Installation Manual

Acrylic Vanity Mirror
Installation Manual
Thank you for purchasing our Acrylic Vanity Mirror!
To avoid product damage and personal injuries;
please carefully read and understand all
information in this manual before commencing
with the installation.
SETTING UP YOUR MIRROR
1. Carefully unpack the mirror, base, stand and screws.
2. Using a screwdriver attach oval base to the bottom of
stand through the pre-drilled holes (step 1).
Then attach stand to the back of triangle base through the
pre-drilled holes (step 2).
3. Attach installed base to the back of mirror by screw B .
4. Once all screws have been tightened , you can place your
mirror into your desired position.
5. You can now plug the power cable into a power socket.
Your Acrylic Vanity mirror is now ready to use!
How to Use the Features
Touch switch(Power, Color Temperature & Brightness Touch Control)
1. To Control Lighting Temperature:
 First touch will turn on the mirror at the standard color temperature of
6400K.
 Second touch will change the color temperature to 3000K.
 The third touch will change color temperature to 4200K.
2. To control Brightness/ Dimming:
 Once you have found your desired temperature setting, HOLD DOWN
the touch button to increase or decrease brightness.
Bluetooth Touch Button (Bluetooth Speaker Control)
• Using your Smart-phone or any bluetooth incorporated device, search &
connect to “Smart mirror”.
• Once synced, you may now control the music via your device or through our
smart touch screen display.
A. Press this button to return to the previous song - Hold down to reduce the
volume.
B. Press this button to pause or resume playing.
C. Press this button to skip to the next song – Hold down to increase volume.
WARNINGS!
• Please DO NOT Plug in the power cable during installation – All power must
be turned OFF until completion.
• DO NOT hang, drape or place objects too close to the light frame as they
could burn or melt.
•
Be cautious when cleaning the mirror surface; do not use abrasive materials
as this will damage the overall finish.
LED MIRROR/ LM-1907
•
Changes or modifications not expressly approved by the party responsible
for compliance could void your authority to operate the equipment.
•
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.