VR-651/VR-651B 2 DIN 6.5” Monitor Touch Screen DVD/CD/MP3/MP4 AM/FM Radio Support Bluetooth (Only for VR-651B model) Owner’s Manual Take the time to read through this owner’s manual. Familiarity with installation and operation procedures will help you obtain the best Performance from your new DVD-receiver.
WARNING! To promote safety, certain functions are disabled unless the parking brake is on. The Unit is designed to detect parked status and must be connected to the power supply side of the parking brake switch. Improper connection or use of his connection may violate applicable law and may result in serious injury or damage. To avoid the risk of damage and injury and the potential violation of applicable laws, this unit is not for use with a video screen that is visible to the driver.
CONTENTS WARNING! ................................................................................................................. 2 OPERATION PRECAUTIONS .................................................................................... 2 CONTENTS ................................................................................................................ 3 ACCESSORIES ..........................................................................................................
ACCESSORIES Package contains the following accessories for installation and operation of the unit.
Installation/Un-Installation Note Before starting installation of the unit, make sure the wiring is connected properly. Use only the parts provided with the unit to ensure proper installation. The use of unauthorized parts may cause malfunction. Install the unit where it does not get in the driver’s way and will not injure the passenger in case there is a sudden stop, like an emergency stop.
Wiring Connections Make sure you have good chassis ground. A good ground connection will eliminate most electrical noise problems. A good chassis ground requires a tight connection to the vehicle’s metal chassis. The area around the ground connection should be clean, bare metal without rust, paint, plastic, dust, or dirt for a good electrical connection. Caution: Do not interchange the connection of the wiring!!! For some car models you may need to modify wiring of the supplied power cord.
PANEL 1. IR Sensor IR Remote control signal receiving window. Max distance is 6-8 meters, 45 angels. 2. VOL Button Rotate VOL to increase or decrease the volume. Press it to show the main menu. 3. POWER/MUTE Button Press it to turn on the unit. Press and hold for 2 seconds to turn the unit off .Press the button briefly to Mute .Please note that the volume will be muted on all audio output connector. 4.
REMOTE CONTROL 1. POWER Power on or off. 2. MODE button Press it to select the mode: Radio, DISC (if there is a disc in unit), USB (if there is a USB device in the unit), CARD (if there is a SD/MMC card in the unit) and AV IN. 3. PLAY/PAUSE button In DVD mode, press it to pause playback, press again to resume. 4. Mute/Root button : Short press this button to mute the volume output, press it again to resume volume. 5.
12. SETUP button In DVD mode press it to enter the setup menu. 13. EJECT button Press it to eject the disc. 14. Cursor buttons Use the buttons to select the menu item. the title, track or to show next frame. 15. ANGLE/ACCEPT button (Only for Bluetooth) In DVD mode, press it repeatedly to change the viewing angle (Available only with a recorded DVD file or DVD disc that has this function). In BLUETOOTH mode, press to make a call after inputted a phone number or accept an incoming call. 16.
27. VOL- button Press to decrease volume level. 28. AUDIO/GOTO button In DVD mode press it to select the audio language. In VCD mode, press it to select the sound track in the sequence of MONO L =>MONO R =>STEREO. Go to: in DVD modeˈpress and hold for 2 seconds to show TIME SEARCH menu, select number and confirm to go to certain position directly. When press button to enter TITLE/CHAPTER selection mode, select number and confirm to go to certain TITLE or CHAPTER position directly. 29.
ƹ RADIO PLAYER To start Radio, tap RADIO button on main menu screen. Touch this icon to select MUTE ON or OFF. Touch this icon to select EQ POPėROCKėCLASSėJAZZ FLATėOFF Touch this icon to choose the bands: FM1, FM2, FM3, AM1, AM2. Touch this icon to select LOUD ON or OFF. Touch this icon select LOC ON/OFF or DX for distance station. Touch this icon select stereo or mono sound reception. Slide this icon to select stations. Touch this icon to select station forward manually.
