NS-651 2 DIN 6.5' Touch Screen DVD/CD/MP3/MP4 Player AM/FM Radio Support Bluetooth Owner‟s Manual Take the time to read through this owner’s manual. Familiarity with installation and operation procedures will help you obtain the best Performance from your new DVD-receiver.
WARNING! To promote safety, certain functions are disabled unless the parking brake is on. The Unit is designed to detect parked status and must be connected to the power supply side of the parking brake switch. Improper connection or use of his connection may violate applicable law and may result in serious injury or damage. To avoid the risk of damage and injury and the potential violation of applicable laws, this unit is not for use with a video screen that is visible to the driver.
CONTENTS WARNING! ................................................................................................................. 2 OPERATION PRECAUTIONS .................................................................................... 2 CONTENTS ................................................................................................................ 3 ACCESSORIES ..........................................................................................................
ACCESSORIES Package contains the following accessories for installation and operation of the unit. (1) Washer, Spring Washer, M5 Nut 1 each (2) Mounting Strap 1 (3) Bolt 1 (4) Screw 4 (5) Mounting Collar 1 (6) Release Key 2 (7) Screw 1 (8) Rubber Cushion 1 Remote Control ISO cable User Manual Warranty card Trim ring Note: Product image may vary from the actual delivery.
INSTALLATION / UN-INSTALLATION Note Before starting installation of the unit, make sure the wiring is connected properly. Use only the parts provided with the unit to ensure proper installation. The use of unauthorized parts may cause malfunction. Install the unit where it does not get in the driver‟s way and will not injure the passenger in case there is a sudden stop, like an emergency stop.
WIRING CONNECTIONS Make sure you have good chassis ground. A good ground connection will eliminate most electrical noise problems. A good chassis ground requires a tight connection to the vehicle‟s metal chassis. The area around the ground connection should be clean, bare metal without rust, paint, plastic, dust, or dirt for a good electrical connection. Caution: Do not interchange the connection of the wiring!!! For some car models you may need to modify wiring of the supplied power cord.
After connecting, when you start up the reverse gear, the unit will receive the picture from car rear view camera. Note: - Only use groundless loudspeakers. - Use only loudspeakers of minimal 40Watt, using fewer watts may result in damaging your loudspeakers at higher volumes. - Use 4~8 Ω (Ohm impedance) loudspeakers only; using higher or lesser impedance may damage the unit. - Do not use 3-cable loudspeakers and do not connect the loudspeakers minus to the car body (GND).
FRONT PANEL 9 10 11 12 1 2 3 4 5 6 7 8 1. IR Sensor IR Remote control signal receiving window. Max distance is 6-8 meters, 45 angels. 2. EJECT Button Press to eject a disc. If the disc is not removed for about 10 seconds after eject, the disc is reinserted automatically. 3. POWER/MUTE Button Press it to turn on the unit. Press and hold for 2 seconds to turn the unit off .Press the button briefly to Mute .Please note that the volume will be muted on all audio output connector. 4.
REMOTE CONTROL 1. POWER Power on or off. 2. MODE button Press it to select the mode: Radio, DISC (if there is a disc in unit), USB (if there is a USB device in the unit), CARD (if there is a SD/MMC card in the unit) and AV IN. 3. PLAY/PAUSE button In DVD mode, press it to pause playback, press again to resume. 4. Mute/Root button : Short press this button to mute the volume output, press it again to resume volume. 5.
11. Cursor buttons Use the buttons to select the menu item, the title track or to show next frame. 12. SETUP button In DVD mode press it to enter the setup menu. 13. EJECT button Press it to eject the disc. 14. Cursor buttons Use the buttons to select the menu item. the title, track or to show next frame. 15. ANGLE/ACCEPT button (Only for Bluetooth) In DVD mode, press it repeatedly to change the viewing angle (Available only with a recorded DVD file or DVD disc that has this function).
26. OSD button In DVD mode press it to enter the OSD menu, press and hold for 2 seconds to set video setup. (RED /GREEN /BLUE /BRIGHT / CONTRAST /SHARP /COLOR RESET /BACK) 27. VOL- button Press to decrease volume level. 28. AUDIO/GOTO button In DVD mode press it to select the audio language. In VCD mode, press it to select the sound track in the sequence of MONO L =>MONO R =>STEREO.
MAIN MENU The best way to discover the program is to explore each screen in detail, and to find out how to move from one to another. Read this chapter for a guided tour. Unit starts by displaying the Main menu. This is the root of the screen hierarchy, and you can simply access all features by tapping on the touch screen buttons. Tap the icons to enter a desired mode. ◆ RADIO PLAYER To start Radio, tap RADIO button on main menu screen. Touch this icon to select station forward manually.
