Product Description

Lavalier Microphone
Manual
Model: V3
Shenzhen xingchang Technology Co., Ltd.
Instructions
(1) How to connect a mobile phone to record/record video
Step 1: First, press and hold the receiver and transmitter to
power on and the pairing is successful;
Product Description
Thank you for choosing the produc ts .
This product is an intelligent wireless live broadcast lavalier
microphone which can provide professional-level recording and live
broadcast output plug
and play, no app required. multi-purpose: can
realize webcast video vlog, filming, program interviews, interview
recordings, video teaching and other occasions.
The wireless live broadcast lavalier microphone
is composed of two parts.
(As shown below)
state m ute
Electricity
outdoor indoor
singing bluetooth Electricity
(microphone receiver)
Product parameters
Features
(1) Receiver function introduction
Status mute
battery
Power button: Press and hold this button to power on and off
Battery light: always on when fully charged, flashing slowly when low
power About to shut down and flash quickly
Charging light: The red light is always on when charging,full white light
Short press button to switch mode.
Blinking when not connected, always on when the connection is
successful Charging port/recording output port
Precautions
1. Please disconnect the char
g
er and turn off the machine before cleanin
g
.
2. Non-pro fessionals sh ould not disasse mble the equipment b
y
themselves
to avoid machine failure and loss of warrant
y
ri
g
hts.
(2) Introduction of transmitter function
outdoor indoor singing bluetooth
Electricity
Radio microphone: This part needs to be aimed at the mouth
and used as a vocal radio
Switch on/off/mode switch: long press this key to switch on/off,
short press for mode switch
Microphone volume increase: Short press once, the microphone
volume will increase by one level
Microphone volume reduction: Short press once, the microphone
volume is reduced by one level
Tips
Some mobile phones of Android system cannot use the
built-in camera to record and radio.
A third-party video shooting APP needs to be downloaded,
which can replace some functions of the sound card;
Battery indicator: The indicator is always on when the power is full
flashes slowly when the power is low, and flashes quickly when the
power is about to be shut down
Charging indicator: red light is always on when not fully charged,
white indicator is always on when fully charged
Bluetooth indicato
r: flashes when the Bluetooth is not connected,
and lights up when the Bluetooth connection is successful
(Bluetooth is used as an accompaniment sound source, not for recording)
Mode area:
Singing mode: suitable for live singing, with built-in reverb
Indoor mod e: suitable for short video recording and original sound live
broadcast, with high degree of vocal restoration and no reverberation
Outdoor mode: suitable for short video recording and original sound live
broadcast, with high restoration of vocals and no
reverberation Charging port: monitor headphone port
Note: The transmitter defaults t o outdoor mode when powered on for
the first time and has a memory func tion when powered on again.
Warranty Card
Product number
Customer's name
Step 2: Connect the receiver to the mobile phone with the mobile phone cable;
Step 3: Press the power button on the transmitter to switch to the
outdoor mode (the default outdoor mode is set when the transmitter
is turned on for the first time), and then open the camera and other
APPs in the mobile phone to record and record video.
(2) How to connect the mobile phone to live broadcast
Step 1: First, press and hold the receiver and transmitter to power on,
and the pairing is successful;
Step 2: Connect the receiver to the mobile phone with the mobile phone
cable
; Step 3: Press the power button on the transmitter to switch to live
broadcast mode, and use another mobile phone Bluetooth connection as
the live broadcast accompaniment, open the live broadcast APP in the
mobile phone to broadcast live.
(3) How to connect the camera to record/record video
Step 1: First, press and hold the receiver and transmitter to power on,
and the pairing is successful;
Step 2: Connect the receiver to the camera with the camera cable;
Step 3: Press the pow
er button on the transmitter to switch to the outdoor
mode (the default outdoor mode is set when the transmitter is turned on
for the first time), and then open the camera and other APPs in the
mobile phone to record and record video.
Connect ear monitor
immediately
Rated input: DC5V-=500mA
Pointer type: omnidirectional
Frequency range: 2.4G
Bluetooth: 5.0
Frequency Response Range:
30Hz-18kHz
Interface type: Type-C
Working time: about 6 hours
Working temperature: 0C~45
°C .
Storage temperature: -10°C~50°C
Sensitiv e HD sound
pickup quality
2.4G transmission distance: ≤15
meters (open environment)
Standard charging time: about 2.5 hours
Receiver battery capacity: 200mAh/3.7V
Transmitter battery capacity: 300mAh/3.7V
Body size: 44.5mmx44.5mmx14.1 mm
WARNING! The product contains
a lithium battery:
1. It is forbidden to disassemble,
impact squeeze or throw into fire;
2. If there is a serious bulge, do
not continue to use it;
3. Do not place in high
temperature environment
3. Do not place the device in dire
ct sunlight to avoid premature
aging of electronic parts.
4 Avoid using in dusty or dirty places (dust can easily cause
equipment failure)
5. Do not place the device in a hot or cold environment, or cause
the device to fail to operate normally.·
6. It is recommended that the ambient temperature should not exceed -
10°C -4 0°C, and the relative temperature should be 10%-95%.
7. Do not stuff anything into the device to avoid short
circuit or circuit damage.
8. The product shall not b
e exposed to high temperature
environment such as sunshine and fire.·
9. This manual contains important information, please keep it.
10. Avoid friction and impact between the machine and other hard objects
so as to avoid surface scratches, falling off or other hardware damage.
For example, wireless live broadcast of goods, wireless live
broadcast of singing, can be connected to a sound card to
achieve PK and microphone functions.
Packing List
1. One-to-two char
g
in
g
cable *1
2. T
y
pe-C to 3.5mm cable *1
3. Type-C to Type-C otg cable *1
4. Single ear in-ear headphone cable *1
5. Storage box *1
Purchase date
Contact number
Dealer Contact address
Maintenance records
Warranty:
Non-artificial damage, the whole machine is replaced in one month
one-year free warranty, and limited maintenance within three years.
Note: The company's products are constantly innovating,
subject to change without notice
Manufacturer information
Product Name: Wireless Lavalier Mic
Item model number: V3
Manufacturer: Shenzhen xinghcang Technology Co., Ltd.
Address: 9 / F, buil
ding a, Jianyu second industrial
zone, Xixiang street, Bao'an District,Shenzhen