User's Manual

大小尺寸： 7X10.5CM
Note: To ensure charging 3 devices safely and efficiently, you must use 18W adapter
and quick charging cable (which include in package). Otherwise, you may not charge
3 devices at the same time, also may damage the wireless charger.
3 IN 1 Magnetic Wireless Charger
User Manual
Product Features
1.Compatible for iPhone 12/13 Series magnetic
wireless charging, Qi enable phone, watch, earbuds
wireless charging.
2.Support 15W wireless fast charging for phone,
3W wireless charging for earbuds.
3.Magnetic charging position can be rotated 30°,
allow you to adjust the phone viewing angle.
4.The 18W adapter comes with the wireless charger
support charge phone, watch, earbuds three devices
at the same time. If you want to charge two phones
simultaneously and achieve fast charging, need to
use a 35W adapter.
5.Put the devices into the corresponding charging
area correctly, and the color indicator of the
corresponding area will be on (red for mobile
phone, green for earbuds, blue for watch).
6.When metal foreign objects are detected,
the color indicators corresponding to the positions
of mobile phone and headphone flashes, and the
color indicators corresponding to the position of
watch is off. When over-temperature protection
is detected, the yellow light flashes.
Precautions
1.To achieve fast charging, please use a qualified
power adapter and fast charging cable, otherwise
it may cause unstable charging.
2.If charging stops due to overheated, please
remove the charging devices, and try to re-charge
after cooling down.
3.Do not put metal objects or magnetic cards on the
charging pad, which may cause damage or
abnormality of the charger.
4.Do not clean the product unless make sure it is
power off.
5.Do not disassemble the wireless charger by
yourself, please contact us if necessary.
6.Do not use the product in high temperature,
humid or corrosive environments.
FAQ & Solution
charging position (let the charging coil in your
phone lineup with the one inside the wireless
charger).
(3)The wireless charging coil on Sony phones is
located slightly below center.
(4)Phone cases should be no thicker than 5 mm for
effective charging.
(5)Check whether the adapter is QC3.0 fast charger.
1.How does magnetic wireless charging work？
Firstly make sure your phone has the magnetic
charging function, just need to put the phone on
magnetic charging area. Or if your phone doesn’t has
magnetic charging function, also can put on the
earbuds / phone charging area achieve wireless
charging.
2.If you're experiencing interrupted or slow charging,
check the following:
(1)The back of your phone should not have any
metal, magnetic or credit cards.
(2)Put the phone in the center of the charging
surface, move your phone slightly to find the best
3.If you're failing to charge your device, please try
out the following:
(1)Please restart your cell phone and test with other
USB cables.
(2)Please check whether the indicator light is on or
not.
(3)Please make sure the devices are placed in the
proper position.
4.If you're using the wireless charger with the QC3.0
adapter as suggested and have removed any
potential charging obstructions, but are still
experiencing issues, try this:
(1)Replacing the cable connecting with your wireless
charger.
(2)Rebooting your phone.
(3)Unplug the adapter and reinsert.
5.Charging is still slow:
The mobile phone itself or the external receiving
coil allows the wireless charging current to be
different,or the application running consumption is
large while the mobile phone is charging. It is
recommended to reduce or close the application.
6.The phone is charging intermittently,or the
indicator light flashes:
Input: 9V/3A max
Output: 15W/10W/7.5W/5W (for Phone)
Output: 5W (for Earbuds)
Output: 3W (for Watch)
Transmission Distance: 2-5mm
Color: Black / White
Product Specification
Package List
1* Magnetic Wireless Charger
1* 18W Charging Adapter
1* Type-c Charging Cable
1* User Manual
It may the charging current is not enough, please
use an adapter with sufficient power of 9V/2A or
18W above.
7.Charging fever:
It is normal for the receiving coil or transmitter board
to generate heat during wireless charging. If the
wireless charger is too hot, please take your phone
off it. When the wireless charger is cooled down, you
can charge it again.
8.If there are other problems, please contact our
after-sales for a solution.
MADE IN CHINA
Type-C input port
Indicator light
Watch charging
area (foldable)
How to Use
1.Connect the adapter and type-c cable to power on
the wireless charger.
2.Put devices on the corresponding
wireless charging area.
Wireless Earbuds /
phone charging area
Magnetic charging
area (for phone)
Angle adjust axis
FCC Warning
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment.
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off and
on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment
and receiver.
-Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV
technician for help.
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be installed
and operated with minimum distance 20cm between
the radiator & your body.