User's Manual

18-Nov-2021 1/1
© 2021 Williams-Sonoma, Inc. A
Williams-Sonoma Inc.
Assembly Instructions
Pottery Barn – Pottery Barn Teen – Pottery Barn Kids – Williams Sonoma Home – West Elm – Rejuvenation – Mark and Graham
Important Safety Instructions
1. Turn off the power before cleaning.
2. The product should be cleaned only with a dry cloth.
3. Please make sure the USB port is completely dry before using.
4. To avoid hurting your eyes, do not look directly at the light source for a long time.
5. Do not place the product on a tilted or unstable table to avoid falling damage.
6. Unplug this apparatus if unused for long periods of time.
7. Do not disassemble or refit the product.
8. Press the button with care.
9. Stop using immediately if any unusual issues occur.
10. Always purchase the correct size and grade of battery for this product.
11. Clean the battery contacts and those of the device prior to battery installation.
12. Ensure the batteries are installed correctly with regard to polarity (+ and -).
13. Remove batteries from the product before extended storage.
14. Remove used batteries promptly.
Ambient Tower Light with Device Holder
User Manual
Please read this manual carefully before operating the device and save it for further reference.
Warning: This product contains a button battery.If swallowed, it could cause severe injury or death in just 2 hours. Seek medical attention
immediately.
Included
1.Holder 2.Remote Controller 3.User Manual
Specification
Material:MDF wood+Acrylic panels; Input voltage:DC 5V,550mA; Max power:2.75W
Button functions
1. / - Press once to adjust brightness up/down.
2. - Indicator light.If plug to power,the light shows blue.
If power on,the light will be off.
3 - Press once to power on/off.
4. - Press once for color mode to switch different color of light;Press several times for flash/strobe/fade/smooth mode.
Please connect the USB port to power via the charging adapter before using the light function.
Remote controller
1. The functions of each button show in the illustration on the right.
2. The distance for the remote to control is about 5 meters.
3. Please pull out the insulator in the bottom prior to first use of the remote controller.
FCC Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,and
(2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and the receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Caution:Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to oper
ate the equipment.
Thank you for your purchase!
www.pbteen.com
Customer Service:1-866-472-4001