B Series——Goddess Model IP Camera 2010-12 V4.
IP CAMERA User Manual Index 1 INTRODUCTION ...........................................................................................................................4 2 FUNCTION AND FEATURES .....................................................................................................4 3 APPEARANCE AND INTERFACE.............................................................................................5 4 5 6 7 3.1 APPEARANCE .............................................................
IP CAMERA User Manual 7.4.4 Restore Factory Default.....................................................................................................22 7.4.5 User browsing Log.............................................................................................................22 8 CENTRALIZATION CONTROL ................................................................................................22 9 TECHNICAL PARAMETERS ...................................................................
IP CAMERA User Manual 1 Introduction The IP Camera combines a high quality digital video camera with network connectivity and a powerful web server to bring clear video to your desktop from anywhere on your local network or over the Internet. Your IP Camera package should contain the following items, If any of the listed items are missing, please contact your reseller from where you purchased the camera for assistance.
IP CAMERA User Manual is smart, easy and convenient to install in many sites. Infrared LED for night vision covers 5m area, to realize 24 hours monitoring. Support IR and color filter change automatically, no any color difference. It adopts the TCP/IP network protocols and has inner web server. Users can browse video through IE and other browsers. Data is transferred through one port; it is easy for user to do the network setting. Support 802.
IP CAMERA User Manual 3.2 Interface of Equipment Figure 2 1) Audio Output Socket: Audio output socket is for line-out audio player, such as headphone, speaker, etc. 2) RJ45 Ethernet Socket: RJ45 Ethernet socket is 10/100M self-adjust. The equipment can connect to all kinds of network equipments, such as hub, router, switch, etc. NOTE: Factory setting IP is 192.168.0.178, the http port is 80, the username is admin, the password is 123456. 3) WIFI Antenna Hole: Install the WIFI antenna.
IP CAMERA User Manual PIR Input pins Switch PIR Power Figure 4 6) Power Input Socket: Connect DC adaptor, its output should be 5V power specification. 7) RESET Button: reset button is on the bottom of the device, Press the RESET button and hold on more than 10 seconds, the equipment will restart and recover to the factory default settings. 4 Network Connecting Figure 5 4.
IP CAMERA User Manual connect to it by ADSL or optical fiber, etc. 3) PC-3 is connected to the Internet. 4.2 Visit Instruction To visit the IP Camera, you should do some settings of IP Camera and Internet besides getting the communication link fluency. 1) The PC and IP Camera are in the same LAN. If you want to use this PC to visit the IP Camera, you need to make sure their IP address is at the same segment. Otherwise you need to do the reset of the IP Camera’s IP address.
IP CAMERA User Manual automatically and pop up a window at the same time which requires to inputting the user name and password. Then you see the home page of the IP Camera-1, click “English” on the right-top corner, just as below Figure 7. On the right corner of the interface, user can choose the language. Figure 6 If you have the firewall software in your PC, when you run the HSearch_en.exe, it may pop up a window to say if you want to block this program or not, then you should choose not to block.
IP CAMERA User Manual Figure 7 5.2 Visit IP Camera We suggest using IE kernel browser to view the video (it can provide more functions), but user need to install Player before viewing the video. Click “download and install player (first use)” link, it will popup dialogue box as Figure 8, click Run, it will automatically download player and install. Figure 8 After install the plug-ins, click “Mode 1 to view” link in Figure 7 to view the video (video as Figure 9).
IP CAMERA User Manual Figure 9 1) Menu column There are 2 kinds of menu, one is main menu, and the other is submenu. The main menu lies at the top of the interface, including View, Network, Alarm, Maintain; Submenu lies on the left of the interface, and different main menu is in line with different submenu. 2) Video Displaying Area Video display area is according with resolution, the higher resolution, and the larger display.
IP CAMERA User Manual These buttons mean start video, stop, monitor, talk, record and snapshot. Click button to choose the functions. 5) PTZ and video control In Pan/Tilt control area, user can control the position according to the arrow sign: up, down, left, right, middle, horizontal cruise, vertical cruise, and stop etc. Means open IO output and Close IO output. User can also set the device resolution, brightness, contrast and other parameters. 6 Visit IP Camera from WAN 6.
IP CAMERA User Manual If user wants to put several IP Cameras into WAN, every device should set the port forwarding. In order to distinguish these devices, every device should set a different port. If the port of the device is not 80, should add the port to IP address with colon to visit the IP Camera. Example: http://202.96.82.177:81. 6.2 DDNS In Figure 5, Router-1 get WAN IP address via ADSL, these WAN IP address is always changing, so, the IP address can’t be confirmed when visit the device in WAN.
IP CAMERA User Manual The third party domain name is realized by analysis manner, the domain name will be displayed in the browser all the time when visit camera. If the port is not 80, the port number should be adding to the domain name with colon. Example: http://robbicam2.3322.org:81 7 Other Settings 7.1 Network Setting 7.1.1 Basic Network Setting The user can also enter the Basic Network Settings to set the IP address except using the search software. See below Figure 13. Figure 13 7.1.
IP CAMERA User Manual The IP address and port is the same, either wireless or wired network. 7.1.3 ADSL Setting User could enable the ADSL Dialup according to the below Figure 15 (The Telecom Operators will assign the user name and password to you when you apply for ADSL service.) Connect the device directly to the ADSL modem and it is connected to the Internet, but don’t need to do the port forwarding. Figure 15 7.1.
IP CAMERA User Manual alarm, please choose “close”. 2) Alarm Action After every trigger of alarm during the scheduled time, the device can trigger alarm in several ways. IO interface for alarm signal output: when relay was switched on (please refer to Picture 3), the external alarm will begin to alarm. Send alarm info by email. Send the site pictures to the FTP server, user can also set the break time between two pictures. Send alarm info to the alarm server.
IP CAMERA User Manual address. If this device has been port mapping to the Internet, then users can view the device’s video through the Internet IP address. Figure 18 Before setting these parameters, please refer the settings of Outlook Express. 7.2.3 FTP Service Setting Figure 19 When alarming, device will snap and send the image to FTP server, please make sure the FTP setting is correct.
IP CAMERA User Manual no alarm, device can also send the snap image to FTP periodically. In order to use FTP function, user should apply username and password on the FTP server first. And please apply some storage, and the authority to write and create sub-category into it. 7.2.4 Alarm Server Figure 20 Please confirm if you have connected to alarm server. The alarm message format as follow: GET /api/alarm.
IP CAMERA User Manual Figure 22 Figure 23 19
IP CAMERA User Manual 7.3.2 Multi Device Setting Figure 24 As Figure 24, User can maximum add 9 devices to view the device simultaneously. Click refresh button to check the device in the LAN. When click the device, will popup setting dialogue box and input the device info, as figure 25 and click save. After that, must click submit button to save. Figure 25 7.3.3 Other settings You can choose open or close indicator LED.
IP CAMERA User Manual Figure 26 7.4 Maintain 7.4.1 Device Information Figure 27 7.4.2 Time Setting If the device is connected to the Internet, you enable the NTP server to correct the time and select the right time zone. Or you should use the PC’s time to correct its time. Figure 28 7.4.3 Firmware upgrade The device runs 2 kinds of programmer, one is system firmware, the other is application firmware. They could be upgraded separately.
IP CAMERA User Manual Figure 29 7.4.4 Restore Factory Default Click “Restore Factory Default”, it will pop up a dialogue to confirm if you really want to restore the factory default. After confirmation, the system will restore the factory default and reboot. 7.4.5 User browsing Log After enter the log interface, you could view who and when the device is visited.
IP CAMERA User Manual be browsed at the same time. The software also supports snap, video record, alarm and so on. The below Figure 31 is the interface. For more information, pls. refer to the <> in CD. 9 Technical Parameters Item Image Capture Pan/Tilt Assistant Video and Audio Network Other Features Hardware Interface Sub Item Description Sensor CMOS sensor Total of pixel 300k Minimum illumination IR on,0 Lux Lens f=4.5mm, F=2.
IP CAMERA User Manual Physical Index Software(PC Side) Audio Out Audio Line-out interface x 1 Weight 298g Main body 108mm(L)*109mm(W)*131mm(H) Power DC 5V Power consumption <6W Operating temperature -20℃~ 45℃ Operating temperature 10% ~ 80% non-condensing OS Supported Microsoft Windows 98/2000/XP/Vista etc. Browser Internet Explorer6.0 and Above or Compatible Browser, Firefox, Safari etc. Application Software IPCMonitor.
IP CAMERA User Manual Chapter 5 to check if you can visit via LAN; Chapter 6 to check if the port forwarding is correct; and check the route setting if it forbid this equipment sending data to internet. 6) Can visit via public IP address, but can’t visit via manufacturer’s domain name Make sure the DNS setting is same as your PC , as below Figure 32 , in the search tool , the DNS 1 and DNS 2 on both side should be same.
IP CAMERA User Manual 11 FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.