Product Description

Shenzhen Sungi Technology Co., Ltd
4F,20th BLD,Xiaweiyuan,Gushu,Bao'an district,Shenzhen,China
Wireless bluetooth mouse
Model: M01
FCC ID: 2ABDB-M01
(i)Product Description
11.Bluetooth 4.0
2. Operating frequency: 2.400GHz - 2.480GHz
3. Effective range: up to 10 meters
4. Rated working voltage: 3.7V (Rechargeable lithium battery). Battery capacity: 800maH
5. Rated working current: 10mA (Sensor type: 3605). Charging current: 450MA, sleeping mode current:
50uA
6. Movement Detection: Optical
7. Transmission rate: 1Mbit/sec
8. Modulation mode: GFSK
9. Resolution: 800, 1200 (default), 1600 DPI
10. RF power frequency: 3dB
11. Working temperature: -40to +85
12. Operating systems: Windows98, Windows ME, Windows NT, Windows XP, VISTA, WIN7, WIN8,
Windows 10 and other systems.
13. Compatible devices: notebook, desktop computer, tablet, Android smart phone.
(ii) Operating Instructions:
1. Pairing: When the mouse is powered on for 3 seconds, press the SID (pairing button) or the left
button + middle button + right button to trigger the pairing mode. Once the blue light flashes,
device is able to search for the mouse (Bluetooth Mouse 4.0).
2. DPI mode: 800, 1200 (default), 1600. When press the DPI button, blue light flashes 1 time, 2 times,
and 3 times and that represents respective DPI mode.
3. When power voltage is lower than 3.3V, the blue light flashes slowly represent a low battery alarm.
When the voltage is lower than 3.0V, the mouse stops working.
4. USB mode is charging at 5V. Blue light is always on when charging, charging current: 450mA. The
blue light is off when fully charged.
5. 10 minutes of inactivity to enter deep sleep mode. During the sleeping mode, press a button to
wake up the mouse.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is

Summary of content (2 pages)