Shenzhen Tengtek Industrial all-in-one pc instruction manual Shenzhen Tengtek Technology Co.
Shenzhen Tengtek Directory Industrial all-in-one pc instruction manual.................................................................................. 1 Product description..................................................................................................................... 3 Operating environment.............................................................................................................. 3 Operation instructions.............................................................
Shenzhen Tengtek Product description This product is a customized industrial touch all-in-one pc.The front frame is made of 6mm aluminum alloy to prevent corrosion, the back shell is made of sheet metal, the heat dissipation plate is made of high-performance aluminum alloy, and the machine is made of UV resistant paint process.
Shenzhen Tengtek Operation instructions 1. The machine has M4 VESA mounting holes and mounting screws on the back. During installation, please handle with care and ensure that all screws are tightened to avoid accidental scratches or damage caused by falling off the machine. 2. The machine is equipped with an appropriate power adapter.
Shenzhen Tengtek (4) Fully insert the AC power plug into the AC power socket. Loose plug may cause sparks and fire. (5) When pulling out the AC power cable, hold the plug and do not pull the power cable. (6) Do not leave the machine in standby state when it is not used for a long time. Please pull out the plug from the power socket. (7) Use the power supply specified on the product label. The three-core power supply must be properly connected to the earth to avoid electric shock.
Shenzhen Tengtek 3. Clean (1) Before cleaning the unit, remove the power plug from the AC power socket; otherwise, electric shock may occur. Please wipe the housing with a soft dry cloth.
Shenzhen Tengtek user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.