Operating Instructions

ShenZhen Targetever Technology Co., Ltd.

1.Model Name :DG078

2.Product Diagram

3.Product overview

1. The handle is a Bluetooth wireless handle;The handle is mainly used with the

SWITCH host. Channel lights are allocated to the handle through the host. The handle

supports motor vibration and sensor, and the host can be woken up when the host is

asleep

2, the handle by 19 digital buttons (UP, DOWN, LEFT, RIGHT, A (х), B (О), X (-), Y (Δ),

L1,R1,L2, R2, L3, R3, -, +, HOME, VIB,TURBO, code key);Two analog 3D joystick

components

4.Operating Instructions

1、Schema and connection descriptions

Switch wired mode

Put the Switch back on the base and connect the USB interface of the base directly with the attached

TYPE-C data line. The connection can be completed without any other operation

The corresponding channel indicator LED is always on (Switch host allocation).This mode supports

voice capabilities

Switch bluetooth mode

Bluetooth mode: Press and hold the front matching code button for about 3 seconds until the

matching light below keeps scrolling. Then, find the interface of gamepad Settings on the Settings page

of the Switch host for matching. After the matching, it can be used

The PC model

The Pro handle cannot be connected to the PC via USB cable. It can only be connected via

Bluetooth. If your computer does not have Bluetooth function, you need to buy another Bluetooth adapter,

which is generally available in mainstream laptops.

Pro Controller Connect to PC: As in the previous steps, press and hold the Bluetooth code button,

wait for the pairing light to turn on, then select the pairing Pro Controller on the PC side

PAGE 1
ShenZhen Targetever Technology Co., Ltd. 1.Model Name :DG078 2.Product Diagram 3.Product overview 1. The handle is a Bluetooth wireless handle;The handle is mainly used with the SWITCH host. Channel lights are allocated to the handle through the host.
PAGE 2
Android mode: The Pro gamepad connects to the phone in basically the same way. Bluetooth search is enabled on the phone, and Bluetooth pairing is enabled on the gamepad. After selecting the corresponding Pro gamepad device on the phone, it can be used after successful connection. 2、Back to the model Press the HOME button to wake up the handle for 1 second. When it is awakened, it will automatically connect back to the paired host. If it fails to connect back for 10 seconds, it will automatically sleep.
PAGE 3
FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.