Instruction Manual

Wireless Charging Desk Clock
Instruction Manual
Model W288
4-Digit Display Time, Temperature, Alarm
Clock, Calendar
4 Brightness Levels Optional
Power-Saving Mode
3 Alarm Clocks Can Be Set, Press Any Button To Close
3 Display Modes: Time + Temperature, Time + Date,
Time+ Second
℃/℉ Two Temperature Unit Optional
LED Display Charging Status
With Memory Function In Case of Power Off
Fast Charging Function
FEATURE
WHAT'S INCLUDED IN PACKAGE
1 x Main Body
1 x USB to Type-C Charging Cable
1 x Instruction Manual
① Type-C USB Input
② SET
③ DOWN
④ UP
⑤ Time Display
⑥ Temperature / Date / Seconds Display
1.INSTALL
Take out the product and the type-c power cord,
insert the cable Type-C connector into the product
input port (on the back), and insert the cable's
another end into the power port (USB port with
QC3.0 is required for quick charging).
After connected the power, the product clock buzzer
beeps, means product power on successfully, and
the wireless charging function of the mobile phone
will be automatically on.
2.WIRELESS CHARGING MODE
Placing：
b)The phone should have wireless charging function.
Attention：
3.TIME SETTING
Wireless charging mode is divided into standard
charging mode and fast charging mode. This product
supports fast charging.
The device can automatically enter fast charging mode
when the USB adapter with fast current output function
and the mobile phone also supports fast wireless
charge.
If the adapter is a normal 5V USB adapter, the device
can only enter the standard charging mode (We
recommended to use the adapter with current 2A and
above).
When the product is on power, put the mobile phone on
the top of the product to start charging automatically,
and the wireless charging icon illuminate.
a)Please note that the wireless sensing position of the
phone should be placed on the wireless charging sign
area of the product.
Please ensure the thickness of phone case is less than
5mm,to avoid unable charging or poor charging
experience.
In standard mode, long press SET more than 2 seconds
to enter time setting
The setting item will flash at a frequency of 1HZ
Setting Sequence:
, back to time mode
Short press UP, set value add 1, long press more than
2 seconds, set value add 8 per second
Short press DOWN, set value minus 1, long press more
than 2 seconds, set value minus 8 per second
Short press SET to confirm setting
No operation for 10 seconds, will confirm setting and exit
Will illuminate in the time under 12hour mode
Year Month Day 12/24 Hour Minute
Exit
afternoon
In standard mode, short press SET to switch alarms AL1
/ AL2 / Al3.
When display alarm clock, short press UP to switch
on/off alarm clock; ON display “A1on”, OFF display “A1-
-”.
When display alarm clock,long press SET to enter alarm
clock setting mode
The setting item will flash at a frequency of 1HZ
Setting Sequence:
Short press UP, set value add 1, long press more than 2
seconds, set value add 8 per second
Short press DOWN, set value minus 1, long press more
than 2 seconds, set value minus 8 per second
Short press SET to confirm setting
No operation for 10 seconds, will confirm setting and
exit
Will illuminate when alarms on
Press any button or pat the device to stop ringing
If no-opeartion, the alarm will ring 5min each time, then
ring again after 5min. It will ring 3 times and automatic
stop.
Hour Minute Exit
pm
4.ALARM CLOCK SETTING
⑧ Wireless Charging Area
illuminate when alarm on
illuminate in the time under 12hour modeafternoon
illuminate when start wireless charging
Buttons Description:
⑦
In standard mode, long press DOWN more than 2
seconds to switch ℃/℉
Temperature range is 0℃— +50℃（32℉— +122℉）
, show HH or LL when out of range
Temperature will automatically update every 60 seconds
Under standard mode, short press DOWN, to adjust
brightness
4 Level brightness, L1/L2/L3/L4, default brightness: L1
In standard mode, long press UP more than 2 seconds
to setting touch control
Under setting touch control, short press UP to switch
on/off touch control, ON with display “Sound on”, OFF
with display “Sound—”
When touch control on, No operation for 10 seconds,
the display screen will switch off. Tap the product can
wake up the LCD display
In standard mode, short press UP to switch display
Mode1:Big screen show time, small screen show
Temperature
Mode2:Big screen show time, small screen show Date,
Month/Day
Mode3:Big screen show time, small screen show Second
For Wireless Charge
Input: 5V/2A, 9V/1.67A, 12V/2A
Output: 5V/1A, 9V/1A, 12V/1.2A
Po we r: 15 W/ 10 W/ 7. 5W /5 W（ 15 W/ 10 W/ 7. 5W
Require QC3.0 USB Charger)
Frequency: 115-205Khz
Efficiency: >70%
Charging Distance: 2-6mm
Material: ABS+PC
Product Size: 162x72x72mm
5.TEMPERATURE SETTING
6.BRIGHTNESS SETTING
7.POWER SAVING SETTING
8.DISPLAY MODE SETTING
9.SPECIFICATION
using this product, basic precautions should always
be followed, including the following:
1. Do not use on aircraft or in hospital.
2. To avoid any risk of injury, close supervision is
necessary when the product is used near children.
3. Do not expose the device to any moisture.
4. Do not use the device in excess of its output rating.
Overloaded outputs above rating mayresult in a risk of
fire or injury.
5. Do not use the device if damaged or modified.
Damaged or modified device may exhibitunpredictable
behavior resulting in fire, explosion or risk of injury.
6. Do not disassemble the device. Seek assistance
from a qualified service person when service or repair
is required. Incorrect reassembly may result in a risk of
fire or injury.
7. Do not expose the device to fire or excessive
temperature Exposure to extreme heat may cause
explosion.
8. Have servicing performed by a qualified repair
person using only identical replacement parts
toensure that the safety of the product is maintained.
9. This device is not a toy.
10. Attachments on the back of your phone can impede
the effectiveness of the wireless charger,lead to
overheating. Please remove attachments from the
phone before charging on this device.
*** KEEP OUT OF REACH OF CHILDREN* * *
10. SAFETY PRECAUTIONS WARNING When
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and
receiver.
--Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV
technician for help. Changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure
limits set forth for an uncontrolled environment. This
transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: 1) this
device may not cause harmful interference, and 2) this
device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
This device complies with FCC RF radiation exposure
limits set forth for an uncontrolled environment. This
transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
FCC statement