TD-LTE/LTE FDD/WLAN terminal User Manual SEL832/Mini11
◎ Appearance and function description ◎ Signal light status and Tag information
◎ SIM card install When the device is power off,please follow the picture below to insert the standard SIM card.
◎ Using instruction ① Plug and play The device is connected to PC through USB interface.After the driver is automatically and correctly installed,it will be identified as the network card. It can be used directly without through WiFi list. The automatic driver installation support OS windows 7/8/10. ② Connect through WiFi When both green and blue lights on,choose the SSID match this device from your WiFi list and enter the correct password to use.
◎ Cautions Please read the following precautions before using: 1. Input voltage requirements: DC +5V/≥1A . 2. Handle with care and keep the product in a clean and dust-free place. 3. Do not drop,throw,bend or disassemble the product. 4. Do not put it in the place with moisture,water or other liquids. 5. Please do not put it in the place with high temperature or flammable gas. 6. Do not use this product in the aircraft and places where WiFi is required to turned off. 7.
FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
