Doorbell Get alert and capture image of every visitor User Manual 2.
Features 1. 2. 3. 4. LED indicator Microphone Light Sensor Wide-angle Lens 5. Hidden Infrared Lights 6. Speaker 7. Doorbell Button 8. Micro USB Port (Battery Charging) 9.
Indicator Light Flashing RED The device is disconnected to WiFi. It will reconnect automatically. But if it failed, please reset the device and pair again in App. Flashing RED and BLUE alternately Low battery. Please recharge the device. Flashing BLUE The device is capturing images.
Charge the Doorbell Fully charge the doorbell by a 5V1A USB charger and a Micro USB cable. It takes about 10 hours to fully charge. WARNING: Lots of events IIf you have excessive number of visitors, you might need to charge it sooner.
Set up your Doorbell Before You Start 1. Download and install Aiwit App. Scan the QR code below or search for Aiwit on the Apple App Store or Google Play. Download and install the app. 2. Create an Aiwit account. Aiwit Android / iOS App Download Set up your device in the Aiwit app. To pair your device, follow the steps below and in-app instructions. 1. Open Aiwit App and log in to your account. 2. Tap the "+" icon to add new device. 3. Select Video Doorbell, then choose your doorbell model. 4.
Install your Doorbell Mark drill holes and use a bit to drill holes in your wall. Insert anchors and secure your doorbell with mounting and security screws.
Frequently asked questions * You can always ask questions in Customer Service in Aiwit App. The service is free. How to RESET the doorbell To reset, please delete your current device, press and hold the Doorbell Button for around 8 seconds till it flashes red . Then click "+" icon in app, to add device again. How to share the device with my family Open Aiwit App. Tap Settings ( ) icon, then tap Share ( ) icon to get to Sharing Device page.
Transfer device: -Tap the Transfer icon( ), then enter the new users email address. Or, if you want to transfer device to your shared accounts, just choose the shared account. -Tap confirm. Then transfer successfully. Notes: Only the owner account can change settings, delete videos, and share device. Shared accounts don’t have these options. How many users can view the doorbell at the same time? The owner account can share to 8 other accounts.
2. Wi-Fi was weak and the device disconnected from Wi-Fi. Please reconnect to Wi-Fi. The device works with 2.4G Wi-Fi only, please make sure your Wi-Fi is stable, and consider reposition your router to make stronger Wi-Fi for the device. It is very important that the device gets good Wi-Fi, because it is outside of house. How to enable Notifications on my phone There are notifications settings inside Aiwit App, and in mobile settings: 1. Open Aiwit App.
FCC WARNING: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
FCC WARNING: Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not causeharmful interference, and (2) this device mustaccept any interference received, includinginterference that may cause undesired operation.
