User's Manual

品牌：MONOPRICE 备注：
第一版，
名称：T20说明书
T20_Monoprice_MP43260_说明书_01
共20P
产品型号：MP43260
说明书尺寸：60mm X 85mm
工艺说明：80g书纸，单色正反面印刷，折扇形。
120.0 mm
封底与封面
页 02-03 页 04-05 页 06-07
页 08-09
页 14-15 页 16-17 页 18-19
页 10-11 页 12-13
60.0 mm
85.0 mm
Harmony Note 200 Portable
Bluetooth® Speaker
P/N 43260
User’s Manual
2 3 4 5 6 7
8 9 10 11 12 13
14 15 16 17 18
SAFETY WARNINGS AND GUIDELINES
Please read this entire manual before using this device,
paying extra attention to these safety warnings and
guidelines. Please keep this manual in a safe place for
future reference.
• Do not expose this device to excessively high
temperatures. Do not place it in, on, or near a heat
source, such as a fireplace, stove, radiator, etc.
• Do not expose this device to excessive vibration,
extreme force
, shock, or fluctuations in temperature
or humidity.
• This device contains a Lithium-ion battery. Dispose of
this device only in accordance with local, state, or
federal regulations for electronic waste.
• Charge the battery before first use and at least once
every two months to keep it fresh and capable of
holding the full charge.
• Clean using a soft, dry cloth only. Do not use chemical
cleaners, solvents, or de
tergents. For stubborn
deposits, moisten the cloth with warm water.
• This device has no user serviceable parts. Do not
attempt to open, service, or modify this device.
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated
to ensuring that your ordering, purchasing, and delivery
experience is second to none. If you have any problem
with your order, please give us an opportunity to make it
right. You can contact a M
onoprice Customer Service
representative through the Live Chat link on our website
www.monoprice.com or via email at
[e-mail] .
Check the website for support times and links.
PACKAGE CONTENTS
Please take an inventory of the package contents to
ensure you have all the items listed below. If anything is
missing or damaged, please contact Monoprice Customer
Service for a replacement.
1x Bluetooth® Speaker
1x USB Type-C® Charging Cable
1x User’s Manual
CHARGING
Charge the battery before first use and at least once every
two months to keep it fresh and capable of holding a full
charge. We recommend that you charge the speaker for
about 10 minutes prior to use, if it has been unused for at
least 7 days.
1. When the Battery Charge Indicator has only one
element illuminated, the battery level is low and
needs to b
e recharged.
2. Plug one end of the included USB Type-C® Charging
Cable into the USB Type-C Charging Port on the
speaker, then plug the other end into a USB power
source, such as a wall charger, power bank, computer,
etc. (available separately). The Battery Charge
Indicator will flash white and the number of
illuminated elements will increase while charging is
in progress.
3. When charging is complete, the Battery Charge
Indicator will be solid white in all four elements.
BLUETOOTH PAIRING
1. Press and hold the Power Button for 3 seconds to turn
the speaker on. When the speaker is first powered on,
it will automatically enter Bluetooth® pairing mode
and the Bluetooth Indicator
will flash shite, indicating
that it is in Bluetooth pairing mode.
If the speaker is already paired to a device and that
device is powered on and within range, the speaker
will attempt to reconnect to the paired device. If it
cannot automatically reconnect to the paired device,
you can either press and hold the Bluetooth Button
for 3 seconds to reconnect the device or proceed
with pairing a dierent device.
2. Open the Bluetooth® settings on your device and scan
for nearby Bluetooth connections.
3. Locate and se
lect the MP43260 entry. If prompted for
a passcode, enter 0000 (four zeros).
4. Once connected, the Bluetooth Indicator will stop
flashing and will illuminate solid white, and an audible
cue will be heard.
AUX PLAYBACK
If your audio device does not have Bluetooth® or if you do
not want to use Bluetooth, you can listen to audio using a
wired connection to the 3.5mm AUX Jack on the speaker.
