Wireless N travel Router A5s User Guide Copyright Statement is the registered trademark of Shenzhen Tenda Technology Co., Ltd. All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders. Copyright of the whole product as integration, including its accessories and software, belongs to Shenzhen Tenda Technology Co., Ltd. Without prior expressed written permission from Shenzhen Tenda Technology Co.
Wireless N travel Router Table of Contents Copyright Statement ........................ 1 Table of Contents ............................................................................... 2 Chapter 1 Product Overview .......................................... 1 1.1 Features ....................................................................................... 1 1.2 Package Content .......................................................................... 2 1.3 Panel Overview .............................
Wireless N travel Router Chapter 4 Web Utility Login..........................................12 4.1 Connect to Device Wirelessly ..................................................... 12 4.2 Login to Web Utility ................................................................... 15 Chapter 5 Mode Toggle & Popup Windows .................16 5.1 Mode Auto‐switch ..................................................................... 16 5.2 Smart Popup Windows ...................................................
Wireless N travel Router Chapter 8 Wireless Settings ..........................................35 8.1 Wireless‐Basic ............................................................................ 35 8.2 Wireless‐Security ....................................................................... 37 8.3 Wireless Access Control ............................................................. 40 8.4 Connection Status ...................................................................... 41 Chapter9 DHCP .............
Wireless N travel Router 11.4 Remote Web‐based Management ........................................... 58 Chapter 12 Routing Settings .........................................60 12.1 Routing Table ........................................................................... 60 Chapter 13 Bandwidth Control .....................................61 13.1 Bandwidth Control ................................................................... 61 Chapter 14 Tools ......................................................
Wireless N travel Router Appendix 2. How to connect to an encrypted wireless network ....................................................................... 74 Appendix 3: Glossary .................................................... 77 Appendix 4 FAQs ........................................................... 79 Appendix 5 EMC Statement ..........................................
Chapter 1 Product Overview Thanks for purchasing this Tenda A5s Designed for those who travel, the Tenda A5s is not only a fashionable and ultra‐compact router, it is also a smart router that can auto‐detect your Internet connection type and intelligently switch between Hotel Mode (Dynamic IP) and Residence Mode (PPPoE). 1.1 Features ¾ Compliant with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.3 and IEEE 802.3u standards ¾ Based on 802.
¾ 1* 10/100M LAN/WAN interchangeable port ¾ Provides Internet connection types: Dynamic/ static IP; can be connected to an xDSL/Cable MODEM ¾ Local/remote web based management ¾ Wireless Roaming technology to ensure high‐efficiency wireless connectivity ¾ Hidden/invisible SSID; MAC‐based wireless access control; ¾ Logs to record device's usage status; ¾ Supports UPnP and DDNS features; ¾ Allow/disallow specified PCs on LAN to access Internet ¾ Provides virtual server and DMZ features; ¾ I
LED Overview: LED Status Power A green and solid light LED Hotel Mode Description Device has electrical power A green and blinking light A green and solid light Status LED Residence Mode A dark blue and blinking light 3 Device is currently operating in hotel mode and WAN port is NOT properly connected Device is currently operating in hotel mode and WAN port is connected Device is currently operating in Residence Mode and WAN port is NOT properly connected
A dark blue and solid light WISP Mode A light blue and blinking light A light blue and solid light Device is currently operating in Residence Mode and WAN port is connected Device is currently operating in WISP Mode and is not connected to a wireless hotspot Device is currently operating in WISP Mode and is connected to a wireless hotspot ¾ Reset: Pressing it for about 7 seconds restores the Device to factory defaults.
modem or other uplink network device when operating in Residence Mode or Hotel Mode; and b) a LAN interface for connection with a PC or an Ethernet switch when operating in WISP Mode. Chapter 2 Hardware Install 2.1 Hardware Install Before you start configuring the device, follow below steps to install device.
place the device in the center of the coverage. 2.1.1 Connect device to a power source Simply plug the device into a electrical outlet nearby. 2.1.2 Network Connection A. For first time use, you must connect to the device wirelessly (Find device's default SSID from the label on the back of the device; by default, device's wireless is unencrypted.).
