Bluetooth Speaker Model: 56802BT INSTRUCTION MANUAL PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE Getting Started • • • Remove the speaker from the box. Remove any packaging from the product. Please retain all packaging until you have checked and counted all the parts and the contents against the parts list.
Package Contents • • • Bluetooth Micro Cube Speaker with lanyard USB rechargeable cable Instruction Manual Key Features • • • • • Wireless Connectivity using Bluetooth®2.1+EDR Technology Use as Hands‐Free speaker phone, with a built‐in microphone Compatible with all Bluetooth enabled devices such as Smart Phones, Tablets, etc.
Description of Parts INSTRUCTIONS FOR USE Charging the speaker The speaker has built‐in rechargeable battery. When the battery is drained out, device would turn OFF automatically. Please recharge the battery every time it drains out. Plug the Micro USB end of the included USB rechargeable cable into the charging port. Plug the other end into a USB port on your computer or other devices made for USB charging. Red charging LED Light illuminates indicating that the device is being charged.
Turning ON/OFF the Speaker – Before Turning ON the device, please ensure that the unit is fully charged. Press and hold the middle button for few seconds to turn ON/OFF the device. Connect using Bluetooth Technology (manually) Turn On the Speaker. You would hear a start‐up tone, and Blue operation LED light would flash rapidly, indicating that you are now in Bluetooth Pairing Mode. Activate the Bluetooth function on your source device (Mobile Phone or Tablet).
Changing from Wireless Music to Wireless Shutter Remote or vice versa 1. Please ensure that your device (iPhone, Tablet or Other Smart Phone) is paired with the Bluetooth Speaker to play music wirelessly. Short press the middle button twice and then wait for a few seconds for changing to Wireless Shutter Remote. Adjust your device to camera mode and then press the middle button once each time to take a photo. 2. Short press the middle button twice for changing back to Wireless Music mode.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement.
NOTE: Manufacturer cannot assume responsibility for loss or damage during incoming shipment. As a precautionary measure, carefully package the product for shipment, and insure it with the carrier. Be sure to enclose the following details with the product: your full name, return address and daytime phone number, a note describing the problem you experienced, a copy of your sales receipt or other proof of purchase to determine warranty status. C.O.D. shipments cannot be accepted.