Manual
Package contents Mobvoi AI Recorder Manual USB Type - C data wire Quick guide
Device composition Record key On/WiFi fast transfer key Dual microphone array (highsensitivity digital silicon microphone) Front side of AI recorder Magnetic back clip USB-C Rear side of AI recorder
Operation instructions Bluetooth pairing Long press Bluetooth until green indicator flickers 1. Power on, start button is on in green, APP will detect device Bluetooth automatically for connection. 2. If device has been connected to mobile phone Bluetooth, the device will have automatic connection when detect that Bluetooth is enabled.
Start/stop recording 1. Power on, click “Record” and it will shake; recording is started when red indicator flickers. 2. Click “Record” key again to shake, red indicator is off and recording is stopped.
WiFi fast transfer Turn on WiFi fast transfer to speed up transfer of record into mobile phone APP 1. When Bluetooth is connected to mobile phone, click WiFi button again, WiFi blue indicator is on, which means WiFi fast transfer is enabled. 2. The APP will detect WiFi automatically for automatic connection. 3. When APP is connected, enter the device’s folder for data synchronization.
Indicator status Red indicator flickers Recording in process Red indicator is off Recording is completed Green indicator is on Power on Green indicator flickers Wait for Bluetooth connection Green indicator is normally on Bluetooth connection Red indicator is on and then becomes off Power off Red indicator flickers Low power Blue indicator is on WiFi connection enabled Blue indicator flickers WiFi connecting Blue indicator is normally on WiFi connected Yellow indicator flickers OTA upg
Connect new device Operation instructions Firmware version v 1.6.2 Space management 123 h Unbind device Open mobile phone APP → Bluetooth setting, click “Unbind device” to connect the recorder to new mobile phone. The mobile phone can also be connected to new device.
Safety and precautions Safety and Notice Important safety message Please handle the recorder with care to avoid damage, battery liquid leakage, overheat, fire, explosion or personal injuries if it falls down, burns, be pierced, squeezed, dismantled or exposed to high temperature or liquid, for it contains high-sensitivity electronic components (including battery). Do not use if the recorder is damaged. word mark and trademark are owned by Bluetooth SIG, INC.
inserted into power socket for charging. Please be careful if your perception of heat is affected. Please charge the recorder using the charger permitted by manufacturer; otherwise, fire hazard, explosion or scald will occur. Do not touch any exposed metal of USB connection wire when connecting power supply to avoid electric shock.
the recorder in medical places where the recorder is prohibited, or keep safe distance between your recorder and the specific medical device. Please consult your physician and manufacturer of medical device to acquire the operation information of specific medical device if using the recorder along with the medical device. Please stop using the recorder immediately if it is suspected to affect your heart rate regulator, defibrillator or other medical devices.
by the sweat or liquid in charging USB. Make sure to clean the charging USB before you put the charging wire in the packaging box.
Hazardous Substances of Product Name and content of hazardous substances in product Hazardous Substances Part Name Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent Chromium (Cr(Vl)) Polybromi- Polybrominated nated DiphBiphenyls enyl Ethers (PBB) (PBDE) Components of printed circuit board Plastic Metal Battery Accessory This sheet is prepared as per SJ/11364. :Content of hazardous substance of this part in all homogeneous materials is conforming to the limit requirements of GB/T 26572.
Three-guarantee Voucher of Mobvoi AI Recorder Warranty Service For any non-artificial performance failure of the recorder under normal use condition, the consumer of Mobvoi AI Recorder enjoys three-guarantee services as of the date of procurement. 1. For any performance failure within 7 days after procurement, the consumer may return, exchange or repair the recorder. 2. For any performance failure within 15 days after procurement, the consumer may exchange or repair the recorder. 3.
4. The model of product on three-guarantee voucher is inconsistent or modified; 5. The recorder is damaged by Force Majeure.
Sales Records Customer Name: Tel: Address and Postcode: E-mail: Seller (seal): Tel: Address and Postcode: SN No: Procurement Date:
: FCC regulatory conformance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.