To configure wireless network adapter, do as follows: a. Right‐click the " your desktop. " icon from the bottom right corner of b. Select the desired wireless network and click “Connect”. c. Enter the customized security key (if any) or simply click "Connect" as there is no preset security key by default. Note: Select "Connect to the network without settings it up" if you are asked to provide a PIN code during connection.
d. When you see “Connected” displayed next to the wireless network you selected, it means you have connected to the wireless network successfully.
Chapter 3 Mode Overview The device provides modes of Hotel, Residence and WISP to meet different network environments. By default, the device can automatically detect your Internet connection type and switch between Hotel mode and Residence mode. You can also disable it if you don't want the device to auto‐switch between the two modes. However you must select and setup the WISP mode manually if you want to use it. 3.
3.2 Residence Mode (PPPoE) In this mode, the device functions as a wireless broadband router, dialing up for Internet connection and delivering Internet access sharing to multiple wireless clients. For typical network topology, see below: 3.3 WISP Mode In this mode, the device functions as a Wireless range extender to relay an existing wifi hotspot and its RJ45 port functions as a LAN port.
11
Chapter 4 Web Utility Login This chapter mainly presents how to log in to device's web utility. 4.1 Connect to Device Wirelessly IMPORTANT: For first‐time use, you must use the wireless network adapter on your PC to connect to the device wirelessly instead of using an Ethernet cable as the device is preset to Hotel Mode (which means the Ethernet port on the device functions as a WAN port) by default. 4.1.1 Setup Wireless Connection(Windows XP is used in below illustration.
Available Wireless Networks". c、 Select the desired wireless network and click “Connect”.
"Connect" as there is no preset security key by default. e、 When you see “Connected” displayed next to the wireless network you selected, it means you have connected to the wireless network successfully.
4.2 Login to Web Utility 4.2.1 Launch a web browser, (say, IE ), input “http : //192.168.2.1”and press Enter. (In case of Internet connection failure, this screen will open automatically, whatever is entered in the web browser) 4.2.2 Enter "admin" in Password field and then click Login. Password is case‐sensitive.) (Note: 4.2.3 You will see below screen if you entered a correct password.
Chapter 5 Mode Toggle & Popup Windows 5.1 Mode Auto‐switch By default, the device can automatically detect your Internet connection type and switch between Hotel Mode (Dynamic IP) and Residence Mode (PPPoE). You can also disable this feature manually if you don't need it.
When in hotel, simply connect the device to the broadband interface there and then to an electrical outlet nearby. The device will detect and switch to Hotel Mode automatically. No need for extra operation! When back at home, simply connect the device to an Internet‐enabled DSL modem or Ethernet network and then to an electrical outlet nearby. The device will detect and switch to Residence Mode automatically.
again" if you don't want to encrypt it, otherwise you will see this window every time you start the device. (Tips: For security purpose, it is highly advisable that you encrypt your wireless network.) When operating in Residence Mode for the first time, system will pop up a dailup window, prompting you to enter a user name and a password required for PPPoE Internet connection.
Chapter 6 Mode Setup 6.1 Hotel Mode (Dynamic IP) Setup No need for configurations in this mode! The device is wirelessly accessible to all wireless clients within coverage. (For connection diagram, see section 2.1.
Connect device as below: Normally, Internet access in hotels is DHCP/dynamic IP, which means devices connecting to hotel network can obtain IP address automatically. So, simply connect the device to the broadband interface in hotel, and Internet access shall be shared by multiple wireless clients. Note that you must set these PCs to "Obtain an IP address automatically" and "Obtain DNS server address automatically" (For details, see appendix 1).
2. And you will enter the interface for configuring basic wireless settings. ¾ ¾ SSID: A SSID (Service Set Identifier) is the unique name of a wireless network. To connect to the device wirelessly, you must know its SSID. Channel: For an optimal wireless performance, you may select the least interferential channel. It is advisable that you select an unused channel or “Auto” to let device detect and select the best possible channel for your wireless network to operate on from the drop‐down list.
method to secure your wireless network. Note down the self‐defined security key for future use. You must provide it for wireless connections later. It is advisable that you select the WPA‐PSK>AES encryption method for better security. Simply enter 8‐63 alphanumeric characters or other symbols in the Security Key field. For detailed configurations, see sections hereunder. Click "Next" to continue when finishing above settings. 3. You shall come to the Internet connection setup interface.