1. Plug one end of the included 3.5mm Audio Cable in
the 3.5mm AUX Jack on the speaker, then plug the
other end into the headphones or other analog
audio output on your audio source
device.
2. Press the Bluetooth Button to switch between
Bluetooth, AUX, and microSD™ (TF) card
playback.
3. Use the controls on your device to control audio
playback and the volume controls on the speaker to
control the volume. The playback controls on the
speaker do not function with a wired connection.
MICROSD CARD PLAYBACK
This speaker features a microSD™ card slot, which can be
used to play mp3 files on an inserted microSD card.
1. With the speaker powered o, insert a microSD card
with
mp3 files into the microSD Card Slot.
the speaker supports microSD cards with capacities
up to 32GB and
formatted with the FAT16 or FAT32
file system.
The mp3 files on the card can be in any
subdirectory.
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interfe
rence to radio or television reception,
which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Radio Notice for FCC
Caution
This FCC Part 15 radio device operates on a
non-interference basis with other devices operating at
this frequency. Any changes or modification to said
product not expressly approved by Monoprice, including
the use of non-approved antennas, could void the user's
authority to operate this device.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Notice for Industry Canada
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à
la norme NMB-003 du Canada.
Radio Notice for Industry Canada
Caution
This IC RSS-210 radio device operate
s on a
non-interference basis with other devices operating at
this frequency. Any changes or modification to said
product not expressly approved by Monoprice, including
the use of non-approved antennas, could void the user's
authority to operate this device.
This device complies with IC RSS-210. Operation is subject
to the following two conditions: (1) this device may not
cause harmful interference, and (2)
this device must
accept any interference received, including interference
that may cause undesired operation.
2.
Press and hold the Power Button for 3 seconds to
turn
the speaker on.
3.
Press the Bluetooth Button to switch between
Bluetooth, Aux, and microSD™ (TF) card playback.
4. Use the controls on the speaker to control playback
and volume.
BUTTON OPERATION
Power Button
• W
ith power o, press and hold the Power Button for
3
seconds to turn the speaker on. If it has not already
been paired or if its paired device is o or out of
range, the speaker will enter Bluetooth ® pairing
mode. If it has been paired and the paired device is
on and in range, the speaker will reconnect with
your device.
• With power on, press and hold the Power Button for
3
seconds to turn the speaker o. Note that after 10
minutes of no audio playback, the speaker will
automatically turn o.
• Press the Power Button to enable Siri® functionality.
The speaker also supports the Huawei® intelligent
voice assistant.
Bluetooth Button
• With a device paired, b
ut not connected, press and
hold the Bluetooth Button for 3 seconds to
reconnect the last connected device.
• With a device connected, press and hold the
Bluetooth Button for 3 seconds to terminate the
Bluetooth connection.
• Press the Bluetooth Button to switch between
Bluetooth® and AUX, and microSD™ (TF) card
playback.
Play/Pause Button
• W
ith audio playing, press the Play/Pause Button
to
pause playback.
• With audio playback paused, press the Play/Pause
Button
to resume playback.
• At any time, press and hold the Play/Pause Button
for 2 seconds to make a TrueWireless™ Stereo (TWS)
connection with another
43260 speaker.
• When a TWS connection is active, press and hold the
Play/Pause Butoon for 2 seconds to disconnect the
TWS connection.
Volume + and Volume - Buttons
• Press the Volume + Button
to increase the volume
level.
• Press the Volume - Button
to decrease the volume
level.
• Press and hold the Volume + Button for 2 seconds to
skip forward to the next track.
• Press and hold the Volume - Button for 2 seconds to
skip back to the
previous track.
BASS Button
• W
ith Bass Boost o, press the BASS Button to turn
Bass Boost on, Note that Bass Boost is on by
default.
• With Bass Boost on, press the BASS Button to turn
Bass Boost o.
