DW2-RF User manual V1.
Shenzhen Sonoff Technologies Co.,Ltd. 中 文 本设备需要连接SONOFF 433MHz RF网关进行智能操作，可与 其他产品互联互通。 设备支持其他无线协议为433MHz的网关，具体以实际产品为准。 使用说明 1.
Shenzhen Sonoff Technologies Co.,Ltd. 2. 安装电池 2-1. 打开发射器后盖。 2-2. 根据正负极标识，装上电池。 > 2-3.
Shenzhen Sonoff Technologies Co.,Ltd. 中 文 3.
Shenzhen Sonoff Technologies Co.,Ltd. 安装设备 1. 撕下3M胶保护膜。 2. 安装时发射器和磁铁上的安装对位标识尽量对齐。 3.
Shenzhen Sonoff Technologies Co.,Ltd. 中 文 产品参数 产品型号 DW2-RF RF 433.92MHz 静态电流 ≤1.
Shenzhen Sonoff Technologies Co.,Ltd.
Shenzhen Sonoff Technologies Co.,Ltd.
Shenzhen Sonoff Technologies Co.,Ltd. English The device can be operated intelligently via working with the SONOFF 433MHz RF Bridge to communicate with other devices. The device can work with other gateways supporting 433MHz wireless protocol. Detailed information is in accordance with the final product. Operation instruction 1.
Shenzhen Sonoff Technologies Co.,Ltd. English 2.Install batteries 2-1. Remove the back cover of the transmitter. 2-2. Insert batteries into the battery compartment based on identifiers of positive and negative poles. > 2-3. Close the back cover. The battery is not included, please purchase it separately.
Shenzhen Sonoff Technologies Co.,Ltd. English 3. Add sub-devices Connect the Bridge before adding the sub-device. ZBBridge 已添加遥控器:0 暂无 遥控器，请添加 添加 > >20mm Access the eWeLink APP and select the Bridge, tap "Add" to select the alarm, and a "Beep" means the Bridge enters the pairing mode. Then seperate the magnet for more than 20 mm from the transmitter until the LED indicator stays on for 1 to 2s, and the pairing is complete when you hear "Beep Beep".
Shenzhen Sonoff Technologies Co.,Ltd. English 2. Try to align the mark line on the magnet with that on the transmitter during installation. 3. Install them in the opening and closing area separately. <5mm Make sure the installation gap is less than 5mm when the door or the window is closed. The device weight is less than 1 kg. The installation height of less than 2 m is recommended.
Shenzhen Sonoff Technologies Co.,Ltd. English Specifications Model DW2-RF RF 433.92MHz Quiescent current ≤1.
Shenzhen Sonoff Technologies Co.,Ltd. English Features DW2-RF is a ZigBee low-energy wireless door/window sensor that makes you know the opening/closing status of door and window by separating the magnet from the transmitter. Connect it with the Bridge and you can create a smart scene to trigger other devices. Low-energy Alarm recordings check Smart scene Application Door Window Note: ● Do not install outside the door/window.
Shenzhen Sonoff Technologies Co.,Ltd. English Replace batteries Remove the back cover Take the batteries out FCC Warning Changes or modifications not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide re a so n a b l e p ro te c ti o n a g a i n s t h a rmfu l interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