¾ ¾ ¾ ¾ Configure device's WAN MAC address (Optional). Normally you don't need to change device's default WAN MAC address. However, some ISPs may bind client PC's MAC address for Internet connection authentication. In this case, simply enter the bound MAC in the WAN MAC Address field or click "Copy My PC's MAC" to populate the field automatically. (Config above settings using the PC whose MAC address is bound with your ISP.) WAN MAC Address: Config Device’s WAN MAC address.
For methods of configuring more and featured functionalities, read sections hereunder. 4. Click Finish and reboot device to activate new settings. Note: In this mode, the device's RJ45 port functions as a WAN port for Internet connection. When activated, clients can only connect to the device wirelessly. 6.3 WISP Mode Setup To amplify uplink device's wireless signal (extend wireless coverage), select this mode manually. 1. Select "WISP Mode" and then click "Next'.
2. You shall now come to the WISP mode setup screen. ¾ ¾ ¾ ¾ SSID: A SSID (Service Set Identifier) is the unique name of a wireless network. Enter the SSID of your WISP's AP that you are going to connect to. MAC Address: Enter the WISP's MAC address that you are going to connect to. Wireless MAC address is also known as BSSID. Channel: Select the channel which your WISP's AP (to which the device is going to connect) is currently operating on.
For convenience purpose, it is advisable to use the “Open Scan” option to search and select the link partner to add certain settings to the device automatically. Click "Next" to continue when finishing above settings. 3. And you will enter the interface for configuring basic wireless settings. ¾ SSID: A SSID (Service Set Identifier) is the unique name of a wireless network. To connect to the device wirelessly, you must know its SSID.
method for better security. Simply enter 8‐63 alphanumeric characters or other symbols in the Security Key field. For detailed configurations, see sections hereunder. Click "Next" to continue when finishing above settings. 4. You shall now enter the Internet connection setup screen. ¾ DHCP This is the default Internet connection type. No configurations are required for this connection. Simply select Dynamic IP and click Next if your ISP is using this connection.
¾ PPPoE Select PPPoE, if your ISP is using a PPPoE connection, enter the PPPoE user name and password provided by your ISP in corresponding fields. Contact your ISP for help if you are not clear about or unfortunately forget this info. Click "Next" to continue when finishing above settings. For example: Assuming that your ISP provides you with a user name: pppoe_user and a password: pppoe_passwd, then simply enter them in corresponding fields as seen on the screenshot.
For methods of configuring more and featured functionalities, read sections hereunder. Note: It is strongly recommended not to change the channel settings when using this mode, as improper change may cause connection failure. Click Finish and reboot device to activate new settings Important: The device must share identical channel, security (including security key), extension channel (if any) settings with the link partner to achieve successful connection in this mode.
Chapter 7 Network Setup 7.1 LAN Setup This section allows you to config the TCP/IP settings for the device’s LAN interface. IP Address: Device's LAN IP address, 192.168.2.1 by default. You can change it according to your needs; just remember to use the new one to log on to the device’s web utility if you changed it. Subnet Mask: Device’s LAN subnet mask, 255.255.255.0 by default. Note: If you change the device’s LAN IP address, you must use the new one to log on to the web‐based configuration utility. 7.
PPPoE ¾ ¾ ¾ ¾ ¾ ¾ Internet connection Type: Displays the current Internet connection type. User Name: Enter the User Name provided by your ISP. Password: Enter the password provided by your ISP. MTU: Maximum Transmission Unit. DO NOT change it from the factory default of 1480 unless necessary. You may need to change it for optimal performance with some specific websites or application software that cannot be opened or enabled; in this case, try 1450, 1400, etc.
If your ISP assigns a fixed IP address to you, then select Static IP, and enter the IP address, subnet mask, primary DNS and secondary DNS (optional) info provided by your ISP in corresponding fields. ¾ IP Address: Enter the WAN IP address provided by your ISP. Consult your ISP if you are not clear. ¾ Subnet Mask: Enter WAN Subnet Mask provided by your ISP. The default is 255.255.255.0. ¾ Gateway: Enter the WAN Gateway provided by your ISP. Consult your ISP if you are not clear.
