Dear users, the configuration for this camera is professional, so please read the user manual carefully before using the camera. IP Camera (614W) User manual 2013-05 V1.
Statement If the user manual can not help you to solve the problem, please call our technology center for solutions. We will update the content for the new functions without notice. Notice 1、 Installation Environment , Keep away from the places for high-temperature, heat source and direct sunlight; , Keep away from water and when get wet, cut off the power immediately. , Avoid using at damp environment; the reference range for operation humidity is below 85%RH.
IP CAMERA USER MANUAL Index 1 2 3 PRODUCT INTRODUCTION ...................................................................................................... 3 1.1 PRODUCT SUMMARY ................................................................................................................. 3 1.2 PACKAGE FOR TYPICAL PRODUCTION ........................................................................................ 3 INSTALLATION GUIDE ...............................................................
IP CAMERA USER MANUAL 1 Product introduction 1.1 Product summary Thank you for choosing our company’s L series IP camera, the IP Camera combines a high quality digital video camera with network connectivity and a powerful web server to bring clear video to your desktop from anywhere on your local network or over the Internet. It is very suitable for family, shops, office building and so on. Main features for L series: ♦ The video is compressed by MJPEG.
IP CAMERA USER MANUAL 2 Installation guide 2.1 Wired connection to LAN Power on the IP camera, connect IP camera to router by network cable, meanwhile, connect computer to the same router, example of figure 1. Figure 1 Insert CD to computer driver, double click “LSearch_en.exe” in the CD, run the software, click “Search”, select the device searched, click “Browse” to open browser, it will pop up user login dialog, enter default user name(admin) and password(123456) to login the camera as figure 2.
IP CAMERA USER MANUAL power, otherwise the camera maybe damaged. 2.2 WIFI connecting to LAN You can connect the camera with router by wireless connection, as figure 3. Figure 3 Before connecting router by wifi, please connect them as chapter 2.1 to Login camera and enter wifi setting, and then operate as the following step, example of figure 4. Figure 4 Enter the Wireless LAN Setting, click the “Scan” button, it will show you all the wireless networks detected in the Wireless Network List column.
IP CAMERA USER MANUAL 2.3 Connecting to WAN You should connect the LAN network to WAN first and do the port forwarding, connect as figure 5. Figure 5 If visit IP Camera from WAN, you must do port forwarding on the router. Example of figure 6. Figure 6 Operation Steps: 1) After login the interface of the router, choose “Port Forwarding”; 2) Choose “Add custom Service”; 3) Input IP camera http port; 4) Input IP address of IP camera, click “Apply”.
IP CAMERA USER MANUAL After finishing the port forwarding, you can use WAN IP address of router and http port of camera to visit the camera by remote computer as figure 5. Notice: because the routers are different, so the interface and setting method of router are also different, how to do the port forwarding for various routers, please refer to the user manual of your router or consult with router manufacturer.
IP CAMERA USER MANUAL 8
IP CAMERA USER MANUAL 3 Operation of IE browser 3.1 View video After installing the plug-ins, click “Mode 1 to view” as Figure 2 to view the video (video as Figure 7). 3 2 1 4 Figure 7 1) Audio, Talk, Record, Snapshot You can click these buttons to perform audio, talk, record and snapshot functions. Note: about recording path, click button to enter setting interface, you can set it in “Local Recording Path”, as figure 8. Figure 8 2) Multipicture change button If you add multi-devices in chapter 3.
IP CAMERA USER MANUAL device to display pictures automatically when changing to 4, 9 split screen. In playing video area, you can select a picture to control audio, talk, record, snapshot and PTZ control etc. 3) Viewing control area You can control PTZ moving, picture reversal and mirror etc. when viewing video, and can adjust picture parameters, includes resolution, brightness etc.
IP CAMERA USER MANUAL Figure 10 3.3 Device web setting 3.3.1 Basic network settings The user can also enter the Basic Network Settings to set the IP address except using the search software “LSearch_en.exe”. See below Figure 11. Figure 11 Remark: The router connected to camera need to enable DHCP when the user uses “obtain IP from DHCP server”; the routers enable DHCP by default. 3.3.2 Wireless wifi settings Please refer to chapter 2.2. 3.3.
IP CAMERA USER MANUAL Figure 13 Notice:Using the third party domain name, if the http port is not 80, the port number should be adding to the domain name with colon. Example: http://btest.dyndns.biz:81. Don’t enter port number when you use manufacturer’s DDNS. 3.3.5 UPnP settings If you enable UPnP, once the IP camera is connected into the LAN, it will communicate with the router in the LAN and do the port-forwarding with open port of router automatically.
IP CAMERA USER MANUAL Figure 15 3.4.2 Mail Service Setting When it detects alarming, it can send email to your appointed email box, but you need to set email service parameters correctly. Example of figure 16, click “Submit” to save these parameters, and then you can click “Test” to check if the setting is successful. Figure 16 3.4.3 FTP Service Setting When alarming, the device will snap local picture and send them to FTP server, but need to set the FTP setting correctly.
IP CAMERA USER MANUAL Figure 17 Notice:For using the FTP function, you need to apply a user with authority that you can write and create submenu and some memory space. 3.4.4 Alarm log You can inquire when the device performs alarm in alarm log. Figure 18 3.5 User and device setting 3.5.1 Multi-device Setting As Figure 19, User can add maximum 9 devices to view video simultaneously. Click “refresh” button to check the device in the LAN.
IP CAMERA USER MANUAL Figure 19 3.5.2 User Settings Figure 20 3.5.3 PTZ settings Figure 21 Note: When you set cruise turns all the time, the camera will automatically stop after cruising one hour. 3.5.
IP CAMERA USER MANUAL Click “Restore factory settings”, it will pop up a dialog to ask you if restore factory settings, the camera will restore factory settings and reboot after you confirmed. There are two types software in the camera, one is device firmware, another is Web UI, and you can upgrade them respectively. 4 Visiting device by other software 4.1 Other web browser Except IE browser, you can visit the camera by Firefox, Safari, Chrome, Opera browser etc., please select “Mode 2 to view”. 4.
IP CAMERA USER MANUAL 5 Product family for L series 5.1 VGA Cube camera Figure 24 The camera adopts 300K pixels CMOS sensor, 3.6mm lens, built in MIC, 12 pieces IR LED, audio out socket. It uses 5V power adaptor. 5.2 VGA PTZ camera (Model A) Figure 25 The camera adopts 300K pixels CMOS sensor, 3.6mm lens, built in PTZ and MIC, 11 pieces IR LED, audio out socket. It uses 5V power adaptor. Statement: 1. If you have any questions of the manual, please contact our technical support. 2.