Manual of Hollywood vanity mirror Please save this manual for future reference LED MIRROR HM-1901 1. Plug 2. USA outlet and USB port ( This product does not support this feature. ) 3. Bluetooth touch button 4. Bluetooth display screen 5. Speaker 6.
I SETTING UP YOUR MIRROR 1. Unpack the mirror carefully. 2. Lay all the parts out ready for assembly. 3. Using a screwdriver attach base to bottom of mirror through pre-drilled holes. 4. Lift mirror carefully into required location and install the bulbs. 5. Your Hollywood Mirror is now ready to use! Enjoy it. II QUICK GUIDE Turn on / off light & Brightness control : Press this button to turn on or turn off the light. HOLD DOWN the touch button to increase or decrease brightness.
III HOW TO USE THE FEATURES? Parameters of LED mirror : Audio Frequency Size of screen Speaker Max power Speaker impedance 20Hz-20KHz 4.3 inch 8W 4 Ω, 3W*2 Touch button : Light on/off switch, Brightness Touch Control. Press this button to turn on or turn off the light. HOLD DOWN the touch button to increase or decrease brightness. : Press this button to return to the previous song - Hold down to reduce the volume. The time point will reduce based on numbers during the process of time-setting.
How to connect Bluetooth? 1. When plug in, the display screen will show “HI“ (as pic 1). After about 2 seconds, the entire Bluetooth screen lights up, which indicates that the device is turn on. Picture 1 2. The Bluetooth is in the state of automatic search when first plug in. At this time, the Bluetooth symbol will always flashing. Using your smartphone , search and connect to “ Freedah Luxury”, Once connected, the Bluetooth speaker will have a prompt tone.
for confirmation. At the same time, the number on date area start flashing, and then repeat the operation or to calibrate the calendar. Step 2: Correct time----When the calendar calibration is confirmed, it will enter the time area for correction. Please repeat step 1. Step 3: Correct week----After adjusting the time, the third step is to enter into the area of week. Please repeat step 1.
V PROBLEMS RESOLVING 1. Phone cannot search for the Bluetooth • Confirm if the Bluetooth is turned on • If you can’t find the Bluetooth when it has been turned on. Check if other devices are connected to the Bluetooth. Please restart the Bluetooth and mobile phone. 2. Bluetooth and mobile phone are always disconnected or have noise after they are connected.