User's Manual

How to Use
Attach the antenna
Screw the package included antenna on to
the rear of the BE-RCA antenna terminal by
firmly turning it to the right. Set up the
antenna and set it to the desired position.
Note: Different antenna positions can affect
wireless working range. Check which position
gives you the best result.
Power on & Set up
Step 1. Connect the BE-RCA to a power
source (or compatible USB charger with
5V/500mA-2A output) via the supplied
micro USB cable. This BE-RCA does not
have built-in battery.
Step 2. Connect the BE-RCA to an audio
input on your home music system.
A.RCA-style Right/Left connections(a RCA
to RCA cable is included)
B.Direct connect from 3.5mm to an auxil-
iary input ( 3.5mm Audio cable is included)
Please consult your home music system’s
manual for more information on which
connections make sense with your system.
Turning the BE-RCA Receiver On/Off
Thank you for purchasing the BESIGN
BE-RCA Wireless Music Receiver. Please
read this user manual carefully and keep it
in a safe place for future reference. If you
need any assistance, please contact our
support team with your product model
number and Amazon order number.
Package Contents
● BESIGN BE-RCA Wireless Music Receiver
● AC adapter
● Antenna terminal
● Micro USB Power Cable
● 3.5mm Audio Cable
● RCA Cable
● User Manual
For questions, assistance, support, or
warranty claims please contact us with
E-mail address as follows:
[e-mail]
www.besign-tech.com
Warranty & Customer Support
BE-RCA Wireless Music Receiver
User Manual
Turn on
Turn off
- 01 - - 02 - - 03 - - 04 - - 05 - - 06 - - 07 - - 08 -
Press and hold the multi-func-
tion button for 3 seconds, the
Blue LED indicator will stay on
for 1 seconds.
Press and hold the multi-func-
tion button for 2 seconds, the
Red LED indicator will stay on
for 1 seconds.
Note:
• The adapter can remember previously
paired devices and will attempt to pair
with devices automatically, without going
into pairing mode.
• The BE-RCA adapter will be automatical-
ly out of pairing mode in 15 minutes.
Pair with the second device
1.Follow the previous instructions in the
“Pairing” section to pair the BE-RCA with
EN EN EN EN EN EN
RCA Cable
AUX Cable
BE-RCA Back
Speaker
RCA Audio out
Pairing
Step 1 Plug
Step 3 Play
Note:No battery inside,please connect
the power supply before use.
Product Diagram
1. Multi-function Button
2. LED Indicator
3. 3.5mm Audio Port
4. RCA Port
5. Micro USB Power Port
LED Indicator
Flashing Red and Blue
Solid Blue
Status
Pairing mode
Audio Out
3.5mm Aux
Audio Out
Power
L R
1.
2.
3.4. 5.
Connected
1.When Powered off,press and hold the
multifunction button for 5 seconds until
the blue and red led light flashing
alternately.
2.Open your smart phone bluetooth
setting, search”BE-RCA” and connect.
3.The BE-RCA led turn solild blue after
the bluetooth connection is completed.
Step 1
Step 3
Step 2
Step 2 Pair
Note: the BE-RCA adapter will enter
standby mode if no connection within 15
minutes,you need press and hold the
Multi-function Button 2 seconds to make it
turn off or disconnect the power source.
EN EN