Note: When a radio signal is not received, the default for ST / MO function, once received radio function automatically converted to ST. ◆DVD PLAYER To start DVD Player, tap DVD icon from main menu screen. TOUCH SCREEN MENU Touch it to skip to the previous track. Touch and hold for 2 seconds to retune to the beginning of the track. Touch it to pause/play. Touch it to skip to the next track. Touch and hold for 2 seconds to activate fast forward (FF) search in a track.
USB device. 2. Warning displays if the vehicle is moving for driver's safety. 3. DVD Player will not only play video, but also picture and music files as well. ◆USB INTERFACE OPERATION USB When a USB is played, the screen will show following interface: To play MP3/ MP4 files from a USB flash memory, insert a USB flash memory into the USB port on the back of the unit. The unit will play automatically MP3/MP4//JPEG files. Press it to repeat REP 1 => REP DIR => REP ALL. Press it to skip to the previous track.
Audio Language: Chinese, English, Japan, French, Spanish, Portuguese, Latin and German. Subtitle Language: Chinese, English, Japan, French, Spanish, Portuguese, German and Off. Menu Language: Chinese, English, Japan, French, Spanish, Portuguese, German and Off. Sound Effect: Adjust EQ and balance surround and field. Subwoofer: Select the frequency 80Hz→120Hz→60Hz →off. Loudness: Turn loudness on or off. Loud Cutoff Freq:400Hz→800Hz→2400Hz. Aspect Ratio: 4:3PS→4:3LB→16:9.
A user can make own choice by tap the buttons. Tap Dial button to enter call mode. Tap In calling button to check received calls. Tap Out calling button to check dialed cal Tap Missed calling button to check missed calls. Tap Phone Book button to use phone book functions. Tap Music button to start Bluetooth Music player. Tap this icon delete paired phone. Tap this button turn to next page. Tap this button turn to previous page. Tap this button disconnected phone.
2. In calling/Out calling mode Tap In calling button or Out calling to see received and dialed calls.The unit can download automatically all the date from the mobile Phone.Dialed/Received/Missed calls are saved In History mode .Tap Up/Down arrow load previous/next history record.The calls in each category are saved from the latest one to the final one.Select a number and tap Send button to enter calling mode. 3.
NOTES ON DISC Only use groundless loudspeakers. Use only loudspeakers of minimal 40Watt, using fewer watts may result in damaging your loud speakers at higher volumes. Use 4~8 Ω (Ohm impedance) loudspeakers only; using higher or lesser impedance may damage the unit. Do not use 3-cable loudspeakers and do not connect the loudspeakers minus to the car body. (GND). using a BTL circuit and each loudspeaker must be connected with insulated cables according the diagram.
TROUBLESHOOTING Symptom LCD CD General Power does not turn on. (No sound is produced.) No sound output when operating the unit with amplifiers or power antenna attached. Cause Remedy Fuse is blown In correct wiring Power antennal lead is shorted to ground excessive current is required or remote on the amplifiers or power antenna. Nothing happens The microprocessor when buttons are has malfunctioned pressed. due to noise, etc.
TROUBLESHOOTING SYMPTOM NO POWER DISC CANNOT BE LOADED. CAUSE THE CAR IGNITION IS NOT ON. THE FUSE IS BLOWN. REPLACE THE FUSE. PRESENCE OF DISC INSIDE THE PLAYER REMOVE THE DISC IN THE PLAYER THEN PUT A NEW UPWARD. INSERT THE COMPACT DISC WITH THE LABEL FACING UPWARD. CLEAN THE DISC OR TRY TO PLAY A NEW ONE. INSERTING THE DISC IN UPSIDE DOWN. DISC CANNOT BE READ. SOLUTION IF THE POWER SUPPLY IS PROPERLY CONNECTED TO THE CAR ACCESSORY SWITCH THE IGNITION KEY TO “ACC”.
TECHNICAL SPECIFICATIONS General Power supply: Current consumption: Maximum power output: 11~16V DC max. 10 A 4 x 50W channels (max) DVD/ VCD/ MP3/MP4/VIDEO /CD/CDR/-RW/DVD±R/±RW/PICTURE PLAYBACK Compatible formats: Dimensions (W x D x H) / weight: 178*170*100 mm/2 kg Working temperature range: ESP function: -20℃ - +60℃ 10 sec. for Audio CD, 120 sec. for MP3 TFT display Screen size: Resolution: Aspect ratio: Brightness: Contrast ratio: 6.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC Warning This device complies with Part 15 of the FCC Rules.
