User manual Model: P2, P2X Brand: Koogeek
QUICK START GUIDE 1. Plug the SmartPlug into a desired outlet. The LED will start blinking green to indicate it is ready for network setup. 2. Make sure your iPhone or iPad (iOS8.1 or later) is connected to a 2.4GHz Wi-Fi network.Using the router utility software, shutdown 5GHz Wi-Fi networks. 3. Download and open the free Koogeek Home app from the App Store. 4. Log in or sign up for aKoogeek account or simply tap Skip. 5.
When the LED blinks green, it indicates you have restored the device to factory settings.
FAQ Why did I fail to add mySmart Plug to the Koogeek Home app 1. Make sure your accessory is powered on and nearby. 2. If you have a dual band router, please shutdown 5GHz Wi-Fi networksand connect your phone to the 2.4GHz Wi-Fi network. 3. Make sure your accessory’s green LED flashes slowly, if not, please press and hold the reset button for 10 seconds to restore factory settings. 4.
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.