Smart PTZ Camera Operation Instruction Security Expert for Your Home and Business
Contents 1. Packing list 01 3. Quick start 02 2. Product appearance 3.1 Download and install the app 3.2 Install the camera 3.3 Wi-Fi connected camera 3.4 Ethernet connected camera 3.5 Share the camera 4. Product specification Network port indicator description Video camera specification 5. Firmware upgrade 6.
01 Packing List • Camera • DC power supply X X 1 1 • Mounting kit Special Note : Micro SD card is not included 02 X 1 • Operation instruction 1 Product Appearance Antenna Plastic IP66 Waterproof Smart IR-cut Speaker HD Lens LED Lights Microphone RJ45 Port TF Card Slot Reset Button DC 12V Port 01 X
03 Quick start 3.1 Download and install the The camera supports Android and iOS App. For your best experience, please scan the QR code below to download and install the App and follow the instruction to complete the user registration. Android Download App Store Download 3.2 Install the camera You can install the camera on the wall or ceiling.
2) Install the bracket Screw fixing: Fix the camera to the desired location. You can directly place the camera on a flat surface or fix the bracket to the wall or ceiling by screws.
3.3 Wi-Fi connected camera 1. 1)Place the camera next to the connected Wi-Fi and connect the power cable to the camera.
2. Click the "Add Now" button in the app, double-click the reset button on the camera, and the app will automatically search for devices that are on and not bound. Select the device you want to bind in the search results for the next step. 3. Enter the name and password of the Wi-Fi network you want the camera to connect to. Click Next after completion, and the app will try to connect the camera to the Wi-Fi. 4. After a while, the camera will play a sound indicating that the connection is successful.
Possible problems with binding: When you hear "Password error", check if the Wi-Fi password you entered in the app is correct; When you hear "Authentication method error", please make sure that your Wi-Fi network is not in an enterprise-level network connection mode, as the camera only supports networks with a security level below WPA-2; When you hear "AP does not exist", please check if you have selected or entered the correct Wi-Fi name.
3.4 Wi-Fi connected camera 1. Ethernet connected camera 2. Click the "Add Now" button in the app, double-click the reset button on the camera, and the app will automatically search for devices that are on and not bound. Select the device you want to bind in the search results for the next step.
3. After a while, the camera will play a sound indicating that the connection is successful. At this point, please set a name for the camera on the app and select the location where you want to place the camera. Click Finish to complete the pairing.
1. For admin user of the doorbell, find the doorbell you wish to share on the app homepage or doorbell settings screen, then click the share button and enter the Share page. Click "Device Sharing" to generate a shared QR code. 2. For users who need to be shared with, click "+" on the homepage and select "Add Friend's Device" to enter the scan code page. 3.
04 Product specification Network port indicator description Status Mode Flickering Transmitting Network Connected Lighting Network Anomaly Light off Video camera specification Item Specification Image resolution 1920(H) x 1080(V) 1080P Camera Lens Adaptive Video bit rate Micro SD card (Up to 128 GB) Storage media DC 12V Power 10
05 Firmware upgrade When you connect your camera through the App, it will prompt you if the latest firmware is available. You can also manually check the firmware upgrade in the settings of the App. Note : Please make sure that your camera is fully charged or connected to the power adapter before upgrading the firmware, please do not cut off the power supply during the upgrading.
Wi-Fi signals). If the camera connection signal is weak or unstable, please place the camera as close to the router as possible. Q: How to quickly view videos by category? A: Click the icon in the upper left corner of the "Library" page to start the search filters. Select the search settings and then click save to view the video playback. Q:What should I do when the device is in malfunction? A: Remove the camera, then press and hold the reset button for 3 seconds to restart the camera.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.