Select auto (auto‐negotiation), 10M half duplex, 10M full duplex, 100M half duplex or 100M full duplex depending on your network environment. The WAN port speed/duplex mode must match that of the link port to achieve successful communication; otherwise, the WAN port may not function properly. So, if you are not sure about the link port’s speed/duplex mode, please select “Auto”.
Normally you don't need to change device's default WAN MAC address. However, some ISPs may bind client PC's MAC address for Internet connection authentication. In this case, simply enter the bound MAC in the WAN MAC Address field or click "Copy My PC's MAC" to populate the field automatically. (Config above settings using the PC whose MAC address is bound with your ISP.) ¾ WAN MAC Address: Config Device’s WAN MAC address.
¾ ¾ ¾ DNS: Check/uncheck to enable/disable the DNS server feature. Primary DNS Server: Enter the DNS address provided by your ISP. Secondary DNS Server: Enter the other DNS address if your ISP provides 2 such addresses (optional). Chapter 8 Wireless Settings 8.
¾ ¾ ¾ ¾ 802.11 Mode: Select a right mode according to your wireless client. 11b mode: Select it if you have only Wireless‐B clients in your wireless network. 11g mode: Select it if you have only Wireless‐G clients in your wireless network. 11b/g mixed mode: Select it if you have only Wireless‐B and Wireless‐G clients in your wireless network. 11b/g/n mixed mode: Select it if you have Wireless‐B, Wireless‐G and Wireless‐N clients in your wireless network.
¾ ¾ ¾ within coverage when they perform a scan to see what’s available. When disabled, this SSID becomes invisible to any wireless clients within the coverage. Manually enter the SSID if you want to connect to it. Channel: For an optimal wireless performance, you may select the least interferential channel. It is advisable that you select an unused channel or “Auto” to let device detect and select the best possible channel for your wireless network to operate on from the drop‐down list.
key, meaning that it dynamically generates a new key for each packet. WPA also includes a message integrity check feature to prevent data packets from being hampered with. Only authorized network users can access the wireless network. WPA adopts enhanced encryption algorithm over WEP. Cipher Type: Select AES (advanced encryption standard) or TKIP (temporary key integrity protocol). Security Key: Enter a security key, which must be between 8‐63 ASCII characters long.
¾ ¾ ¾ Cipher Type: Select one cipher type from AES (advanced encryption standard), TKIP (temporary key integrity protocol) or TKIP&AES. Security Key: Enter a security key, which must be between 8‐63 ASCII characters long. Key Renewal Interval: Specify a valid time interval for the key to be updated. 8.2.3 Mixed WEP WEP is intended to provide data confidentiality comparable to that of a traditional wired network.
¾ ¾ ¾ ¾ Security Mode: Select a proper security mode from the drop‐down menu. Here we select Mixed WEP. WEP Key: Select ASCII or Hex. Note: Enter 5 or 13 ASCII characters (Invalid characters like / “ and ‘, etc are not allowed) if you select ASCII or enter 10 or 26 HEX characters if you select Hex. Note that you must enter the key content in the corresponding format selected. Default Key: Select a key from the preset keys 1‐4 for current use. 8.
¾ MAC Filter: "Allow Access to Wireless Network" only allows PCs at specified MAC addresses (in the list) to connect to your wireless network; Deny Access to Wireless Network: Block only PCs at specified MAC addresses from connecting to your wireless network. ¾ MAC Address: Enter the MAC address of a wireless client which you want to allow or disallow to connect your wireless network. Add: Click to add the MAC address. ¾ MAC Address List: Displays added MAC address entries.
¾ ¾ MAC Address: Displays MAC addresses of wireless clients connected to the Device. Bandwidth: Displays channel bandwidth used by currently connected hosts (wireless clients).
Chapter9 DHCP 9.1 DHCP Settings The Dynamic Host Configuration Protocol (DHCP) is an automatic configuration protocol used on IP networks. If you enable the built‐in DHCP server on this device, it will automatically configure TCP/IP protocol settings for all DHCP‐Client‐enabled PCs in your LAN (Namely, PCs are set to "Obtain an IP address automatically" and "Obtain DNS server address automatically"), including IP address, subnet mask, gateway and DNS etc, eliminating the need for manual intervention.
