A
Desktop Power Strip
260.00 mm
90.00 mm
Ensure that all products to be of thehighest
quality in material,craftsmanshipand
services for 18 months from the date of
purchase.
We will replace any product found to be
defective due to manufacturer flaws based
Refunds are available within the first 30 days
after purchase.
AC110 V- 2 4 0 V 50/60Hz
110V-240
3-in-1 wireless charging station
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: 1) this device may not cause harmful interference, and 2)
this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter. During the operation of device a
distance of 15 cm surrounding the device and 20 cm above the top surface of the
device must be respected.
FCC StatementFCC Statement