NEXGO T2 POS Terminal User Guide 1
Version Information Shenzhen Xinguodu Technology Co., Ltd. Warning: No part of this publication may be reproduced, transmitted, stored in a retrieval system, nor translated into any human or computer language, in any form or by any means, electronic, mechanical, manual, or otherwise, without the prior written permission of Shenzhen Xinguodu Technology Co., Ltd. All trademarks mentioned are proprietary of their respective owners. Version number:V 1.00 Notice 1. Install software well in this terminal; 2.
Contents SPECIFICATION OF POS TERMINAL ..................................................................................... 4 BASIC SETTING............................................................................................................................ 5 Power on/off.................................................................................................................................. 5 Self-checking ......................................................................................
Specification of pos terminal Item Specifications Processor Qualcomm CPU & Operating frequency of 500 MHz Memory The large capacity 256MB FLASH, 128MB DDR3L SDRAM. Option to be extended to 512M, 256M FLASH/DDR3L SDRAM. OS Linux Power Supply External switch power Input: 100V~240V AC,50/60Hz Output: 8.5VDC, 2.5A Working current electric 1 power port,1 telephone line port,1 LAN port, 1 RS232,1 PINPAD port, 2 USB port(Only for data transmission),1 SAM card,1 dual function PSAM card,1 SD.
Item Specifications Library And Software simulation on PC Remote Downloading ( App. & Configuration) -Scheduling -Full feature license -Independ to the special router - Unlimited connection POS to the TMS - running many operation in according program in a connection for some POS to the TMS ( scenario) -Key Management system -keeping security methods for DATA between POS and TMS TMS Ability implement Hotlist or Black list Language Multi-language, such as English, Chinese, Farsi, Cyrillic, Russia etc.
Self-checking 1. Press “on/off”, “F” and “3” at the same time to power on, then it will prompt “please input password”; 2. Input password “556677” and press “OK” to enter self-checking menu; please “OK” Test app T2 V1.01 Test app 20070622 1.keypad 5.comm Pls press “OK” to continue—→ 2.LCD 2007-6-25 15:10:00 Jun 22 2007 10:27:50 3.Mag-card 4.print 6.IC card 7.accessories 8.
(5) Comm: to test MODEM, GPRS; (6) IC card: to test IC cards slot 1,2 3 and initialization key card; (7) Accessories: to test fingerprint, barcode scanner, voice(not support in T2) and USB and serial port; (8) Clock: to set the current time. Apps download I Kernel download: Note: please prepare both USB and serial port cable before kernel download. 1. please install driver apps according to your PC OS : Secbulk_2000.msi(OS 2000 )/Secbulk_2003(OS 2003).msi/Secbulk_XP.msi(OS XP) 2.
b. Serial port apps download: using PC serial port to upgrade apps. Note: directly connect PC with K3209 by“POS/PINPAN”, don’t need to install USB driver 1. Operation method: press “F” and “6”, and press “CNL” to start pos until it prompt “apps download(COM), please input password”; 2. Input password “556677” and press “OK”, then it will prompt “apps download (COM), downloading, baud rate=115200” 3. Open “T2DL_3.6.7.exe” by PC; 4. Click “read configuration file” to select“app.
if set verify version, (1-YES,0-NO) Verify version: set refund amount Refund amount: set if print details(1-YES,0-NO) Set settlement print: Commercial banks’ code: set local area code Local area code:: If print English receipt: Set if print English receipt Set if print new receipt or old one Select receipt: Default set bank code transaction : set default transaction (1-sales , 0-pre-authorization) ,under the main menu of this function, you could directly enter transaction by brushing card;
Input APN2:set APN2 If needing users: 0-No 1-Yes User name 1: input user name 1 User password 1:input user password 1 User name 2:input user name 2 User password 2:input user password 2 Host IP1:input Host IP1 Host port1:input host port1 Host IP2:input Host IP2 Host port2:input Host port2 Select APN:select using APN(0 or 1) Dynamic IP:set if select dynamic IP Automatic switch:set if automatically switch to dial-up or Ethernet Link method:select link method 0-long link 1-short link Calling times:set ca
Online points:set if support online points Points TPDU:set online points of TPDU IC card parameter:set if support IC cards 4、Terminal key management Key load-in:currently not available。 Key input by hand:set key by hand。 Transaction key index:set transaction key index。 TMS key index:remote download index。 5、change password 1、change administration password 2、change security password 3、reset dominating password 6、other functions Erase transaction batch:Delete all transaction record TMS download:Remote down
6、director setting:after inputting director password, can change time display。 7、energy-saving setting:(not support in T2) 1. enter energy-saving model(15-180s) Set energy-saving time, default 15S. 2. Wehther keyboard locked Set whether keyboard lockable 3. Wehther auto shut-off allowed Set whether auto shut-off allowed. 4.
Void Function:Transaction withdraws including transaction withdraw, pre-authorization void and pre-authorization complete void, which are operated by administrations sometimes are needed because of operation error and other reasons.
4、Use T2 to make pre-authorization transaction, it shows success at the end, meanwhile print authorization receipt。 II Superadd pre-authorization : Function:after pre-authorization transaction succeed, super addition is available。 Operation steps: 1. under main menu choose “4, pre-authorization” then “2, superadd pre-authorization”; 2. swipe card by instruction, and make sure card number is correct; 3. input pre-authorization code( the code corresponding to receipt) and press enter; 4.
5、input amount and press OK; 6、input password, if no password please directly press “OK”; 7、pre-authorization void success and print receipt. VI pre-authorization completion void: Function: Void the actual sales amount which cardholder buys something from merchants. Operation steps:1、under main menu to press“4、pre-authorization”,and select“6、pre-authorization completion void”; 2. Merchants manager input his password and press “OK”; 2、brushing card according to screen prompt or input card No.
Function:Adjust the current batch settlement amount, or supperadd tip of current batch sales, which is only available for visa, mastercard ect. Banking cards. Operation steps:1、under main menu to select “5. Settlement”; 2、select“2. Settlement adjustment” and press “OK”; 3、input original transaction receipt No.
next online until finish uploading. General management operation Reprint Under main menu to press “6. reprint” to enter reprint interface. I reprint the last sales receipt:Reprint the last successful sales receipt, if last sales receipt is not completed then need reprint the last one. II Reprint any sales receipt: input receipt No.
Outline Under main menu to select “7. Management”, then to select “5. Outline” When merchants need to change phone line and having outline, merchants can set outline number by themselves, after setting please save by pressing “OK”, print important parameter list, you can check if setting is ok by important parameter list. System standby Under main menu to select “7. Management”, then “7. Lock POS”, then it will enter system closing interface temporary.
USA Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
We hereby declare that (all essential radio test suites have been carried out and that) the above named product is in conformity to all the essential requirements of Directive 1999/5/EC.