¾ Lease Time: The length of time for the IP address lease. Configuring a proper lease time improves the efficiency for the DHCP server to reclaim disused IP addresses. ¾ For example: If the lease time is set to one hour, then the DHCP server will reclaim disused IP addresses every hour. 9.2 DHCP Client List &Reservation DHCP Client List displays information of devices that have obtained IP addresses from the device’s DHCP Server.
¾ Lease Time: Displays remaining time for a corresponding IP address lease.
Chapter 10 Virtual Server The virtual server feature is only available in WISP Mode and Wireless Router Mode. 10.1 Port Forwarding Port Forwarding allows you to open a range of WAN service ports and redirect all traffic received through such ports to a LAN server at a designated IP address. It allows remote computers, such as PCs from Internet, to access web servers, ftp servers, e‐mail servers, gaming and other specialized Internet applications on a private local area network (LAN).
LAN. Protocol: Includes TCP, UDP and Both. Select “Both” if you are not sure about which protocol to use. ¾ Enable: The corresponding entry takes effect only if you checked this option. ¾ Delete: Click to remove a corresponding entry/rule. Well‐Known Service Port: The “Well‐Known Service Port” lists widely used protocol ports. Simply select a port, an entry ID and click the "Add to" button to populate the selected port to the corresponding fields of the selected entry.
should assign a static IP address to the PC designated as a DMZ host (DHCP Server> DHCP Client List> DHCP Reservation) before using the feature. ¾ DMZ Host IP: Enter the IP address of a computer on your LAN which you want to set as a DMZ host. ¾ Enable: Check/uncheck to enable/disable the DMZ host feature. For example: To set a PC at 192.168.2.10 to a DMZ host for intercommunication with another host on the Internet, config the same settings as shown on the screenshot on the device.
device to perform special port forwarding so as to enable external hosts to access resources on internal hosts. Enable UPnP: Check/uncheck to enable/disable the UPnP feature. Chapter 11 Security The Security feature is only available in WISP Mode and Wireless Router Mode.
11.1 Client Filter To better manage PCs in LAN, you may use the Client Filter functionality to allow or disallow PCs within a specified range of IP addresses to access Internet. Click “Add” to enter page below: Filter Mode: Select Deny or Allow according to your own needs.
Deny Access to Internet: Disallow specified packets to pass through the device; other packets are processed according to default mode. Allow Access to Internet: Allow specified packets to pass through the device; other packets are processed according to default mode. ¾ Description: Briefly describe the current entry/rule. ¾ IP Address: Specify a single IP address or an IP range of PCs for current rule to apply to.
Click “Save” and you will find such entry in the List below. Select Allow from the Default Mode drop‐down list and check Enable Client Filter feature. 11.
use the MAC Filter feature to allow or disallow specified PCs to access Internet. Click “Add” to enter page below: ¾ ¾ Filter Mode: Select Deny or Allow according to your own needs. Deny Access to Internet: Disallow specified packets to pass through the device; other packets are processed according to default mode. Allow Access to Internet: Allow specified packets to pass through the device; other packets are processed according to default mode. Description: Simply describe current rule/rule.
¾ MAC Address: Enter the PC’s MAC address that you want to filter out or select it from the MAC list. ¾ Time: Select a time range for current rule to take effect. ¾ Day: Select a day or several days for current rule to take effect.
Click “Save”, select “Allow” from the “Default” drop‐down list and check the “Enable MAC Filter” feature. 11.3 URL Filter To better regulate LAN PCs, you may use the Website Filter (also known as URL Filter) functionality to allow or disallow such PCs to access certain websites within a specified time period.
¾ Filter Mode: Select Deny or Allow according to your own needs. Deny Access to Internet: Disallow specified packets to pass through the device; other packets are processed according to default mode. Allow Access to Internet: Allow specified packets to pass through the device; other packets are processed according to default mode. ¾ Description: Briefly describe a current entry/rule. ¾ IP Address: Specify a single IP address or an IP range of PCs for current rule to apply to.
range of 192.168.2.20~192.168.2.30 on your LAN to access only "yahoo.com" from 8:00 to 18:00 during working days (Monday‐ Friday) while not restricting other PCs, then config same settings as shown on below screenshot on your device: Click “Save” and you will find such entry in the List below.
devices) feature. 11.4 Remote Web‐based Management The Remote Web Management feature allows the Router to be managed from the Internet via a web browser. ¾ Enable: Select whether to enable the Remote Web‐based Management feature. ¾ Port: Remote admin port; the port used by trusted hosts from Internet or other external networks to access and manage the Router remotely.
Leaving the IP address field at "0.0.0.0" makes the device remotely accessible to all the PCs on Internet or other external networks; populating it with a specific IP address, say, 218.88.93.33, makes the device only remotely accessible to the PC at the specified IP address. For example: If you want to allow only the PC at the IP address of 218.88.93.33 from Internet to access Device’s web‐based utility via port: 8080, then configure the same settings as shown on the screenshot above on the device.
Chapter 12 Routing Settings 12.1 Routing Table This page displays the device core routing table which lists destination IP, subnet mask, gateway, hop count and interface. The principal task for a router is to look for an optimal transfer path for each data packet passing through it, and transfer it to the specified destination. So, it’s essential for a router to select an optimal path, i.e. routing algorithm. To complete this work, the router stores and maintains related data of various transfer paths, i.
Chapter 13 Bandwidth Control Use this section to manage bandwidth allocation to devices on your LAN. 13.1 Bandwidth Control Enable the bandwidth control feature and you will see below screen. ¾ ¾ ¾ ¾ ¾ IP Address: Enter an Identical IP or two different IPs in both boxes to specify only a single IP address or an IP range. Upload Limit: Max total upload bandwidth for a specified PC or a range of PCs. Download Limit: Max total download bandwidth for a specified PC or a range of PCs.
¾ Delete: Click to remove a corresponding entry/rule. Chapter 14 Tools 14.
This section lets you configure, update, and maintain the correct time on the internal system clock. You can either select to set the time and date manually or automatically obtain the GMT time from Internet. Note that the GMT time is obtained only when Device is connected to Internet. You can also configure the system time manually. ¾ Internet time servers: Time and date will be updated automatically from Internet if enabled.
14.2 DDNS Dynamic DNS or DDNS is a term used for the updating in real time of Internet Domain Name System (DNS) name servers. We use a numeric IP address allocated by Internet Service Provider (ISP) to connect to Internet; the address may either be stable ("static"), or may change from one session on the Internet to the next ("dynamic"). However, a numeric address is inconvenient to remember; an address which changes unpredictably makes connection impossible.
¾ ¾ ¾ ¾ drop‐down menu. User Name: Enter the DDNS user name registered with your DDNS service provider. Password: Enter the DDNS Password registered with your DDNS service provider. Domain Name: Enter the DDNS domain name with your DDNS service provider. For example: If you have registered a DDNS service in dyndns.org and are allocated with tenda, 123456, tenda.dyndns.info respectively as username, password and domain name for a web server on your PC at 192.168.2.
To backup settings: Once you have configured the device the way you want it, you can save these settings to a configuration file on your local hard drive that can later be imported to your device in case that the device is restored to factory default settings. To do so, click the “Backup” button and specify a directory to save settings on your local hardware. Click Save to save the configuration file.
Click the "Restore" button to reset your device to previous settings. 14.4. Restore to Factory Default Settings Click this button to reset the device to factory default values.
Factory Default Settings: ¾ Password: admin ¾ IP Address: 192.168.2.1 ¾ Subnet mask: Enter 255.255.255.0. Note: To activate your settings, you need to reboot the device after you reset it. 14.5 Firmware Update Firmware upgrade is released periodically to improve the functionality of your device and also to add new features. If you run into a problem with a specific feature of the device, log on to our website (www.tendacn.com) to download the latest firmware to update your device.
automatically when update completes. NOTE: Do not disconnect the device from the management PC (the PC you use to configure the device) or power supply during update; otherwise, it may be permanently damaged. 14.6 Reboot This section allows you to reboot the device. New settings will be activated after reboot. And WAN connection will be disconnected during reboot. Reboot: Click to restart the device. 14.
