MOTORCYCLE BLUETOOTH INTERCOM User Manual T12 PRO T12PRO Manufacturer:Shenzhen winnerelec Industrial CO.
QUICK START GUIDE T120 PRO Volume- Earphone port(charing) Volume+ Mesh Intercom button Power button 1
INSTALLATION INSTRUCTIONS First fix the screws on the base, insert the installed base into the left side of the helmet, use the socket head cap screws Tighten the screws with the knife, and install the main unit on the base. If there are any problems with mounting tne bracket, you may use the 3M tape bracket.peel off the protective backing sheet of the 3M tape and adhere the bracket onto the helmet.Pressfor15 seconds and glue dry for 24 hours.
TYPE Basic Operation OPERATION BUTTON COMMANDS Power On T120 PRO Power Off T120 PRO press for one second Volume Up press for one second Volume Down press for one second press for 8 second Check the battery Moblle Phone pairing Mobile Photo press for one second T120 PRO Voice Command (Siri/S-Voice) T120 PRO Answer the call T120 PRO End phone call T120 PRO Reject phone call Answer third party call Reject third party call 3 T120 PRO T120 PRO press for 5 second quick press twice short
TYPE OPERATION BUTTON COMMANDS Moblle Phone Pairing Pairing With Phone MESH Intercom T120 PRO press for 5 seconds When the “T12PRO ”is power off ,hold down the “center key” for 5 seconds.after “T12PRO”the paring state,the red and blue lights flashing alternately . turn on the bluetooth of the mobile phone ,search for new devices,and select the connection when “T12PRO”is found.
TYPE Setting Frequency Range OPERATION BUTTON COMMANDS Enter channel setting press for 2 second surfing the channels quick press twice Save channel and exit press for 2 second If another team is using channel 4(the default channel)and the network intercom is being interfered with,it can be changed to another channels 1 to 10 Intercom No1 and No 2 enter into pairing mode T120 PRO Short press one of the intercom is “power”key to search T120 PRO Bluetooth Intercom Bluetooth Intercom hang up the B
TYPE OPERATION BUTTON COMMANDS Intercom No1 and No 2 enter into pairing mode T120 PRO Short press one of the intercom is “power”key to search short press once Bluetooth Intercom short press once hang up the Bluetooth intercom short press once T120 PRO Universal Bluetooth Intercom Music play T120 PRO Music pause Music Restore factory setting Technical specifications press for 2 second T120 PRO short press once short press once Last song quick press twice Next song quick press twice sh
WARRANTY CARD Purchase Date: Dealer/retailer: QC Iten No: QUALIFIED CERTICI customer Name: Passed 06 customer Tel: customer E-mail: Product Failure Description (Please be sure to fill in your related information so that we can better serve you intime) 7
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PHXIN Rev1.