Product Specs

ManualsBrandsShenzhen Tongyinhai Precision Electronics ManualsElectronicsBack clip wireless power bank

Shenzhen Tongyinhai

Precision Electronics Co.,

Ltd. Huizhou Branch

Product Speciflcation

DocumentNo Rev

TYH-WI-EN-004 A0

第 1 页共 5 页

Product name

Back clip wireless power bank

Product Model TYH-60071

1. General items

1.1 Test Conditions

Unless otherwise specified, the tests and measurements are to be carried out in

the following standard conditions.

Temperature: 25ºC±3ºC

Relative Humidity: 40%~80%

Air pressure: 86~106 Kpa

1.2 Environmental: Comply with ROHS 2.0 control standard

1.3 Battery maintain instructions for long-term storage

Mobile Power Banks should be on a charge and discharge every 6 Months during

long-term storage,and 60% of the power should be restored,to extend its cycle life.

Written By

/ Date

Checked By

/ Date

Approved By

/ Date

YI.SI.RONG

2021.05.11

Manufacturer：Shenzhen Tongyinhai Precision Electronics Co., Ltd. Huizhou Branch

Summary of content (6 pages)

PAGE 1
Shenzhen Tongyinhai Precision Electronics Co., Ltd. Huizhou Branch Product Speciflcation DocumentNo Rev TYH-WI-EN-004 A0 Product name Back clip wireless power bank Product Model TYH-60071 1. General items 1.1 Test Conditions Unless otherwise specified, the tests and measurements are to be carried out in the following standard conditions. Temperature: 25ºC±3ºC Relative Humidity: 40%~80% Air pressure: 86~106 Kpa 1.2 Environmental: Comply with ROHS 2.0 control standard 1.
PAGE 2
Product Speciflcation Shenzhen Tongyinhai Precision Electronics Co., Ltd.
PAGE 3
Shenzhen Tongyinhai Precision Electronics Co., Ltd. Huizhou Branch Product Speciflcation DocumentNo Rev TYH-WI-EN-004 A0 1,Product overview: This mobile power supply is an intelligent backup power supply designed for mobile digital products. It adopts highly integrated PCB circuit, output high-efficiency DC-to-DC booster conversion circuit, and has a lithium battery protection circuit to achieve accurate voltage overcharge, voltage over discharge, current overload and short circuit protection.
PAGE 4
Shenzhen Tongyinhai Precision Electronics Co., Ltd. Huizhou Branch 8 9 10 11 12 12 13 Product Speciflcation Conversion efficiency Low voltage protection Over current protection Short circuit protection Temperature rise protection Battery Indicator Size / weight DocumentNo Rev TYH-WI-EN-004 A0 (BATT:3.
PAGE 5
Shenzhen Tongyinhai Precision Electronics Co., Ltd. Huizhou Branch Product Speciflcation DocumentNo Rev TYH-WI-EN-004 A0 6、matters needing attention: 1. Do not put the product into the fire or heat the product. Do not store the product at high temperature (recommended ≤ 35 ℃). 2. Do not directly connect the positive and negative electrodes of the battery in the product with metal objects to cause contact short circuit. 3. Do not drop or impact the product or battery with hard objects. 4.
PAGE 6
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.