• Press and hold the BASS Button for 5 seconds to
reset the speaker, clearing all pairing information
and resetting the volume level to default.
TWS OPERATION
This speaker features TrueWireless™ Stereo (TWS)
functionality, which allows you to connect two 43260
speakers together to act as a stereo pair, with one speaker
playing left channel audio and the other playing right
channel audio. Perform the following steps to establish a
TWS connection with two 43260 speakers.
1. Press and hold the
Power Button on each speaker
for 2 seconds to turn each speaker on.
2. Press and hold the Play/Pause Button on one of the
speakers for about 2 seconds until you hear a beep
sound. This will be the primary/left channel speaker
in the TWS array.
3. Release the Play/Pause Button and the speakers will
connect to each other. The Bluetooth Indicator on
the primary/left channel speaker will flash blue once
every 3 seconds, while the Bluetooth Indicator on
the right channel speaker will illuminate solid blue.
4. Open the Bluetooth® settings on your phone. Locate
and select the MP43260 entry, which is now the
two
speakers operating as a single stereo speaker array.
To disconnect the TWS array, press and hold the
Play/Pause Button on one of the speakers for 2 seconds
until you hear a beep sound.
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical
support to assist you with any questions you may have
about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your
new product, ple
ase come online to talk to one of our
friendly and knowledgeable Tech Support Associates.
Technical support is available through the online chat
button on our website www.monoprice.com or through
email by sending a message to [e-mail].
Check the website for support times and links.
To download the latest drivers, firmware, manuals, etc.,
go to www.monoprice.com and type the P/N into the
search bar. If available, support files are linked at the
bottom of the product
page.
SPECIFICATIONS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Battery CHarge Indicator
Power Button
Play/Pause Button
Bluetooth® Button
Bluetooth Indicator
Volume - Button
Volume + Button
BASS Button
3.5mm AUX Jack
MicroSD™ Card Slot
USB Type-C® Charging Port
PRODUCT OVERVEW
Dirver size 2x ø52mm
Amplifier Power 2x 10 watts
Nominal Impedance 4Ω
Bluetooth® Version 5
Bluetooth Range Up to 32 feet ( 10 meters )
Bluetooth Pairing Name NP43260
microSD™ Card Capacity 32GB
micro SD Card Formatting FAT16 or FAT32
Waterproof Level IPx7
P/N 43260
Battery Type 7.4V Lithium-ion
Battery Capacity 2200mAh
Charging Time About 3-4 hours
Playback/Talk Time About 10 hours
Input Power 5 VDC, 2.0A
Dimensions 8.1” x 2.6” x 2.8”
(206 x 67 x 71 mm)
Weight 23.1 oz. (655 g)
REGULATORY COMPLIANCE
Notice for FCC
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Modifying the equipment without Monoprice's
authorization may result in the equipment no longer
complying with FCC requirements for Class B digital
devices. In that event, your right to use the equipment
may be limited by FCC regulations, and you may be
required to correct any interference to radio or television
communications at your own expense.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interfe
rence in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
Monoprice™ and all Monoprice logos are trademarks of
Monoprice Inc.
The Bluetooth® word mark and logos are registered
trademarks of Bluetooth SIG, Inc.
USB Type-C® and USB-C® are registered trademarks of
USB Implementers Forum.
microSD™ is a trademark of SD-3C, LLC.
Siri® is a trademark of Apple Inc., registered in the U.S.
and other countries.
Huawei® is a registered trademark of Huawei
Technologies Co., Ltd.
Qualcomm®
is a trade
mark of Qualcomm Incorporated,
registered in the United States and other countries.
TrueWireless™ is a trademark of Qualcomm Technologies
International, Ltd. Qualcomm® TrueWireless™ is a
product of Qualcomm Technologies International, Ltd.
OZ- T20
RF warning statement:
The device has been evaluated to meet
general RF exposure requirement. The device
can be used in portable exposure condition
without restriction.