R7046 PIR User manual_Size 68x104mm_100g双胶纸_骑马钉_中性.
English Indicator light Reset Battery compartment Screw hole Double-sided mounting tape. Bx2 Ax2 Screws 1 R7046 PIR User manual_Size 68x104mm_100g双胶纸_骑马钉_中性.
English Introduction The smart PIR motion sensor detects movement and send real-alert notification to smartphone. Requirement to use 1. Tuya smart app 2. Tuya zigbee gateway (not included) Installation 1. Pu l l t h e i n s u l at i o n s h e e t f ro m b at te r y compartment of the PIR motion sensor. 2. Set up the PIR motion sensor with Tuya smart app. 3. Make sure the PIR motion sensor is in the range of Zigbee gateway's signal. 4. It is recommended to install the PIR motion sensor at 2.2m height.
English Top view Side view Replace battery Take the PIR motion sensor off from bracket base first, then replace the battery. Take PIR motion sensor off from bracket. 3 R7046 PIR User manual_Size 68x104mm_100g双胶纸_骑马钉_中性.
English Remove battery compartment Set up the PIR motion sensor with Tuya smart app 1. Download and install the app "Tuya smart" from Apple App Store or Google Play Store on your mobile device. 2. Launch the app "Tuya smart". 3. Create a new account or log in to your existing account. 4. Tap “+” to add the device. 5. Select the applicable product type from the list of products. 6. Select a Zigbee Gateway. 7. Ensure the indicator light is quick flashing.
English 8. Press confirm button in the Tuya smart app. 9. The app will now search for the device and register is to your account. 10. Enter the device name. Specification Battery: CR2450 x 1 (included) Dimension: 57x57x52mm Detection angle: 110° Wireless connection: Zigbee 3.0 Connection distance: indoor 10-30m Frequency: 2.4-2.483GHz Working temperature: -10℃ - 50℃ Working humidity: 0-95%RH, no condensation 5 R7046 PIR User manual_Size 68x104mm_100g双胶纸_骑马钉_中性.
Caution: This device complies with Part 15 of the FCC rules and Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment.