1N Wireless Broadband Rout er User Guide Wireless- N Broadband Rout er W268R Notice RF Exposure Statement To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
11N Wireless Broadband Rout er User Guide Copyright St at em ent is t he regist ered t radem ark of Shenzhen Tenda Technology Co., Lt d. All t he product s and pr oduct nam es m ent ioned regist ered herein t radem arks are of t heir t he t radem arks respect ive or holders. Copyright of t he whole product as int egrat ion, including it s accessories and soft ware, belongs t o Shenzhen Tenda Technology Co., Lt d. Wit hout t he perm ission of Shenzhen Tenda Technology Co.
11N Wireless Broadband Rout er User Guide Contents CHAPTE R 1 PRODUCT INTRODUCTION .........................................1 1.1 PACK AGE C ONTE NTS.............................................................................2 1.2 LE D INDICATORS AND PORT D E SCRIPTION ......................................2 CHAPTE R 2 PRODUCT INSTALLAT ION............................................5 CHAPTE R 3 HOW TO CONFIGURE TO ACCE SS THE INT E RNE T ...................................................................
11N Wireless Broadband Rout er User Guide 6.1 DHCP SE TTINGS ..................................................................................49 6.2 DHCP C LIE NT L IST .............................................................................50 CHAPTE R 7 V IRT UAL SE RV E R ...........................................................52 7.1 PORT R ANGE F ORWARDING ............................................................... 52 7.2 DMZ SE TTINGS ........................................................
11N Wireless Broadband Rout er User Guide APPE NDIX 2 PRODUCT FE AT URE S .................................................85 APPE NDIX 3 FAQ ....................................................................................86 APPE NDIX 4 CLE AR WIRE LE SS CONFIGURATION ...................90 APPE NDIX 5 RE GULATORY INFORMATION ...............................
11N Wireless Broadband Rout er User Guide Ch a pt e r 1 Pr odu ct I n t r odu ct ion Thank you for purchasing t he Tenda W268R Wireless Broadband Rout er! This easy- t o- use rout er provides sim ple configurat ion int erface which enables you t o configure it wit h ease. I t is based on t he lat est I EEE802.11n st andard, and is backward com pat ible wit h devices of I EEE802.11b/ g st andar ds.
11N Wireless Broadband Rout er User Guide 1 .1 Pa ck a ge Con t e n t s Please verify t he following it em s aft er you open t he package: ¾ One W268R Wireless Broadband Rout er ¾ One Quick I nst allat ion Guide ¾ One Power Adapt er ¾ One Soft ware CD I f any of t he list ed it em s are m issing or dam aged, please cont act t he Tenda reseller for im m ediat e replacem ent . 1 .
11N Wireless Broadband Rout er User Guide LED in dica t or de scr ipt ion on t h e fr on t pa n e l Ba ck pa n e l por t sh ow 3
11N Wireless Broadband Rout er User Guide Ba ck pa n e l por t de scr ipt ion 4
11N Wireless Broadband Rout er User Guide Ch a pt e r 2 Pr odu ct I n st a lla t ion 1. Please use only t he included power adapt er t o power your rout er. ( N OTE: Use of an unm at ched power adapt er could cause dam age t o t his product ) . 2. Please connect t he rout er ’s LAN port t o your com put er wit h an Et hernet cable as shown below.
N Wireless Broadband Rout er User Guide 3. Please connect your broadband line provided by your I SP t o t he rout er ’s WAN port . 4. I nsert t he included soft ware CD int o t he CD drive of your com put er. Aft er t he soft ware aut om at ically init iat es, double click t he “ Se t u p” icon and follow t he inst ruct ions t o com plet e t he inst allat ion. You can also ent er t he rout er ’s Web- based Ut ilit y t o com plet e t he configurat ion.
11N Wireless Broadband Rout er User Guide Ch a pt e r 3 H ow t o con figu r e t o a cce ss the I nternet 3 .1 H ow t o Se t t h e N e t w or k Con figu r a t ion s N e t w or k Con figu r a t ion s u n de r w indow s XP 1. Right click “ M y N e t w or k Pla ce s” on your com put er deskt op and select “ Pr ope r t ie s”. 2. Right click “ Loca l Ar e a Con n e ct ion ” and select “ Pr ope r t ie s”.
11N Wireless Broadband Rout er User Guide 3. Select “ I n t e r n e t Pr ot ocol ( TCP/ I P) ” and click “ Pr ope r t ie s”. 4.
11N Wireless Broadband Rout er User Guide “ Obt a in D N S se r ve r a ddr e ss a u t om a t ica lly”. Click “ OK” t o save t he configurat ions. Or select “ Use t h e follow in g I P a ddr e ss” and ent er t he I P addr ess, Subnet m ask, Default gat eway as follows: ¾ I P Addr e ss: 192.168.0.XXX: ( XXX is a num ber from 2~ 254) ¾ Su bn e t M a sk : 255.255.255.0 ¾ Ga t e w a y: 192.168.0.1 ¾ D N S se r ve r : You should input t he DNS server address provided by your I SP.
11N Wireless Broadband Rout er User Guide N e t w or k Con figu r a t ion s un de r w in dow s 7 1. Click t he net work icon on t he lower right corner of your com put er deskt op, and t hen click” Open Net work and Sharing Cent er ”.
11N Wireless Broadband Rout er User Guide 2. Click “ Change adapt er set t ings” on t he left side of t he window. 3. Right click “ Local Area Connect ion” and select “ Propert ies”.
11N Wireless Broadband Rout er User Guide 4. Double click” I nt ernet Prot ocol Version 4( TCP/ I Pv4) " .
11N Wireless Broadband Rout er User Guide 5. Select “ Obt a in a n I P a ddr e ss a u t om a t ica lly” and “ Obt a in D N S se r ve r a ddr e ss a u t om a t ica lly”. Click “ OK” t o save t he configurat ions.
11N Wireless Broadband Rout er User Guide ¾ I P Addr e ss: 192.168.0.XXX: ( XXX is a num ber from 2~ 254) ¾ Su bn e t M a sk : 255.255.255.0 ¾ Ga t e w a y: 192.168.0.1 ¾ D N S se r ve r : You should input t he DNS server address provided by your I SP. Ot herwise, you can ent er 192.168.0.1. Click “ OK” to save t he configurat ions. 3 .2 Log in t o t h e Rou t e r 1.
11N Wireless Broadband Rout er User Guide 2. Type “ a dm in ” in t he “ Pa ssw or d” field. Click “ OK”. 3. I f you ent er t he correct password, you will com e t o t he rout er ’s web- based ut ilit y as is shown below.
11N Wireless Broadband Rout er User Guide 3 .3 Fa st I n t e r n e t Acce ss Two kinds of fast access m et hods are pr ovided on t he rout er ’s web- based ut ilit y: ADSL dial- up and DHCP. I f you select ADSL dial- up, you only need t o ent er t he access account and access password as well as t he wireless password, and t hen click “ Ok” t o com plet e t he set t ings. I f you select DHCP, you only need t o ent er t he wireless password and click “ Ok” t o com plet e t he set t ings.
11N Wireless Broadband Rout er User Guide The default access m et hod is ADSL dial- up and t he access account and access password are t he sam e as t he ADSL dial- up account and passwor d, which you can inquire your broadband I SP. For ot her access m et hods, please refer t o WAN set t ings in chapt er 4.The wireless password can only consist of 8 charact ers, t he default is 12345678 and you can m odify it when necessary.
11N Wireless Broadband Rout er User Guide 3 .4 Fa st En cr ypt ion The rout er provides t wo encrypt ion set t ing screens, one is sim ple and easy, t he ot her is advanced ( For advanced set t ing, please refer t o chapt er 5.2) . Sim ple a n d e a sy scr e e n: Log on t o t he rout er ’s web- based ut ilit y and you m ay set encrypt ion for t he rout er. The default adopt s WPA- PSK m ode and AES Algorit hm . The default password is 12345678, as shown below.
11N Wireless Broadband Rout er User Guide Ch a pt e r 4 Adva n ce d Se t t in gs 4 .1 Syst e m St a t u s Syst em st at us screen allows you t o view t he rout er ’s WAN port st at us and syst em st at us. Con n e ct ion st a t u s: I t displays t he rout er ’s WAN connect ion st at us. Disconnect ed: I t indicat es t he rout er ’s WAN por t hasn’t been connect ed wit h t he net work cable. Connect ing: I t indicat es t he rout er ’s WAN port is obt aining I P address.
11N Wireless Broadband Rout er User Guide Con n e ct ion t ype : I t displays your current access m et hod. LAN M AC a ddr e ss：I t displays t he Rout er ’s LAN MAC address. W AN M AC a ddr e ss：I t displays t he Rout er ’s WAN MAC Address.
11N Wireless Broadband Rout er User Guide 4 .2 W AN Se t t in gs Vir t u a l D ia l- u p ( PPPoE) ¾ M ode : Show your current connect ion m ode. ¾ Acce ss Accou n t : Ent er t he account provided by your I SP. ¾ Acce ss Pa ssw or d: Ent er t he password provided by your I SP. ¾ M TU: Maxim um Transm ission Unit .
11N Wireless Broadband Rout er User Guide net work. The default value is 1492. Do NOT m odify it unless necessary, but if a specific websit e or web applicat ion soft ware cannot open or be enabled, you can t ry t o change t he MTU value t o 1450, 1400, et c. ¾ Se r vice N a m e : The connect ion nam e for current PPPOE, ent er it if necessary ，ot herwise, leave it blank.
11N Wireless Broadband Rout er User Guide se t t in gs” from “ Syst e m t ools”. St a t ic I P I f your I SP provides you t he st at ic I P, please choose st at ic I P, and you need t o ent er t he I P address, subnet m ask, gat eway, DNS server and alt ernat e DNS server provided by your I SP or net work adm inist rat or。 ¾ M ode : Show your current connect ion m ode. ¾ I P a ddr e ss: Ent er t he WAN I P address provided by your I SP. I f you are not clear, please inquire your local I SP.
11N Wireless Broadband Rout er User Guide ¾ D N S se r ve r : Ent er t he necessary DNS server provided by your I SP. ¾ Alt e r n a t e D N S se r ve r : Ent er t he second DNS address if your I SP provides, which is opt ional. D yn a m ic I P ( Via D H CP) I f your connect ion m ode is Dynam ic I P, it m eans every t im e you access t he I nt er net , you will get a different I P. You don’t need t o ent er any param et ers in t his m ode, j ust Click “ Ok ” t o finish t he set t ings.
11N Wireless Broadband Rout er User Guide ¾ ¾ M ode : Show your current connect ion m ode. PPTP se r ve r a ddr e ss: The I P addr ess or dom ain nam e of t he dest inat ion server and it is used t o specify t he dest inat ion address which needs for PPTP connect ion. ¾ Use r n a m e / Pa ssw or d: Used t o validat e ident it y when connect ing t o t he PPTP server. ¾ Addr e ss m ode : Set t he r out er ’s I P address m ode, you can select eit her “ Dynam ic” or “ St at ic”.
11N Wireless Broadband Rout er User Guide ¾ Su bn e t m a sk : Please ent er t he subnet m ask provided by your I SP ,generally it s 255.255.255.0 ¾ Ga t e w a y: Please ent er t he gat eway provided by your I SP, inquire your local I SP if you are not clear. All t he above param et er s are provided by I SP. L2 TP ¾ ¾ M ode : Show your current connect ion m ode.
11N Wireless Broadband Rout er User Guide when connect ing t o t he L2TP server. ¾ Addr e ss m ode : Set t he r out er ’s I P address m ode, you can select eit her “ Dynam ic” or “ St at ic”. I f your I SP doesn’t provide t he I P address, please select “ Dynam ic”. ¾ I P a ddr e ss: Please ent er t he I P address provided by your I SP, inquire your local I SP if you are not clear. ¾ Su bn e t m a sk : Please ent er t he subnet m ask provided by your I SP ,generally it s 255.255.255.
11N Wireless Broadband Rout er User Guide 4 .3 LAN Se t t in gs Click “Advanced set t ings” –LAN set t ings t o ent er t he following screen. ¾ LAN M AC a ddr e ss: The Rout er ’s LAN MAC address, which is unchangeable. ¾ I P a ddr e ss: The Rout er ’s LAN I P addr ess ( not your PC’s I P address) .The default value is 192.168.0.1; you can change it when necessary. ¾ Su bn e t m a sk : The Rout er ’s LAN subnet m ask. The default value is 255.255.255.
11N Wireless Broadband Rout er User Guide 4 .4 D N S Se t t in gs DNS st ands for Dom ain Nam e Syst em ( or Service) . ¾ D N S se t t in g: Select t o enable t he DNS server. ¾ Pr im a r y D N S a ddr e ss: Ent er t he necessary address provided by your I SP. ¾ Alt e r n a t e D N S a ddr e ss: Ent er t he second DNS address if your I SP provides, which is opt ional. N OTE: Aft er t he set t ings are com plet ed, reboot t he device t o act ivat e t he m odified set t ings.
11N Wireless Broadband Rout er User Guide 4 .5 Ba n dw idt h Cont r ol Bandwidt h cont rol is used t o lim it t he com m unicat ion t raffic of LAN com put ers w hen accessing t he I nt ernet . I t can sim ult aneously cont rol m axim um of 254 PCs' t raffic. In addit ion, IP address range configurat ion is support ed. ¾ En a ble Ba n dw idt h Con t r ol: To enable or disable t he int ernal I P bandwidt h cont rol. The default is disabled.
11N Wireless Broadband Rout er User Guide download. ¾ Ba n dw idt h Ra n ge : The m axim um and m inim um upload/ download dat a t raffic of t he host s in specified I P range. The unit is KByt e/ s. The uplink of upload and download can not exceed t he WAN port bandwidt h lim it at ion range. ¾ Ena ble : To enable t he current edit ed rule. Ot herwise, t he rule will not go int o effect .
11N Wireless Broadband Rout er User Guide 1.Ent er 192.168.0.100 in t he I P addr ess field 2.Select upload in t he Upload/ Download field. 3.Ent er 10- 15 in t he bandwidt h range field 4.Select “ Enable” 5.Click “Add t o list ” 6.Click “ Ok” t o finish t he upload rule set t ings. And t hen add a download rule as shown in t he pict ure below.
11N Wireless Broadband Rout er User Guide The set t ing m et hod is t he sam e as t he above. Ex a m ple 2 Set t he download rat e of all com put ers wit hin t he range of 192.168.0.2- - 192.168.0.254 as 100- 120KByt e/ s, and t he upload rat e as 20- 30KByt e/ s, as shown in t he pict ure below.
11N Wireless Broadband Rout er User Guide The set t ing m et hod is t he sam e as Ex a m ple 1 .
11N Wireless Broadband Rout er User Guide 4 .6 Tr a ffic St a t ist ics Traffic st at ist ics is used t o display t he bandwidt h t hat LAN PC used. En a ble Tr a ffic st a t ist ics: I t is used t o calculat e t he t raffic used by t he LAN com put ers. You can enable it t o calculat e t he t raffic for you. Usually, disable it t o im prove t he rout er ’s dat a packet processing abilit y, and t he default is disabled.
11N Wireless Broadband Rout er User Guide second, t he unit is KByt e/ s. ¾ Se n t m e ssa ge : t he num ber of t he calculat ed com put er ’s dat a packet s t hat are sent out t hrough t he rout er. ¾ Se n t Byt e s: t he volum e of t he calculat ed com put er ’s st at ist ics t hat is sent out t hrough t he rout er ¾ Re ce ive d m e ssa ge : t he num ber of t he calculat ed com put er ’s t he dat a packet s t hat are received t hrough t he rout er.
11N Wireless Broadband Rout er User Guide Ch a pt e r 5 W LAN Se t t in gs 5 .1 W ir e le ss Ba sic Se t t in gs ¾ En a ble w ir e le ss fu n ct ion : Select t o enable t he Rout er ’s wireless feat ures; deselect t o disable it and all funct ions relat ed wit h wireless are disabled.
11N Wireless Broadband Rout er User Guide drop- down list . 1 1 b m ode ：Select it if you have only Wireless- B client s in your net work. 1 1 g m ode ：Select it if you have only Wireless- G client s in your net work. 1 1 b/ g m ix e d m ode : Select it if you have only Wireless- B and Wireless- G client s in your net work. 1 1 b/ g/ n m ix e d m ode : Select it if you have Wireless- B, Wireless- G and Wireless- N client s in your net work.
11N Wireless Broadband Rout er User Guide ¾ APSD Ca pa ble : I t is used for aut o power- saved service. The default is disabled. ¾ Ch a n n e l channel ba n dw idt h : bandwidt h to Select an enhance appropriat e t he wireless perform ance. Select 20/ 40M when t he net work has 11b/ g and 11n wireless client s. Select 20M when t he net work has only non- 11n wireless client s. Select 20/ 40M t o prom ot e it s t hroughput when t he wireless net work is in 11n m ode.
11N Wireless Broadband Rout er User Guide ¾ AP M AC a ddr e ss: I nput t he MAC address of anot her ( opposing) wireless rout er you want t o connect . Ex a m ple : This exam ple is t o bridge t wo 316R rout ers. 1. I f you know t he connect ing rout er ’s MAC address, please ent er it int o t he AP MAC address field and click “ Ok”.
11N Wireless Broadband Rout er User Guide 2. You can also search for t he wireless rout er ’s signal by scanning. a) Click “ Open scan” and click t he scanned signal and click t he ” Ok” but t on on t he dialog box and t he corresponding wireless MAC address will be added t o t he AP MAC address field aut om at ically.
11N Wireless Broadband Rout er User Guide b) Click “ Ok” aft er t he MAC address is added.
11N Wireless Broadband Rout er User Guide Aft er finishing t he above st eps, you need t o set t he ot her W268R rout er in t he sam e way. N OTE: WDS feat ure requires bot h rout ers support t his funct ion and t he SSI D, channel, encrypt ion m et hod and passwor d are t he sam e as t hose of t he connect ing rout er. 5 .
11N Wireless Broadband Rout er User Guide int ercept ing or int ruding your wireless net work. 5 .2 .1 W PS Se t t in gs WPS ( Wi- Fi Prot ect ed Set t ing) m akes it quick and easy t o est ablish a secure connect ion bet ween t he wireless client s and t he rout er. The users only need t o ent er a PI N code or press WPS but t on on t he back panel t o configure it w it hout m anually select ing an encrypt ion m et hod or set a key. ¾ W PS se t t in gs: To enable or disable WPS funct ion.
11N Wireless Broadband Rout er User Guide ¾ W PS m ode : Provide t wo ways: PBC ( Push- But t on Configurat ion) and PI N code. ¾ PBC: Select t he PBC and click Ok , or press and hold t he WPS but t on on t he back panel of t he device for about one second. The WPS LED indicat or will be flashing for 2 m inut es, which m eans t he WPS is enabled. During t his t im e ( flashing WPS LED) , you can enable t he w ireless client t o im plem ent t he WPS/ PBC negot iat ion bet ween t hem .
11N Wireless Broadband Rout er User Guide ¾ W PA Algor it hm s: Provides TKI P [ Tem poral Key I nt egrit y Prot ocol] or AES [ Advanced Encrypt ion St andard] . ¾ Ke y: Ent er t he pass phrase t hat consist s of 8- 63 ASCI I charact ers. ¾ Ke y Re n e w a l I n t e r va l : Set t he key’s renewal period, w hich t ells t he device how oft en it should change t he dynam ic keys.
11N Wireless Broadband Rout er User Guide 5 .2 .3 W PA2 - PSK WPA2 ( Wi- Fi Prot ect ed Access version 2) provides higher securit y t han and WPA ( Wi- Fi Prot ect ed Access) . ¾ W PA Algor it hm s: Provides TKI P [ Tem poral Key I nt egrit y Prot ocol] or AES [ Advanced Encrypt ion St andard] . ¾ Ke y: Ent er t he pass phrase t hat consist s of 8- 63 ASCI I charact ers.
11N Wireless Broadband Rout er User Guide 5 .3 W ir e le ss Acce ss Con t r ol Wireless access cont rol is act ually based on t he MAC address t o perm it or forbid specific client s t o access t he wireless net work. ¾ M AC a ddr e ss filt e r : “ Pe r m it ” indicat es t o allow t he client s in t he list t o access t he wireless net work, “ For bid” indicat es t o prevent t he client s in t he list from accessing t he wireless net work.
11N Wireless Broadband Rout er User Guide 5 .4 Con n e ct ion St a t u s This screen shows wireless client ’s connect ion st at us, including MAC address, Channel bandwidt h. ¾ M AC a ddr e ss: Shows t he MAC addresses of t he host s connect ed t o t he Rout er. ¾ Ba n dw idt h : Shows t he channel bandwidt h of t he current connect ed host s ( wireless client s) . Ch a pt e r 6 D H CP Se r ve r 6 .
11N Wireless Broadband Rout er User Guide prem ise of act ivat ing “ Obt ain an IP Address Aut om at ically”. So specifying t he st art and end addr ess of t he I P Address pool is needed. ¾ D H CP se r ve r : Check t he Ena ble box t o enable ¾ I P pool st a r t / e n d a ddr e ss: Ent er t he range of I P DHCP server. addresses for DHCP server dist ribut ion.
11N Wireless Broadband Rout er User Guide are assigned by t he DHCP server. You can m anually ent er t he I P and MAC addr ess and convert t hem t o st at ic assignm ent . ¾ H ost n a m e : I t displays t he nam e of t he com put er whose I P is allocat ed by t he DHCP server. ¾ I P a ddr e ss: Ent er t he I P address w hich needs st at ic binding. ¾ M AC a ddr e ss: Ent er t he MAC address of t he com put er you want t o bind. Click “ Add” t o add t he ent ry in t he list .
11N Wireless Broadband Rout er User Guide Ch a pt e r 7 Vir t u a l Se r ve r 7 .1 Por t Ra n ge For w a r din g ¾ St a r t / En d por t : Ent er t he st art / end port num ber which ranges t he Ext ernal port s used t o set t he server or I nt ernet applicat ions. ¾ LAN I P: Ent er t he I P address of t he PC which you want t o set as t he server. ¾ Pr ot ocol: Select t he prot ocol ( TCP/ UDP/ Bot h) for t he applicat ion.
11N Wireless Broadband Rout er User Guide prot ocol you are using, you can select “ Bot h”. ¾ Ena ble : Click t he Ena ble checkbox t o bring t he set rule int o effect . ¾ D e le t e : Clear all set t ings of t his it em . ¾ W e ll- k n ow n se r vice por t : The well- known prot ocol port s are list ed in t he drop- down list . Select one and select a sequence num ber in t he I D drop- down list and t hen click “Add”, t his port will be added aut om at ically t o t he I D list .
11N Wireless Broadband Rout er User Guide and it s port 21 will be added t o t he corresponding field aut om at ically. 2. Ent er 192.168.0.10 in t he LAN I P colum n, and t hen select “ Bot h” as t he prot ocol and select “ Enable”. 3. As t he pict ure shown below. 4. Click t he “ Ok” but t on t o save t he set t ings. And now, when your friends want t o visit t he FTP ser ver, t hey only need t o ent er ft p: / / xxx.xxx.xxx.xxx: 21 in t he address field. Here, xxx.xxx.xxx.
11N Wireless Broadband Rout er User Guide ft p: / / 172.16.102.89: 21 in t he address field. N OTE: I f you set t he service port of t he virt ual server as 80, you m ust set t he Web m anagem ent port on Rem ot e Web Managem ent screen t o be any value except 80 such as 8080. Ot herwise, t here will be a conflict t o disable t he virt ual server.
11N Wireless Broadband Rout er User Guide 7 .2 D M Z Se t t in gs The DMZ Set t ings screen allows one local com put er t o be exposed t o t he I nt ernet for use of a special- purpose service such as I nt ernet gam ing or videoconferencing. DMZ host ing forwards all t he port s at t he sam e t im e t o one PC. ¾ D M Z H ost I P Addr e ss: The I P addr ess of t he LAN com put er you want t o set as DMZ host . ¾ Ena ble : Check t o enable t he DMZ host .
11N Wireless Broadband Rout er User Guide 7 .3 UPN P Se t t in gs UPnP ( Universal Plug and Play) .Wit h t he UPnP funct ion, t he int ernal host can request t he rout er t o process som e special port swit ching so as t o enable t he ext ernal host t o visit t he resources of t he int ernal host . ¾ En a ble UPn P: Click t he checkbox t o enable t he UPnP. N OTE: This funct ion goes int o effect under Windows XP or Windows ME ( N OTE: t he syst em should int egrat e or have inst alled t he Direct x 9.
11N Wireless Broadband Rout er User Guide Ch a pt e r 8 Se cu r it y Se t t in gs 8 .1 Clie n t Filt e r Se t t in gs You can enable client filt er t o cont rol LAN com put ers’ access t o som e port s of t he I nt ernet 。 ¾ Filt e r M ode : You can select eit her “ Perm it only” or “ Forbid only”. ¾ Acce ss Policy: Select one num ber from t he drop- down list . ¾ Re m a r k : A sim ple descript ion of t he configured file. You can also leave it blank.
11N Wireless Broadband Rout er User Guide ¾ Por t : Ent er t he cont rolled TCP/ UDP prot ocol port . You can specify a port or port range. ¾ Type : Select one prot ocol ( TCP/ UDP/ Bot h) from t he drop- down list . ¾ Tim e : Select t he t im e range of client filt er. ¾ D a t e : Select t he day( s) t o run t he access policy. ¾ Ena ble : To ( forbid/ perm it enable/ disable t he access t he packet s m at ched policy wit h t he access policy t o pass t hrough t he rout er.
11N Wireless Broadband Rout er User Guide 18: 00 from Sunday t o Sat urday. 8 .2 M AC Addr e ss Filt e r You can lim it t he com put er ’s access t o I nt ernet by MAC Address Filt er.
11N Wireless Broadband Rout er User Guide ¾ Filt e r m ode : You can select eit her “ Perm it only” or “ Forbid only”. ¾ Acce ss Policy: Select one num ber from t he drop- down list . ¾ Re m a r k : A sim ple descript ion of t he configured file. You can also leave it blank. ¾ M AC Addr e ss: Ent er t he MAC address you want t o run t he access policy. ¾ Tim e : Select t he t im e range of MAC address filt er. ¾ D a t e : Select t he day( s) t o run t he access policy.
11N Wireless Broadband Rout er User Guide of 00: E0: 4C: 69: A3: 23 t o access I nt ernet during 8: 00 t o 18: 00 from Monday t o Friday. Ex a m ple 2 Perm it t he com put er wit h t he MAC addr ess of 00 ：E4 ：A5 ：44 ：35 ：69 t o access I nt ernet from Monday t o Friday.
11N Wireless Broadband Rout er User Guide 8 .3 URL Filt e r Se t t in gs You can use URL filt ering t o forbid t heir access t o cert ain websit es at a specified t im e. ¾ Filt e r M ode : You can select eit her “ Perm it only” or ¾ Acce ss Policy: Select one num ber from t he “ Forbid only”. drop- down list . ¾ Re m a r k : A sim ple descript ion of t he configured file. ¾ St a r t / En d I P: Ent er t he st art / end I P address. ¾ URL ch a r a ct e r st r in g: You can also leave it blank.
11N Wireless Broadband Rout er User Guide ¾ Tim e : Select t he t im e range of URL filt er. ¾ D a t e : Select t he day( s) t o run t he access policy. ¾ Ena ble : To enable/ disable t he access policy ( forbid / perm it t he packet s m at ched wit h t he access policy t o pass t hrough t he rout er ) . Ex a m ple 1 Forbid all com put ers on LAN t o access baidu.com during 8: 00 t o 18: 00 from Monday t o Friday. Ex a m ple 2 Perm it LAN com put ers wit h t he I P addresses of 192.168.0.
11N Wireless Broadband Rout er User Guide N OTE: Ent er only one dom ain nam e for each access policy for one access policy can only filt er one dom ain nam e. So, if you want t o filt er m ult iple dom ain nam es, you need t o set m ult iple access policies 8 .4 Re m ot e W e b M a n a ge m e n t This sect ion inst ruct s how t o allow t he net work adm inist rat or t o m anage t he Rout er r em ot ely.
11N Wireless Broadband Rout er User Guide ¾ Ena ble : Check to enable rem ot e web m anagem ent . ¾ Por t : The m anagem ent port open t o out side ¾ I P Addr e ss: Specify t he range of t he I P addresses access. The default value is 80. of t he com put ers on t he I nt ernet for rem ot e m anagem ent . N OTE: 1. I f you want t o log in t he device’s Web- based Ut ilit y via port 8080, you need t o use t he form at of WAN I P address: port ( for http ： exam ple //220.135.211.
11N Wireless Broadband Rout er User Guide Rout er t o im plem ent rem ot e web m anagem ent . For e x a m ple : I f you want t o configure t he com put er at t he I P address of 218.88.93.33 t o access t he rout er ’s w eb- based ut ilit y via port 8080, please set t he param et er s as above.
11N Wireless Broadband Rout er User Guide Ch a pt e r 9 Rou t in g Se t t in gs 9 .1 Rou t in g Ta ble This page shows t he rout er ’s core rout ing t able. The m ain dut y for a rout er is t o look for a best pat h for every dat a packet , and t ransfer t his dat a packet t o a dest inat ion st at ion. I n order t o fulfill t his funct ion, m any t ransferring pat hs, i.e. rout ing t able, are saved in t he rout er, for choosing when needed. 9 .
11N Wireless Broadband Rout er User Guide D e st in a t ion n e t w or k I P a ddr e ss: The dest inat ion host or I P segm ent you visit . Su bn e t m a sk : Ent er t he subnet m ask , generally it is 255.255.255.0 Ga t e w a y: The ent ry I P address of t he next rout er. NOTE: 1. The gat eway m ust be at t he sam e net segm ent wit h t he rout er ’s LAN I P. 2. I f t he dest inat ion I P address is one host ’ addr ess, t hen t he subnet m ask m ust be 255.255.255.255. 3.
11N Wireless Broadband Rout er User Guide Ch a pt e r 1 0 Syst e m Tools 1 0 .1 Tim e Se t t in gs This sect ion is t o configure t he rout er ’s syst em t im e. You can set it m anually or obt ain t he GMT t im e from t he I nt ernet . ¾ Tim e zon e : Select t he t im e zone where you are operat ing t he Rout er from t he drop- down list . ¾ Cu st om ize d t im e : Ent er t he t im e you wish t o configure. N OTE: When t he Rout er is powered off, t he t im e set t ings will be lost .
11N Wireless Broadband Rout er User Guide I nt ernet . Only when you connect t o t he I nt ernet and obt ain t he GMT t im e or set t he t im e on t his screen, can t he t im e set t ings in ot her funct ions ( e.g. securit y set t ings) t ake effect . 1 0 .2 D D N S The DDNS ( Dynam ic Dom ain Nam e Syst em ) is support ed in t his Rout er. I t is used t o assign a fixed host and dom ain nam e t o a dynam ic I nt ernet I P addr ess.
11N Wireless Broadband Rout er User Guide ¾ M a in fe a t u r e s: 1. Most ly, your I SP provides a dynam ic I P addr ess and t he DDNS is used t o capt ure t he changeable I P address and m at ch t o t he fixed dom ain. Then users can have access t o t he I nt ernet t o com m unicat e wit h ot hers out side t he net work. 2. DDNS can help you t o est ablish a virt ual host in your hom e or com pany. ¾ D D N S: Click t he radio but t on t o enable or disable t he DDNS service.
11N Wireless Broadband Rout er User Guide account inform at ion in DDNS server, you can t hen access t he web page by ent ering ht t p: / / t enda.3322.org in t he address field. 1 0 .3 Ba ck u p/ Re st or e On t his screen, you can back up t he rout er ’s curr ent set t ings or rest ore previous set t ings. ¾ Ba ck u p Se t t in g: Click t he Ba ck u p but t on t o back up t he Rout er ’s set t ings and select a pat h t o save t hem .
11N Wireless Broadband Rout er User Guide Click t he “ Sa ve ” but t on t o save t he configurat ion files.
11N Wireless Broadband Rout er User Guide ¾ Re st or e Se t t in g: Click t he “ Br ow se ” but t on t o select t he backup files. Click t he “ Re st or e ” but t on t o rest ore previous set t ings.
11N Wireless Broadband Rout er User Guide 76
11N Wireless Broadband Rout er User Guide 1 0 .4 Re st or e t o Fa ct or y D e fa u lt This screen allows you t o rest ore all set t ings t o t he fact ory default values. ¾ Re st or e : Click t his but t on t o rest ore t o default set t ings. ¾ Fa ct or y de fa u lt se t t in gs: Pa ssw or d: adm in I P a ddr e ss: 192.168.0.1 Su bn e t m a sk : 255.255.255.0 N OTE: Aft er rest oring t o default set t ings, please rest ar t t he rout er t o m ake t he default set t ings effect ive. 1 0 .
11N Wireless Broadband Rout er User Guide upgrade file from our websit e, www.t enda.cn. ¾ Br ow se : Click t his but t on t o select t he upgrade ¾ Upgr a de : Click t his but t on t o st art t he upgrading file. process. Aft er t he upgrade is com plet ed, t he rout er will reboot aut om at ically. 1 0 .6 Re boot t h e Rou t e r Reboot t he rout er t o m ake t he configurat ion effect ive. The rout er will cut it s WAN connect ion aut om at ically aft er reboot ing.
11N Wireless Broadband Rout er User Guide Re boot t h e r ou t e r : Click t his but t on t o reboot t he rout er. 1 0 .7 Pa ssw or d Ch a n ge This sect ion is t o set a new password t o bet t er secure your rout er and net work. ¾ Old pa ssw or d: Ent er t he old password. ¾ N e w pa ssw or d: Ent er a new password.
11N Wireless Broadband Rout er User Guide ¾ Con fir m n e w pa ssw or d: Re- ent er t o confirm t he new password. N OTE: To secure t he rout er and your net work, it is highly recom m ended t hat you password.
11N Wireless Broadband Rout er User Guide 1 0 .8 Syslog The sect ion is t o view t he syst em log. You can view various condit ions appearing aft er syst em st art , and also check whet her t here’s an at t ack on t he net work. The log can record at m ost 150 ent ries. ¾ Re fr e sh : Click t his but t on t o updat e t he log. ¾ Cle a r : Click t his but t on t o clear t he current shown log.
