NEXGO G3 POS Terminal User Guide 1
Version Information Shenzhen Xinguodu Technology Co., Ltd. Warning: No part of this publication may be reproduced, transmitted, stored in a retrieval system, nor translated into any human or computer language, in any form or by any means, electronic, mechanical, manual, or otherwise, without the prior written permission of Shenzhen Xinguodu Technology Co., Ltd. All trademarks mentioned are proprietary of their respective owners. Version number:V 1.00 Notice 1. Install software well in this terminal; 2.
Contents SPECIFICATION OF POS TERMINAL ..................................................................................... 4 BASIC SETTING............................................................................................................................ 5 power on/off .................................................................................................................................. 5 self-checking .....................................................................................
Specification of pos terminal Item Specifications Processor Dual CPU, Samsung 32 Bit CPU & 8 Bit CPU Memory Standard 32MB FLASH, 32MB SDRAM. Option to be extended to 128MB 、128MB FLASH/SDRAM, support at least 500 transaction records. OS Linux External switch power Input: 100V~240V AC,50/60Hz Power Supply Output: 8.5VDC, 2.
Item Specifications Complete Set Development Tools For Application Development Through Library And Software simulation on PC Remote Downloading ( App.
waiting…”, after 2 seconds, it will finally power off. Self-checking 1. Press “on/off”, “F” and “3” at the same time to power on, then it will prompt “please input password”; 2. Input password “556677” and press “OK” to enter self-checking menu; please “OK” Test app G3 V1.01 Test app 20070622 1.keypad 5.comm Pls press “OK” to continue—→ 2.LCD 2007-6-25 15:10:00 Jun 22 2007 10:27:50 3.Mag-card 4.print 6.IC card 7.accessories 8.
batch receipt number; ③ Test LAN; input IP address to check if the LAN works well or not; (5) Comm: to test MODEM, GPRS,CDMA; (6) IC card: to test IC cards slot 1,2 3 and initialization key card; (7) Accessories: to test fingerprint, barcode scanner, voice(not support in G3) and USB and serial port; (8) Clock: to set the current time. Apps download I Kernel download: Note: please prepare both USB and serial port cable before kernel download. 1.
5. Click “start” to download apps, after finishing, it will prompt “ download success”; 6. Press “CNL” to exit apps to enter “sign in” interface. b. Serial port apps download: using PC serial port to upgrade apps. Note: directly connect PC with K3209 by“POS/PINPAN”, don’t need to install USB driver 1. Operation method: press “F” and “6”, and press “CNL” to start pos until it prompt “apps download(COM), please input password”; 2.
Current year: set current year Serial number: set current serial number Batch number: set current batch number Verify version: if set verify version,(1-YES,0-NO) Refund amount: Set settlement print: set refund amount set if print details(1-YES,0-NO) Commercial banks’ code: Local area code:: If print English receipt: set local area code Set if print English receipt Select receipt: Default set bank code Set if print new receipt or old one transaction : set default transaction (1-sales , 0-
2.
pre-authorization printer:select the printer types No center: select if no center area Online points:set if support online points Points TPDU:set online points of TPDU IC card parameter:set if support IC cards 4、Terminal key management Key load-in:currently not available。 Key input by hand:set key by hand。 Transaction key index:set transaction key index。 TMS key index:remote download index。 5、change password 1、change administration password 2、change security password 3、reset dominating password 6、other f
3、inquiry operator:inquiry current operator ID。 4、delete operator:delete operator account。 5、operator revise password:operator revise their access password。 6、director setting:after inputting director password, can change time display。 7、energy-saving setting:(Workable when no external power connected) 1. enter energy-saving model(15-180s) Set energy-saving time, default 15S. 2. Wehther keyboard locked Set whether keyboard lockable 3. Wehther auto shut-off allowed Set whether auto shut-off allowed. 4.
payments; 4、follow instruction, enter value amount and press enter; 5、Input password in Pin pad, no password, press enter directly; 6、Use G3 to make payment, screen shows payment success at last, and print receipt. Void Function:Transaction withdraws including transaction withdraw, pre-authorization void and pre-authorization complete void, which are operated by administrations sometimes are needed because of operation error and other reasons.
Operation steps:1、Under main menu choose “4, pre-authorization” then “1, pre-authorization”; 2、swipe card by instruction and make sure card number is correct; 3、input pre-authorized amount and press enter; 3、input password in pin pad, no password, press enter directly; 4、Use G3to make pre-authorization transaction, it shows success at the end, meanwhile print authorization receipt。 II Superadd pre-authorization : Function:after pre-authorization transaction succeed, super addition is available。 Operation s
2、merchants manager input his password and press “OK”; 2、brushing card according to screen prompt or input card No. by hand; 3、input original transaction date; 4、input original authorization code and press “OK”. 5、input amount and press OK; 6、input password, if no password please directly press “OK”; 7、pre-authorization void success and print receipt. VI pre-authorization completion void: Function : Void the actual sales amount which cardholder buys something from merchants.
Print purchasing receipt and upload when next POS online or before next batch settlement online;。 II settlement adjustment: Function:Adjust the current batch settlement amount, or supperadd tip of current batch sales, which is only available for visa, mastercard ect. Banking cards. Operation steps:1、under main menu to select “5. Settlement”; 2、select“2. Settlement adjustment” and press “OK”; 3、input original transaction receipt No.
currency; 4、press “OK”, then G3 will upload settlement command, then G3 will start uploading settlement, until screen prompts “settlement success” and print receipt automatically; Note:If settlement is not correct, G3 will upload report. If uploading report stops, G3 will continue to upload report after next online until finish uploading. General management operation Reprint Under main menu to press “6. reprint” to enter reprint interface.
III Inquiry by receipt No. Input existing receipt No. to inquiry sales records before settelement. Outline Under main menu to select “7. Management”, then to select “5. Outline” When merchants need to change phone line and having outline, merchants can set outline number by themselves, after setting please save by pressing “OK”, print important parameter list, you can check if setting is ok by important parameter list. System standby Under main menu to select “7. Management”, then “7.
—Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Certification information (SAR) This device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). The SAR limit adopted by the USA is 1.