Specifications

成品尺寸80X120MM_105G哑粉纸_4C双面印_骑马钉（32P）
编码：10220445
V1消耗完顺切V2版
物料编码:1A10BC0054
（V2版）
深圳湘优
Input:5V=3A,9V=2A
Output:15w(max)
说明书：TechnicalSpecifications
Name：MagneticWirelessCharger
Input:5V=3A,9V=2A
Output:15w(max)
SafetyNotice：
1、Donotpullthepowercardhardtoavoidthepowercardfrombreakingorfallingoff.
2、Donotdisassemblebyyourselforthrowitintofireorwatertoavoidshortcircuitandleakage.
3、Donotuseinseverelyhightemperature，humidityorcorrosiveenvironmentstoavoidleakageofelectricityduetodamagetothecircuit.
FrequentlyAskedQuestions
1、Chargingisslow.Themobilephoneitselfortheexternalreceivingcoilallowsthewirelesschargingcurrenttobedifferent,ortheapplicationrunningrecommendedtoreduceorclosetheapplication.
2、Thephoneischargingintermittently,andtheindicatorlightflashes.Ifthechargingcurrentisnotenough,pleaseuseacharginghead(adapter)withsufficientpower9V/1.67AoraboveQC2.0.
3、Chargingfever,Itisnormalfoethereceivingcoilortransmitterboardtogenerateheatduringwirelesscharging.Itisrecommendedtoadjustthechargingposition.
4、Thechargerdoesnotwork.Donotputmetaldebrisormagneticcardsonthechargingarea.Iftheproductdoesnotworkduetooverheating,pleasetakeoffthephoneandwaitforittocooldownandtrychargingagain.
5、Thehostindicatorisnormal,butthemobilephonecannotwork,Themobilephonereceivingcoilisfaultyorthechargingpositionisnotaligned.Itisrecommendedtoreplacethereceivingcoilorrepairthemobilephone.
6、Theindicatorlightofthehostisnotbright.Ifthehostfails,contactaftersalesmaintenance.

Methodofuse
1.Placenutaroundheadwithbottomfacingcharger,thenfullyinsertballheadintosocket.Tightennuttolockangleinplace.
2.Findsmoothsurfacetoattachchargertothenwipesurfacecleanwithwetwipes.
3.Firmlypressbasetosurface.
4.Pushdownlockinglatchontopofbasetosecurebasestosurface.
5.Adjustlengthandangleofmount,thenrotateknobsclockwisetolockinplace.
6.Pluginchargingpad.attachphonetochargertobegincharging
7.Torepositionmount.unlocklatchandpeelbaseoffsurface.Washbasewithrunningwaterandallowtodrybeforereattaching.
6、Theindicatorlightofthehostisnotbright.Ifthehostfails,contactaftersalesmaintenance.
6.Pluginchargingpad.attachphonetochargertobegincharging
5.Adjustlengthandangleofmount,thenrotateknobsclockwiseto
lockinplace.
4.Pushdownlockinglatchontopofbasetosecurebasestosurface.
ALKOXY
Magnetic Fast Wireless Car Charger
WXC-001
1、Donotpullthepowercardhardtoavoidthepowercard
frombreakingorfallingoff.
SAFETYNOTICE：
2、Donotdisassemblebyyourselforthrowitintofireor
watertoavoidshortcircuitandleakage.
3、Donotuseinseverelyhightemperature，humidityor
corrosiveenvironmentstoavoidleakageofelectricitydue
todamagetothecircuit.
3.Chargingfever,Itisnormalfoethereceivingcoilor
transmitterboardtogenerateheatduringwireless
charging.Itisrecommendedtoadjustthecharging
position.
2.Thephoneischargingintermittently,andtheindicator
lightflashes.Ifthechargingcurrentisnotenough,please
useacharginghead(adapter)withsufficientpower9V/
1.67AoraboveQC2.0.
1.Chargingisslow.Themobilephoneitselfortheexternal
receivingcoilallowsthewirelesschargingcurrenttobe
different,ortheapplicationrunningrecommendedto
reduceorclosetheapplication.
4.Thechargerdoesnotwork.Donotputmetaldebrisor
magneticcardsonthechargingarea.Iftheproductdoes
notworkduetooverheating,pleasetakeoffthephone
andwaitforittocooldownandtrychargingagain.
5.Thehostindicatorisnormal,butthemobilephonecannot
work,Themobilephonereceivingcoilisfaultyorthe
chargingpositionisnotaligned.Itisrecommendedto
replacethereceivingcoilorrepairthemobilephone.
FREQUENTLYASKEDQUESTIONS
Name：MagneticFastWirelessCarCharger
6.Theindicatorlightofthehostisnotbright.Ifthehostfails,
contactaftersalesmaintenance.
7.Torepositionmount.unlocklatchandpeelbaseoffsurface.Wash
basewithrunningwaterandallowtodrybeforereattaching.
6.Pluginchargingpad.attachphonetochargertobegincharging.
5.Adjustlengthandangleofmount,thenrotateknobsclockwiseto
lockinplace.
4.Pushdownlockinglatchontopofbasetosecurebasestosurface.
3.Firmlypressbasetosurface.
2.Findsmoothsurfacetoattachchargertothenwipesurface
cleanwithwetwipes.
1.Placenutaroundheadwithbottomfacingcharger,thenfully
insertballheadintosocket.Tightennuttolockangleinplace.
METHODOFUSE
4.Attackclamptocarvent.
1.unscrewthenutfromthesocket.
3.Tightenthenutclockwise.
2.Placenutaroundballheadwithtopfacingclamp,thenfullyinsert
ballheadintosocket.
5.Magneticallyattachphonetobegincharging.
TECHNICALSPECIFICATIONS
Output:15w(max)
Input:5V=3A,9V=2A