Bluetooth to 0-10V Converter With Relay Product Datasheet Please read all instructions before installation
www.sunricher.
www.sunricher.com Features • Bluetooth to 0-10V signal converter,Bluetooth® mesh network • Built-in 20mA 0-10V signal output,with 20A relay • Mesh network , which has a much longer control distance, transmits received signals to neighboring devices • All devices on 0-10V line are broadcast controlled by Silvair Commissioning tools • Supporting Sunricher kinetic energy switches and EnOcean switches EWSSB and EWSDB • In typical outdoor environment, the range for wireless communication is about 65meters .
www.sunricher.com Warning • DO NOT install with power applied to device • DO NOT expose the device to moisture • Operating control; Type 1.B; Pullution degree: II; Rated impulse voltage: 4000V; Overcurrent protective device: 25A; “When being connected to 277Vac, the control should be connected to three-phase three-wire unearthed systems, and the rated impulse voltage is 4000V.
www.sunricher.
www.sunricher.com Statement FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.