User's Manual

ST- RFM093 Simple Menu

This is 27MHz Radio Frequency Wireless Mouse.

You will find one mouse, one USB receiver and 2 pcs AAA battery.

Pls follow up below steps to connect this mouse to computer.

1) To push the top half of the button in the centre of the mouse( indicated below) to

release cover to pull back this cover, insert 2 pcs battery according to the

appropriate polarity marks( +, - ), close the battery cover;

2) Push the lower half of the button in centre of the mouse( indicated below) to release

USB receiver.

3) Plug USB receiver into computer USB port;

4) Press USB receiver Identification Code button, then turn over your mouse and

press mouse bottom Identification Code button; Your personal identification code

can be automatically completed. The interval between pressing two Identification

Codes cannot exceed 5 seconds.

Then you can use this mouse freely.

If the mouse is not active, Pls repeat steps 4.

System requirements:

Windows 98/2000/NT/ME/XP/Vista & MAC OS 8.6 above

PAGE 1
ST- RFM093 Simple Menu This is 27MHz Radio Frequency Wireless Mouse. You will find one mouse, one USB receiver and 2 pcs AAA battery. Pls follow up below steps to connect this mouse to computer.
PAGE 2
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.