User's Manual

USB port
Nano receiver
FN+ESC=Media Player
FN+F1=Play/Pause
FN+F2=Previous Track
FN+F4=
Volume Up
FN+F3=Next Track
FN+F6=Mute (Windows )
FN+F7=Web home
FN+F5=
Volume Down
FN+F8=Search
FN+F9=Favorite
FN+F10= Email
FN+F11=
FN+F12= My computer
Installing the Batteries
Multim edia hotkeys functions:
Volume Up
Lock Key
1.Connect the USB plug to USB port of your computer
Model:SK-055AG
USB port
Step 1: Remove the battery compartment
cover on the bottom of the keyboard
by squeezing the cover in from the
tab bo release it.
Step 2:Insert the batteries as shown inside
the battery compartment.
Step3:Replace the cover.
The receiver is insert to USB port immediate,
or by a extra USB cable
Instruction Manual
FR 2.4G Hz Auto-Link Keyboard
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
Warning:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment
NOTE:
This equipment has been tested and found to comply with the limits for a ClassB
digital device,pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Restoring factory default settings
when you find this wireless keyboard doesn't work,
you can make the keyboard in working condition by
restoring back to factory default settings.
1:check the battery volume is normal; if the battery is used out,please replace new
batteries.
2.insert the USB receiver onto the USB port the PC or notebook
3. At the same time the battery into the keyboard, the keyboard LED lights flash
quickly said, restore factory Settings successfully.