Digital player user manual Ver1.
Thank you for choosing the digital player produced by our company! In order to make your player easy to operate as soon as possible, we are equipped with a detailed user manual, you can get the product introduction, usage and other aspects of knowledge. Before using your player, please read all the information we provide at random so that you can better use the product. When compiling this manual, we are very serious and rigorous, and hope to provide you with complete and reliable information.
responsible for any other indirect losses caused thereby. At the same time, we cannot control the possible misunderstanding caused by users of this manual. Therefore, the Company shall not be responsible for the possible accidental losses during the use of this manual and shall not be responsible for third-party claims caused by the use of this product. Information in this manual is subject to change without prior notice.
Attentions ★ Children are not allowed to play the machine alone. Do not fall or rub against hard objects, which may cause surface abrasion, hard disk damage, data loss or other hardware damage. ★ It is recommended not to use the earphone at high volume continuously. Please adjust the volume to the appropriate volume and control the use time to avoid your hearing loss. That's because using headphones at too much volume can cause permanent hearing damage.
the company is not responsible for any file loss caused by any operation. It is recommended to backup the personal data stored in this machine in time. ★ It is forbidden to use overload power supply, bend the power line forcefully or squeeze the power line with heavy objects to avoid causing heat and fire. ★ Do not expose the equipment to damp environment or rain.If the equipment is flooded or dampened, it may cause equipment failure or even failure to repair.
Introduction 1.Power key 2.Sound3. Sound+ 4. Reset 5. Speaker 6.TYPE-C input 7.Microphone 8. earphone hole 9. TF card slot Quick start 1. Power on: Long press the power button in the shutdown state to enter the boot screen. 2. Power off: Long press the power button to start the power off in the power-on state. 3.
A. Status bar: enter the menu of specific functions. The top bar of the interface is the status bar, displaying information: time, battery level, Bluetooth and wife. B. Function ICONS: On the main interface, the system has 20 ICONS. Click the ICONS to enter various functions or make relevant Settings on the machine. 4. Volume adjustment: Press the upper button to increase the volume, and long press the button to increase the volume to the maximum. 5.
Charging operation and battery management 1.The machine supports USB charging, please connect the USB port with the COMPUTER USB port. new battery should be after a few charge and discharge process, in order to achieve the best performance if does not use this machine for long time, please charge and discharge at least once a month, in order to prevent the damage caused by excessive consumption of battery. if you need the machine dedicated charger, please go to the shop to buy.
push the memory card into the slot and then release it. The memory card will pop up automatically and then take out the memory card. When inserting the TF card, it needs to be done in the state of shutdown to avoid damage to files. Function Long press: Touch the target for more than 2 seconds. Long press the blank area of the main screen to enter the main screen editing state. Slide: Slide your finger across the screen. Drag: Long press the target and move it to another location on the screen.
3. Click the WLAN network to connect. If you choose an encrypted network, you need to enter an access password connection. Connect the bluetooth 1. Slide down from the status bar to open the notification panel, or find Bluetooth in Settings. 2. Turn on the Bluetooth switch. Enter the Bluetooth setting interface and search for the Bluetooth address 3. Click the bluetooth address name to connect to make a paired connection.
2. Navigation bar: The display mode of navigation bar can be selected; 3. Prompt sound and notification: The mode and sound effect of prompt sound can be selected according to needs; 4 application: You can see all the software added to the machine, click the corresponding software to see relevant information, you can also choose to uninstall the software, the native software cannot be uninstalled 5.
4. Account: Can manage the account information of relevant software; 5. Backup and reset: Data in the backup device can be selected, network Settings can be reset, DRM can be reset and factory Settings can be restored; 1、music In the main interface, click the "Music" icon to enter, a list of music files will appear, and click the target file to enter the play interface.
Playback progress: Display the playback progress. Drag the node in the playback status to realize the functions of fast forward and fast backward. Click to position the node to play at the corresponding position Play mode: sequential play (stop after playing the list file), single loop, full loop, random, random repeat, browsing (switch to the next song for 10 seconds) 2. Video: 1. Find the icon of the video on the main interface and click to select the video to be played; 2.
interface, and click to enter the radio function 2. Click“ ”“ ”discover FM. 3. Click the "Menu" in the upper right corner of the interface to select FM recording and FM recording library, etc. 4. Recording: 1. Find the recording icon on the interface and click to enter the recording function; 2. Start recorder:click“ ”start recorder。 1. ON/OFF recorder : click“ ”stop recorder , click again“ recorder. ”start 2. Save recorder:click“ ”save the recorder. 3.
imported or downloaded pictures 2. When displaying the current picture, click the "menu" in the upper right corner to select delete, play the slide, edit, rotate, crop, set the photo as, detailed information, and print (the computer must be connected with the data cable when printing). 3. Editing: Select the image to be edited, and there is an icon in the bottom left corner of the screen. You can select filter, image border, cropping, doodle, color blending and so on. 6. Calendar: 1.
according to the needs of the relevant content; 7. Clock: 1. Alarm clock: To set the alarm clock time as required, click "+" to increase the alarm clock, and click the menu icon in the lower right corner to set the alarm clock duration, alarm clock volume, etc 2. Time: Choose the time zone you want to increase. You can set the style of the clock and automatically make it look like home time. 3. Countdown: You can set the countdown time according to your needs.
Technical rules size screen memory Music format Video format Picture format E-book Recorder format Signal to noise ratio Input type Memory card language system Use temperature Battery Charger 152.5mmx78.8mmx9.3mm 128.3mm×66.6mm×8.5mm 108.2mm×60mm×8.7mm 6inches/5 inches screen,resolution:960×480 4 inches screen, resolution:540×960 8G/16G MP3、OGG、FLAC、AAC、WMA、WAV、APE RM、AVI、RMVB、3GP、FLV、MP4、DAT、MKV、MPG、MOV、TS JPG、BMP、GIF、PNG PDF、TXT、EPUB、FB2 3gp ≥75dB TYPE-C TF card Multi-language Android 6.
The company reserves the right of final interpretation of this manual. FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna.