User's Manual

Model:SMK78507AG
RF2.4GHz Auto-Link
Keyboard & Optical Mouse
Wireless keyboard and mouse are use two AAA alkaline batteries.
The receiver is insert to USB port immediate,
or by a extra USB cable.
USB port
Nano receiver
The keyboard have 16 hotkeys located on the left and right side.
Internet hotkeys:
Web home Mail My favorite
Search Refresh Stop
PC hotkeys:
My computer Calculator
Media hotkeys:
Media Play/pause Pre-track
Next-track
Mute Stop
Volume up Volume down
Installing the Batteries
Installing Batteries in the Mouse
Step 1.Open the battery compartment
Step 2.Insert the batteries as shown inside the battery compartment.
Step 3.Replace the cover.
Step 1.Remove the battery compartment
cover on the bottom of the keyboard
by squeezing the cover in from the
tab to release it.
Step 2.Insert the batteries as shown inside
the battery compartment.
Step 3.Replace the cover.
Install the batteries in the keyboard
Connecting the Receiver
USB port
State of standby and wake up the mouse
Power-Save function:
* This mouse is equipped with Traveling-Power-Save function.
When you are traveling with this mouse, the LED of the mouse will be switched
off automatically for the purpose of power-save, but the pre-condition is that
the receiver is disconnected with your notebook or PC.
Restoring factory default settings:
When you find this set doesn't work, you can make the mouse and keyboard in
working condition by restoring the mouse back to factory default settings.
1: Check the battery volume is normal; if the battery is used out,
please replace new batteries.
2: Press the right and middle button of the mouse ; then...
3: Insert the USB receiver onto the USB port of PC or notebook. ( on 5 seconds )
4: Press the "ESC" and "K"of the keyboard.
Instruction Manual
CAUTION:To use this device properly,please reed
the user’s guide before installation
Hotkeys on the keyboard
*Your RF2.4GHz mouse have economize model,When your wireless mouse keeps
unused for continuous 8 minutes, the mouse will come to deep sleep mode, the
Optical LED will turn off, you should click any mouse button to wake up the mouse.