New Password: Enter a new password. Confirm New Password: Re‐enter the new password for confirmation. Save: Click to save your new password. Caution: For security purpose, it is highly recommended that you change Device's default login user name and password. 14.8.1 Logs The Logs option allows you to view all events that occur upon system startup Up to 150 entries of logs can be recorded. ¾ Refresh: Click to update current logs. ¾ Clear: Click to remove all logs.
automatically”(enable DHCP client on your PC)and your PC will be able to access Internet via the device.Follow below steps: Here we take Windows 7 OS as an example for illustration. From the desktop, right‐click Network > Properties. Left click "Change adapter settings". Right click Local Area Connection(or Wireless Network Connection if your are connecting to the device wirelessly)and select Properties.
Select "Internet Protocol Version 4 (TCP/IPv4)" and click "Properties". Select”Obtain an IP address automatically”.
Right click Local Area Connection and select Status>Details to check whether your PC has obtained an IP address successfully.
Appendix 2. How to connect to an encrypted wireless network How should I config my network adapter to successfully connect to an encrypted wireless network? (Below explains how to connect to a WPA‐encrypted wireless network in Windows 7 OS) To connect to an encrypted wireless network, you must provide a valid security key. To configure wireless network adapter, do as follows: 1. Right click “Network”, select "Properties", and then left click "Change adapter settings".
2. Right click the Wireless Network Connection and select “Connect/Disconnect”. All searched wireless networks shall be displayed in below screen. If you don't see the SSID of Tenda, click Refresh. 3. Double click or select the SSID entitled “Tenda_××××××” (where×××××× represents the last 6 characters in the device MAC address) and click “Connect”.
window (Note that security key is case‐sensitive. Here we assume it is tendatenda) and click “OK”. 4. As seen below, display of “Connected” next to “Tenda_××××××” indicates a successful connection.
Appendix 3: Glossary Channel A communication channel, also known as channel, refers either to a physical transmission medium such as a wire or to a logical connection over a multiplexed medium such as a radio channel. It is used to transfer an information signal, such as a digital bit stream, from one or more transmitters to one or more receivers. If there is only one AP in the range, select any channel you like. The default is Auto.
must set all Aps’ SSID to the same name. Wired Equivalent Privacy (WEP) is a security algorithm for IEEE 802.11 wireless networks with the intention to provide data confidentiality comparable to that of a traditional wired network .WEP, recognizable by the key of 10 or 26 hexadecimal digits, is widely in use. WEP uses the stream cipher RC4 for confidentiality,[5] and the CRC‐32 checksum for integrity.
Windows XP SP1. Appendix 4 FAQs This section provides solutions to problems that may occur during installation and operation of the device. Read the following if you are running into problems. If your problem is not covered here, please go to our website of www.tendacn.com or e‐mail to support@tenda.cn for help. 1. Q: I entered the device’s LAN IP address in the web browser but cannot access the utility.
connected to the device or not. If ping succeeds, then check whether the Proxy Server feature is enabled on your browser. If enabled, disable it immediately. In case that ping fails, press and hold the "RESET" button on your device for 7 seconds to restore factory default settings, and then run “ping192.168.2.1” again. 4) Contact our technical support for help if the problem still exists after you tried all the above. 2.
address automatically, please ensure that the router's DHCP function is enabled. DHCP can automatically assign an IP address to your computer. If there is no DHCP server available on your network, please set a static IP address and fill in gateway and DNS, otherwise you cannot access Internet. 5. Q: I cannot access Internet and send/receive emails; what should I do? This problem mainly happens to users using ADSL dialup or dynamic IP Internet connection types.
Step 2: Click “Advanced” and select “Port Range Forwarding” (Also known as Port Ranging) on the Router’s web interface. Step 3: Input the start service port (also known as External Port on some devices) NO, say, 80. Step 4: Input the end service port (also known as Internal Port on some devices) NO, say, 80. Step 5: Input the internal server’s IP address. For example, assuming that your Web server’s IP address is 192.168. 2.10, then simply input it.
8. Q: I cannot access Internet in WISP Mode; what should I do? a. Make sure your wireless network adapter is functioning correctly on your PC and wireless signal is strong enough. If there are too many available wireless networks, it is advisable to use 802.11 b/g mode for less interference. b. Make sure you entered correct SSID and MAC address of the link partner on the device. It is advisable to use the “Open scan” option. c.
Appendix 5 EMC Statement CE Mark Warning This is a Class B product in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable. Statement This device complies with Part 15 of the FCC Rules.
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.