11N Wireless Broadband Rout er User Guide 1 0 .9 Log ou t Aft er all set t ings are finished, please click’” Log out ” t o exit securely and com plet ely.
11N Wireless Broadband Rout er User Guide Appe n dix 1 Glossa r y Ch a n n e l: An inst ance of m edium use for t he purpose of passing prot ocol dat a unit s ( PDUs) t hat m ay be used sim ult aneously, in t he sam e volum e of space, wit h ot her inst ances of m edium use( on ot her channels) by ot her inst ances of t he sam e physical layer ( PHY) ,wit h an accept ably low fram e error rat io( FER) due t o m ut ual int erference.
11N Wireless Broadband Rout er User Guide t he net work.WPA2 is t he second generat ion of WPA securit y and provides a st r onger encry pt ion m echanism t hrough Advanced Encrypt ion St andard ( AES) , which is a requirem ent for som e governm ent users. 8 0 2 ,1 x a u t h e n t ica t ion St at ic WEP key is difficult t o m anage for when you change t he key, you will have t o inform all ot hers, and if t he key is disclosed in one of t he places, t he key can no longer provide securit y.
11N Wireless Broadband Rout er User Guide Appe n dix 2 Pr odu ct Fe a t u r e s z Support s I EEE 802.11n, I EEE 802.11g, I EEE 802.11b, I EEE 802.3 and I EEE 802.3u st andards. z 5dBi high gain om ni- direct ional ant enna, wit h st rong signals and long t ransm ission dist ance.
11N Wireless Broadband Rout er User Guide z Support s WDS t o ext end wireless net work z Support s virt ual server, DMZ host z Provides syslog t o record t he running st at us of t he rout er Appe n dix 3 FAQ This sect ion provides som e solut ions t o t he problem s which m ay occur during t he rout er ’s inst allat ion or usage. The inst ruct ions below m ay help you deal wit h t he problem s. I f your problem is not in t he list , please log int o our websit e www.t enda.
11N Wireless Broadband Rout er User Guide t he Rout er ’s LAN I P address 192.168.0.1 ( open “ Com m and Prom pt ” and t ype “ Ping 192.168.0.1” and t hen ent er) . I f it is OK, please m ake sure your browser does not access t he I nt ernet by proxy server. I f t he ping fails, you can press t he “ RESET” but t on for 7 seconds t o rest ore t o default set t ings. And t hen repeat t he ping operat ion. I f it st ill does not work, please cont act us. 2 .
11N Wireless Broadband Rout er User Guide 1450 or 1400. 5 .H ow t o sh a r e m y com pu t e r ’s r e sou r ce w it h ot h e r u se r s in I n t e r n e t ？ I f you want I nt ernet users t o access t he int ernal server via t he rout er such as: e- m ail server, Web, FTP. You can configure t he “ Vir t u a l Se r ve r ”. St e p 1 : creat e your int ernal server, m ake sure t he LAN users can access t hese ser vers and know relat ed ser vice port .
11N Wireless Broadband Rout er User Guide WEB Server TCP 80 FTP Server TCP 21 Telnet TCP 23 Net Meet ing TCP 1503、1720 File MSN Messenger TCP/ UDP Send: 6891- 6900( TCP) Voice: 1863、6901( TCP) Voice: 1863、5190( UDP) PPTP VPN TCP 1723 I phone5.
11N Wireless Broadband Rout er User Guide Appe n dix 4 Cle a r W ir e le ss Configur a t ion Cle a r W ir e le ss con figu r a t ion file u n de r w in dow s XP 1. Right click “ M y N e t w or k Pla ce s” on your com put er deskt op and select “ Pr ope r t ie s”. 2. Right click “ Wireless Net work Connect ions” and select “ Propert ies”.
11N Wireless Broadband Rout er User Guide 3. Click “ Wireless Net work Configurat ion” and clear t he corresponding wireless configurat ion file as shown below. Cle a r W ir e le ss con figu r a t ion file u n de r w in dow s 7 1. Right click “ Net work” and click “ Propert ies”.
11N Wireless Broadband Rout er User Guide 2. Click “ Manage wireless net works” on t he left side of t he window. 3. Delet e t he corresponding configured file in t he “ Manage wireless net works”.
11N Wireless Broadband Rout er User Guide 93
11N Wireless Broadband Rout er User Guide Appe n dix 5 Re gu la t or y I n for m a t ion EU D e cla r a t ion or D e cla r a t ion of Con for m it y Hereby, SHENZHEN TENDA TECHNOLOGY CO.,LTD, declares t hat t his Wireless Broadband Rout er is in com pliance w it h t he essent ial requirem ent s and ot her relevant provisions of Direct ive 1999/ 5/ EC.
11N Wireless Broadband Rout er User Guide - Connect t he equipm ent int o an out let on a circuit different from t hat t o which t he receiver is connect ed. - Consult t he dealer or an experienced radio/ TV t echnician for help. To assure cont inued com pliance, any changes or m odificat ions not expressly approved by t he part y responsible for com pliance could void t he user ’s aut horit y t o operat e t his equipm ent .
