User's Manual

ManualsBrandsShenzhen Sunricher Technology ManualsElectronicsRF sender

Table Of Contents

RF Single color controller

Feature

SR-2836DIM & SR-2836DDIM

Parameter

Installation

Remote

Part No.

Operation Voltage

Operation

Frequency

SR-2836DIM 3VDC

916.63MHz

Remarks

RF Wireless

Wiring diagram

SR-2836DIM & SR-2836DDIM are RF controllers for single color lighting. Each white can achieve 256 levels

brightness adjustment. Key part can be uninstall every easily to change battery and frames from other factory.

Receivers work with WIFI-RF convertor to be controlled by smart phone

Part No.

Input Voltage

Remarks

Output Current

SR-1009FA 12-36VDC

Constant voltage

4x(60-180)W

4x5A

Output Power

SR-1009EA 12-36VDC

Constant voltage

4x(96-288)W4x8A

Receiver

SR-1009FA3 12-36VDC

Constant current

4x(4.2-12.6)W

4x350mA

SR-1009FA7 12-36VDC

Constant current

4x(8.4-25.2)W4x700mA

1)Receiver Connection Diagram for Single Unit

2) Connection Diagram for Multiple UnitsReceiver

Power Supply

12-36VDC

110V-230VAC

whi te

SR-1009FA

LED CONTROLLER

1234

Lea rning K ey

Sing le Colo r LED Strip

whi te

SR-1009FA

LED CONTROLLER

1234

Lea rning K ey

whi te

SR-1009FA

LED CONTROLLER

1234

Lea rning K ey

Power Supply

12-36VDC

110V-230VAC

whi te

SR-1009FA

LED CONTROLLER

1234

Lea rning K ey

Singl e Co lorLE D St rip

4x5A

Power Supply

12-36VDC

110V-230VAC

whi te

SR-1009FA

LED CONTROLLER

1234

Lea rning K ey

4x10A

Singl e Co lorLE D St rip

Sing le Colo r LED Strip

SR-2836DIM

SR-2836DDIM

SR-2836DIM

r su

SR-2836DDIM

r s

Operation

a.Learning

Press shortly the learning Key on the receiver, then push the rotary button .Once successfully learn, the LED

lights will blink on the receiver. Do the same for the other receivers if you use them, you can add as many

optional receivers as you want

b.Operation

-Short push rotary button to switch ON/OFF

-Adjust dim brightness by the rotary button from left to right 1-100%

-Adjust dim brightness by the rotary button from right to left 100-1%

Safety & Warnings

1) The product shall be installed and serviced by a qualified person.

2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof

enclosure.

3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.

Summary of content (3 pages)

PAGE 1
RF Single color controller Wiring diagram SR-2836DIM & SR-2836DDIM 1)Receiver Connection Diagram for Single Unit N N Power Supply 12-36VDC 110V-230VAC 110V-230VAC 3 white 4 white LED CONTROLLER 4 Learning Key 3 LED CONTROLLER 2 SR-1009FA 2 SR-1009FA Learning Key 1 1 L L Power Supply 12-36VDC Single ColorLED Strip Single ColorLED Strip Single ColorLED Strip Single ColorLED Strip 4x10A Single ColorLED Strip SR-2836DIM SR-2836DDIM 4x5A 2)Receiver Connection Diagram for Multipl
PAGE 2
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the product. 5) Never connect any cables while power is on and always assure correct connections to avoid short circuits before switching on. 6) Please ensure that the cable is secured tightly in the connector 7) For update information please consult your supplier. Warranty Agreement 1) We provide lifelong technical assistance with this product: 5-year warranty.
PAGE 3
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.