Intertwine Testing Services -Melon Park Sen Zen Kaifeng Electronic Co., Lid., 900 MHz Cordless Telephone Date of Test: May 6, 1998 FCC ID: NR839525 9.0 Instruction Manual Attached is a preliminary copy of the Instruction Manual. This manual will be provided with each unit sold/leased in the United States. Report # J98014451B 21 FCC Part 15.
ANALOG 900MHz CORDLESS TELEPHONE SYSTEM. A. SECURITY CODE SETTING DURING THE CHARGE. 1. Blinking The IN-USE and CHARGE LED after automatically a special security code (65,536) is sating. B. TELEPHONE OPERATION 1. TO PLACE A CALL 1} Press talk button. 2) In use LED turn on after HANDSET is talk on. 3) BASE in-use LED is blinking. 4) Wait for a dial tone, then dial the number. 2. TO RECEIVE A CALL 1) Auto talk if the HANDSET is on the BASE. 2) Press talk key if the HANDSET is out of the cradle.
2)Calling the HANDSET form the BASE UNIT. a. Press the PAGE/INT button on the BASE UNIT. The HANDSET will ring. b. Then press the INT button on the HANDSET. ยข. Begin conversation. d. To end conversation, press the INT button on the HANDSET once,or press the PAGE/INT button on the BASE UNIT. 7. CHANNEL SELECTION 1) 40 channel Auto scan. 8. MIXED MODE DIALING. -Press the bunion to switch from pulse to tone dialing temporarily. 9. MEMORY DIALING -10 telephone number.
14. SPEAKER PHONE a. Press the speaker phone button. . The IN-USE LED indicator will light up. Listen for a dial tone. . Dial the phone number, When finished will your call, press the speaker phone button again. The IN-USE LED indicator will turn off. C. MAINTENANCE. -Repeated use/recharge of Ni-CD batteries without periodic full is change results in reduced usable time. When you notice the usable charge duration decreasing, fully discharge the Ni-CD battery and recharge as described below. 1. DISCHARGING.
as call waiting, conference calling and others. Also allows you to regain dial tone without returning HANDSET to the BASE. 4. Hearing aid compatible 3. Memory dialing. Ten telephone numbers into memory {up to 16 digits each) and you can then dial any of the stored phone numbers by pressing memory and one of the keypad buttons. (0-9) 6. Mixed dialing(temporary tone dialing) 7. Out of range alarm. When the HANDSET is out of the range of the BASE unit, it will generate an alarm tone. 8. Paging call. 9.