User's Guide

Manual
Packing list
Appearance
Product interface display
Charging Instructions Installation guide Indicator light
Please install the camera in a position where the
field of view is not blocked, and ensure that the
camera is within the coverage of the Wi-Fi network.
Connect the power interface and the power socket
with the power cord to charge the battery.
Scan the QR code below to download and install
the APP
Screw fixing
Mount the camera on a magnetic stand and adjust
the monitoring angle.
Use a drilling tool to drill holes in the wall according
to the hole spacing of the base. It is recommended
to use a pencil to mark the holes in the wall before
drilling. Screw the expansion nut into the hole on
the wall, and then connect the bracket with the nut
with screws to complete the fix.
Mounting bracket
Adjust the angle
Choose a good location for your camera
Download the APP
(1) Please register an APP account and log in.
(2) If you have already registered, please log in
directly.
Register and log in to the APP
2
3
What should I do if the equipment fails?
How far should the camera be from the router?
After testing, the Wi-Fi connection distance can
normally reach 150 meters in an open area. But
the actual situation depends on the strength of
the Wi-Fi and its surroundings (thick walls,
electromagnetic devices, large metal objects can
all cause interference to the Wi-Fi signal). If the
camera connection is weak or unstable, place the
camera as close to the router as possible.
When adding a camera for the first time, make sure
the camera is powered on and the working status
light is Blue flashes slowly. Or hear "Please use
the App for WiFi configuration" from the camera.
Make sure the WiFi account and password are
correct.
Can't add a camera for the first time?
Will the camera display a red light after turning on
the night vision function?
The built-in IR LED lights, when the night vision
is turned on, the camera only displays some faint
red lights, but the picture quality is still clear in the
dark environment.
The camera only supports 2.4GHZ WiFi and does
not support 5G frequency band. Please do not
use 5G WiFi to configure the network.
When adding a camera, ensure that the network is
smooth, and it is recommended to operate close to
the router.
If the QR code network configuration is unsuccessful,
try to use the AP network configuration (the mobile
phone can be automatically added after connecting to
the WiFi hotspot issued by the camera and returning
to the App; the password should not be set as
complicated as possible, and it does not contain
special characters such as \'
If the two methods are still unable to connect to the
Internet, it is recommended to restart the router and
try again.
Provide the nameplate label of the router.
FCC ID:2A7TD-BW4
After inserting the TF card into the TF card slot of
the camera, check whether the capacity of the TF
card is displayed in the "System Settings" - "TF
Card Recording Settings" of the device in the APP.
If it prompts "No TF card detected", it means that
the TF card recognition failed.
Please use brand TF card.
The TF card can be recognized by the computer
normally.
Only FAT32 format is supported.
The recommended TF card capacity is between
2-128G.
It is recommended to use a high-speed TF card of
Class 4 and above.
Try to insert and unplug the TF card several times.
It is recommended to try another TF card.
It may take some time for the camera to recognize
the TF card. After inserting the card, wait for about
30S before observing.
What are the requirements for Wi-Fi?
Please use 2.4GHz wireless network. The device does
not support 5GHz wireless networks. At the same time,
please set the Wi-Fi authentication method to WPA2-
PSK or other lower-level security methods, and need
to set a password.
Long press the power button to restart the camera.
If there is no response, you can open the USB
silicone cover at the bottom of the camera, long
press the reset button to reset, and then long press
the power button to restart the camera.
FAQ
How do I invite family and friends to use my camera
together?
Open the APP and select your camera in the home
page. Click "Share" in the camera settings to enter the
sharing page, and a QR code will be automatically
generated. Your friends can open the app and gain
some access by scanning the QR code in their phone.
Why doesn't the Wi-Fi name appear when I connect to
Wi-Fi?
On Apple devices with iOS 13 and above, you need
to turn on the "Location Permission" of the app in the
system settings and change it to "Allow while in use".
03
08
11
04 05
06
12 13 14
Battery Camera X1
Data cable X1
Screw Pack X1
After opening the package, please confirm whether the
accessories are complete
Base X1
User Guide X1
Network configuration failed
Waiting for network configuration
Network Configuration completed
Blue light flashes slowly
Indicator light
Blue light always on
Green light flashes slowly
Blue light flashes quickly
Red light goes out
Fully charged
Red light always on
Charging
Green light always on
AP mode
Long press the reset button to reset
Disconnected from the network
Device unbinding
When the battery camera is powered on, use the pin to
toggle the reset button for 3-5 seconds, until the blue light
flashes, and a prompt sound of "Please use the APP for
WiFi configuration” is issued, that is, the reset is successful.
Battery camera reset
07
TF card not recognized?
Indicator
Switch
TF card
USB
Reset button
Speaker
Microphone
Photosensitive
indicator
Device status
Device sharing
Device connection
Open permission of Device sharing, the person being shared can
set the function of the device
If the permission is turned off, you can only watch the video, and
cannot set the function.
10
Battery Camera
Please read the Manual carefully before
using the product and keep it properly
Add device
Method 1: Open the mobile APP, click the "+" in the upper
right corner to scan the QR code on the camera, and
complete the device binding according to the guidance of
the mobile phone.
Method 2: Open the mobile APP, please click the "+" in the
upper right corner and select the "QR code not found"
button - one select "WiFi camera", and complete the device
binding according to the guidance of the mobile phone.
09
Warranty Card
User name:
Address:
Telephone:
Fax:
Post code:
E-mail:
Product model (Model):
Product Number (S/N):
Production Date:
Purchase Date:
If you have other requirements, please fill in below:
Dealer: Telephone:
Distribution unit: (seal)
QUALIFIED
CERTIFICATE
QC：PASS
(1)
1.
2.
A:
A:
3.
A:
4.
A:
5.
A:
8.
A:
1)
2)
3)
4)
5)
6)
7)
8)
6.
A:
7.
A:
1)
2)
3)
4)
5)
6)
FCC Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorientation or relocation of the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
To assure continued compliance, any changes or modifications not expressly approved
by the party.Responsible for compliance could void the user's authority to operate this
equipment. (Example - use only shielded interface cables when connecting to computer
or peripheral devices). This equipment complies with Part 15 of the FCC
Rules.Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation. FCC Radiation Exposure Statement:The equipment
complies with FCC Radiation exposure limits set forth for uncontrolled environment.
In order to avoid the possibility of exceeding the FCC radio frequency exposure limits,
human proximity to the antenna shall not be less than 20cm during normal operation.
FCC ID:2A7TD-BW4