User's Guide

ManualsBrandsSHENZHEN SPRING TECHNOLOGY ManualsElectronicsBluetooth FM transmitter

Auto Scan Bluetooth Car FM Transmitter

USER GUIDE

Please read this manual carefully before use.

Product Description

This device, lets you stream music and calls directly from your

bluetooth device to your car FM stereo system. The built-in

microphone provides you with an amazing hands-free function, it

also features a USB and microSD card reader that let you steam your

favorite MP3 and WMA tunes to your car’s stereo system. Dual USB

port can quick charge your smart phone and other device at the same

time.

Specifications

FM frequency range: 88.1~107.9MHz

76.0~90.0MHZ(Japanese market)

Frequency stability:±10ppml

Product input: 12-24V

USB charge output: 5V/3A total (normal version)

USB(QC3.0) output: 5V/2.4A 9V/2A 12V/1.5A (QC3.0 version)

MicroSD slot and USB reader support music format: MP3,WMA

MicroSD and USB flash disk(Max capacity): 32GB

FM operating distance: about 5M

Summary of content (8 pages)

PAGE 1
Auto Scan Bluetooth Car FM Transmitter USER GUIDE Please read this manual carefully before use. Product Description This device, lets you stream music and calls directly from your bluetooth device to your car FM stereo system. The built-in microphone provides you with an amazing hands-free function, it also features a USB and microSD card reader that let you steam your favorite MP3 and WMA tunes to your car’s stereo system. Dual USB port can quick charge your smart phone and other device at the same time.
PAGE 2
Features Wirelessly transmit phone call from bluetooth mobile phone to the car FM stereo system; Switch to Hands-free mode automatically from music playing status when receiving calls; Supports music play back from USB and MicroSD card; Dual charge port, With voice prompts; 1.8’’ color monitor.
PAGE 3
① Screen display ② Microphone ③ Line in/out ④ Micro SD card slot ⑤ Previous song/Rewind /Frequency down ⑥ Auto scan ⑦ Quick select ⑧ Next song/ Fast-forward / Frequency up ⑨ Menu key ⑩ Channel(frequency) button
PAGE 4
⑪ Multi-function knob ⑫USB reader ⑬Charge USB 1 ⑭Charge USB 2 Operation Instruction FM Transmitter Set-up 1.Plug the FM transmitter into your vehicle’s cigarette lighter or power port, it will turn on automatically. 2.Tune your radio to an vacant FM frequency, then adjust this device to sync the same frequency（press channel button⑩ then rotate Multi-function knob）. Note: For the best audio quality, please find a least interfered vacant frequency.
PAGE 5
detect and pair with this unit (named as“FM38”). Bluetooth calling In the music playing mode, when there is an incoming call, this unit will automatically switch to telephone mode. 1.Please press the Multi-function knob⑪ to answer incoming call； press the Multi-function knob once again to hang up a call. 2.Please hold long press the Multi-function knob⑪ to reject an incoming call.
PAGE 6
charging cable are also needed, the 3rd part cables may charge at slow speed. Playing mode switch Long press Multi-function knob⑪ for 2 seconds to switch the playing mode from Bluetooth, Micro SD and USB flash drive. Quick Guide Operation Guide On FM transmitter 1.Set frequency Press “ CH ” button⑩ then rotate Multi-function knob⑪ or press Frequency down button ⑤ and Frequency up button⑧ 2.Quick select frequency 3.
PAGE 7
6.Play and Pause the music Press Multi-function knob⑪ 7.EQ mode switch ( in Press Menu key⑨,rotate Multi-function knob⑪ and Micro SD and USB mode) press this button make a choice.(NORMAL/CLASSICAL/POP/ROCK/JAZZ) 8.Play mode switch( in Press Menu key⑨,rotate Multi-function knob⑪ and Micro SD and USB mode) press this button make a choice.(REPEAT ALL/REPEAT ONE/RANDOM/REPEAT FOLDER) 9.Answer/hang up the call Press Multi-function button⑪ 10.Reject a call Hold long press Multi-function button⑪ 11.
PAGE 8
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.