Touch it to pause/play. Touch it to present stop. Touch it to skip to the previous track. Touch and hold for 2 seconds to retune to the beginning of the track. Touch it to skip to the next track. Touch and hold for 2 seconds to activate fast forward (FF) search in a track. Start fast rewind or fast forward. Press one of the keys again to change the spooling speed. Press the Play key to regain normal playback. Touch it to turn on / off random playback. Touch it to enter to next page menu.
ƹAV-IN MODE To start AV-IN Mode, tap on AV-IN button from main menu screen. Connect the external audio/video signal source to this unit. Select AV-IN mode in the main menu or by pressing repeat Mode button on the front panel. Note: If there is no external video input, the TFT displays “NO SIGNAL”. ƹSETTING CONTROL To start SETTING, tap SETUP icon on main menu. Your device has default system settings. You can customize the settings to suit your personal needs.
BLUETOOTH SECTION(Only for VR-651B model) Warning: Driving and having a telephone conversation at the same time is dangerous, please park your car before having a telephone conversation. The supplier waves any and all liability when this warning is not followed. To enter Bluetooth mode, please tap Bluetooth icon on main menu or press mode button on remote. Bluetooth connected mode Tap the icon phone.
Tap icon to see dialed calls history mode. Tap icon to see received calls history mode. Tap icon to see missed calls history mode. The unit can download automatically all the date from the mobile Phone. Dialed /Received/Missed calls are saved In History mode. The calls in each category are orderly saved from the latest one to the final one.. 3. BT MUSIC to listen music in BT mode. You can select the After connect the mobile phone, tap function with the icon for previous, play / pause, and next.
NOTES ON DISC Only use groundless loudspeakers. Use only loudspeakers of minimal 40Watt, using fewer watts may result in damaging your loud speakers at higher volumes. Use 4~8 (Ohm impedance) loudspeakers only; using higher or lesser impedance may damage the unit. Do not use 3-cable loudspeakers and do not connect the loudspeakers minus to the car body. (GND).Using a BTL circuit and each loudspeaker must be connected with insulated cables according the diagram.
TROUBLESHOOTING Symptom LCD CD General Power does not turn on. (No sound is produced.) No sound output when operating the unit with amplifiers or power antenna attached. Cause Remedy Fuse is blown In correct wiring Power antennal lead is shorted to ground excessive current is required or remote on the amplifiers or power antenna. Nothing happens The microprocessor when buttons are has malfunctioned pressed. due to noise, etc.
TROUBLESHOOTING SYMPTOM NO POWER DISC CANNOT BE LOADED. CAUSE THE CAR IGNITION IS NOT ON. THE FUSE IS BLOWN. REPLACE THE FUSE. PRESENCE OF DISC INSIDE THE PLAYER REMOVE THE DISC IN THE PLAYER THEN PUT A NEW UPWARD. INSERT THE COMPACT DISC WITH THE LABEL FACING UPWARD. CLEAN THE DISC OR TRY TO PLAY A NEW ONE. INSERTING THE DISC IN UPSIDE DOWN. DISC CANNOT BE READ. SOLUTION IF THE POWER SUPPLY IS PROPERLY CONNECTED TO THE CAR ACCESSORY SWITCH THE IGNITION KEY TO “ACC”.
TECHNICAL SPECIFICATIONS General Power supply: Current consumption: Maximum power output: Compatible formats: Dimensions (W x D x H) / weight: Working temperature range: ESP function: 11~16V DC max. 10 A 50W x 4 channels (max) DVD/SVCD/VCD/HDCD/MP3/MP4/VIDEO/CDDA/Picture CDCD-R/-RW/DVD±R/±RW playback 185*115*160 mm/2 kg -20ć - +60ć 10 sec. for Audio CD, 120 sec. for MP3 TFT Display Screen size: Resolution: Aspect ratio: Brightness: 6.
FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.