5. placing Laptop video input device. 6. Fan compartment The fan lattice is where the hot air diffuses. Do not block the air passage completely. 7 b. USB interface Used to connect USB devices. 8. Card reader slot SD/MS/MMC/ card reader. 9. Dc-in socket Connect the power adapter. 10 .VGA port Used to connect external displays. 11. Microphone interface For external microphone. 12. Headphone jack For external headphones. 13.
Special note Do not place anything between the D LCD screen and the keyboard, such as pencils, files, etc. This will damage or scratch the D LCD screen. Do not wipe D LCD screen with corrosive cleaner, which will damage the screen. 2.3 Unpacking and inspection Please remove the packing carefully to take out the machine and other accessories. If any damage or omission is found, Please contact the distributor immediately. Please keep the original packing materials. In case of replacement.
.2 stop the computer When you have finished your work, you can tum off the computer's power or put it into wait or sleep mode: * Close the computer cover » Case the power button Stop mode The method of Restart or use the method again Please follow the operating system shutdown procedure. Directly closed This can prevent the loss of data or software damage. Use the power button. The power supply | In case the system has a hardware or software problem And crash, then use the power bunion shutdown.
Fn+F7 Backbit increase Freeborn Turn on/off the camera Fn+Fg Pause Frisson insert Define [Rise FtF12 mk Delete Built-in number pad Pressing Fn+ Hemlock can start the internal key numeric keyboard, and the number is displayed in the upper right corner of the key. The numeric keypad contains keys for addition, subtraction, multiplication and division. One more press of Circumlocution will restore the original keyboard function. 3.
3.6 the network card Turn on or off the wireless network Your computer has installed a built-in wireless network card, please follow the instructions of the operating system for wireless network Set and join. (please consult your local wireless network service provider) Your computer needs time to connect tirelessly.
4 BIOS(basic input and output system) Settings In this chapter, we will teach you how to enter the BIOS setup program and Settings Various hardware control options will you also meal how to use the built-in Safety protection Settings. [Setup utility is the BIOS (basic l/o system) built into your laptop The hardware state program in. It can perform and maintain many hardware functions. It is software that operates in a menu mode, allowing you to easily set and change Settings.
4.3 Boot (Startup screen and sequence setting of startup equipment) Enable option configuration. The sub-menu is as follows, usually by default. Enable device Settings. The sub-menu is as follows: When there is no external boot device, There is only one boot item on the hard drive.
Select "ADVT Mode" to set whether the video memory is fixed allocation or dynamic allocation With, FIXED /ADVT (dynamic). DVMI/FIXED Memory: the size of FIXED Memory allocation can be set, with the following Maximum ADVT.
Save the Settings and exit BIOS Setup. Exit BIOS Setup without saving the Settings. Discard changes made. Load the default value of high-tech energy. Load the fail safe default.
5 Driver installation and instructions In this chapter, you will learn how to install the driver using the attached disc. Your laptop will be shipped with a driver disc. The disc contains the drive for the device The program. This chapter will show you how to install these drivers. 5.1 to install the driver, please follow the following steps This CD supports Windows XP and Win.
6. Failure analysis and treatment In this chapter, you will learn how to solve general hardware and software problems. Your laptop has been fully tested before shipment and meets the system specifications. However, improper operation or careless delivery can lead to problems. This chapter provides reference and identification information for common hardware and software problems that you may encounter. When you encounter a problem, you can first try to follow the instructions in this chapter.
# The new hard disk may be broken. @& If your laptop has ever suffered from static electricity or a crash, You may have damaged your hard disk. Hard disk execution is too slow @ If your hard drive has been in use for a long time, foo many and messy files can lead to a lot of disk fragmentation. Please go to the > program > attachment > system tool > disk fragmentation program fo perform disk fragmentation. This assignment might take a lite time. ® Your hard disk may be infected with a virus.
®t is normal to see the screen flicker several times when you turn it on or off. Screen bad point Due to the limitations of the LCD manufacturing process, thees are usually some image points on the LCD that cannot display certain colors normally {usually said bad point), this is a normal phenomenon, please rest assured use. Please refer to the Chinese national standard for details. 6.
Special statement This laptop can support a variety of peripheral hardware, such as mouse, Keyboard, printer, scanner. The company guarantees the compatibility and reliability of its products. Please use the product in accordance with the attached instruction manual.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation Is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.