Contents Contents GENERAL INFORMATION Main Features For your Safety Unpacking General Operation RCU Rear Panel P1 P1 P2 P3 P3 P4 P5 INSTALLATION P6 WELCOME PAGE P7 MAIN MENU P8 1. 2. 3. 4. 5.
GENERAL INFORMATION INFORMATION GENERAL For Your Safety Warning statement Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment . NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
GENERAL INFORMATION INFORMATION GENERAL This Digital Terrestrial Receiver (DTR) will take you to the new and exciting world of Digital Television. A world of crystal clear widescreen pictures, digital sound, more information and new services. All this and more on "Free to Air" Digital Television. To make full use of your new DTR please take the time to familiarize yourself with the extensive features of the unit detailed in this User's Guide.
GENERAL INFORMATION INFORMATION GENERAL For Your Safety To avoid electric-shock hazards, do not open the cabinet, refer servicing to qualified personnel only. Keep the receiver away from flower vases, tubs, sinks, etc., in order to avoid damaging the equipment. Do not expose the receiver un-der the sunlight. And keep it away from the heat source. Do not block ventilation holes of the Receiver so that air can circulate freely. When the abnormal phenomenon occur, you should cut off the power immediately.
GENERAL INFORMATION INFORMATION GENERAL Unpacking 3 2 1 6 5 9 4 ER 8 TIM 7 0 HE LP GU ID E E CC US PA EP FO IN + GE SLE PA L NA SIG V FA GE PA DIO AU CH TIO RA + VO L+ OK VO EX IT L CH ME NU RE CA LL Nu mb CH e rs .L IS LA T NG Da UA sh (- ) CH .
GENERAL INFORMATION INFORMATION GENERAL RCU Key Function Turns power ON/OFF When watching a program, mute the sound 1 2 3 4 5 6 AUDIO 7 8 9 RECALL HELP 0 TIMER INFO CC GUIDE SLEEP PAUSE SIGNAL AUDIO FAV 0~9 FAV PAGE+ CC Select caption mode if available PAGE+,PAGE- Moves up / down a page in the program list MENU MENU RECALL CH CH.
GENERAL INFORMATION INFORMATION GENERAL Front Panel Rear Panel VIDEO OUT Composite output ANT IN: CONNECT TO ANTENNA LOOP: CONNECT TO ANOTHER RECEIVER AUDIO OUT (Left/Right) To a TV, amplifier, receiver or stereo system 5 POWER CABLE
INSTALLATION INSTALLATION Connecting to TV using RCA connectors VIDEO AUDIO TV L R Antenna 6
WELCOME PAGE PAGE WELCOME When power on first time, it will show welcome page like below. Press CH+,CH- keys to move highlight to select RF Channel and Time Zone. Press VOL+,VOL- keys to move the cursor to choose your choice. Move highlight to [Auto Scan] option and press OK key to enter “ Auto Scan” menu . Press [EXIT] key to exit this menu.
MAIN MENU MENU MAIN When you press [MENU] key, you can enter Main Menu. This menu consists of 4 major sub-menus as below. -Channel -Installation -Setup -Tools 1. Channel Move highlight on Channel item and press [OK] key to enter Channel menu as desides. This menu has three sub-menus : TV Channel list, Delete All Favorites and Delete All. 1.1 TV Channel List When you enter “Channel List” menu, the screen will display as below.
MAIN MENU MENU MAIN Pressing number key 2 to pop up a dialogue: Switch lock channel, are you sure? Select YES and press OK key to assign the selected channel with lock mark, or press [EXIT] key to cancel the operation. Pressing number key 3 to pop up a dialogue: Switch skip channel, are you sure? Select YES and press OK key to assign the selected channel with skip mark, or press [EXIT] key to cancel the operation.
MAIN MENU MENU MAIN 1.1.3 Sort Pressing number key [3] will pop up the Sort drop-down list. Name(A-Z): The ascending order, omitting the $ character, the number is ahead, then the capital letter, at last the lowercase. Name (Z-A): The opposite order of the above Name (A-Z). Free/Scrabmle: All FTA programs are listed ahead, while all scrambled programs are listed last. Lock: All locked programs are listed at the last. 1.1.
MAIN MENU MENU MAIN 2. Installation When you enter the Installation menu, the screen will display as below. In this menu, you can press VOL+,VOL- keys to select sub-menus and press [OK] key to enter the menu which is chosen. 2.1 Auto Scan When you enter Auto Scan menu, the screen will display as below. Move the highlight on the search option, and press [OK] key to start scanning. Press [EXIT] key to exit this menu. 2.2 Manual Scan When you enter Manual Scan, the screen will display as beside.
MAIN MENU MENU MAIN 3.1 OSD Language When you enter OSD Language, the screen will display as beside. You can press VOL+,VOL- keys to choose OSD Language. 3.2 TV System When you enter TV System, you will see the screen as beside. 1) Aspect Ratio is used for switching the screen aspect ratio mode. Now we provide several options: 4:3LB/4:3PS/16:9. You can press [Left/Right] key to select each mode circularly.
MAIN MENU MENU MAIN 3.4 Timer Setting When you enter the Sleep Timer you will see the screen like besides Press CH+,CH- keys to select menu among all the items. Press [OK] key to enter the selected item. Program Timer contain Timer Number and Timer Mode. Timer Number: Press VOL+,VOL-keys ,you can select between 1-8 Timer Mode:Press VOL+,VOL- keys ,you can choose between On and Off. Sleep Timer can set the time when the system can enter standby mode automatically.
MAIN MENU MENU MAIN 3.5.1 U.S. TV Rating U.S. TV rating When you enter below: U.S. TV rating menu, you will see a screen like 1.Press CH+,CH-,VOL+,VOL- keys to move rating position and press [ok] to lock or unlock the rating setting. You can also press Allow All or Block All to switch all rating setting. 2.Each time you move rating position, the rating description will show what this position means under this rating table. 3 Press [Exit] can exit the current menu. 3.5.2 MPAA/C.E.L.R/C.F.L.
MAIN MENU MENU MAIN 4. Tools When you enter Tools menu, you will see the screen like below. It contains three sub-menus such as: Receiver Information, Load Factory Default, Software Upgrade. Press CH+,CH- key to select menu among all the items. Press [OK] key to enter the selected item. 4.1 Receiver Information When you enter Receiver Information menu, you should see the screen like it displays on the right. This screen displays receiver information. You should press [EXIT] key to cancel this menu. 4.
MAIN MENU MENU MAIN 5. Hot Key 5.1 Number Use the numeric keys (0-9) to input the number of the desired channel. If the inputted number is beyond the valid channel number, system will "Invalid number” and press OK key to close this message. 5.2 CH+/CH- (Channel Change) Press CH+, CH- keys to change the channel up or down. If in the all satellites group, you can select channel in all searched channels. If in the specific satellite, only can select channel in the satellite group. 5.
MAIN MENU MENU MAIN 5.9 Audio In full screen, press [Audio] key can switch available audio language. 5.10 Recall Press Recall key to switch the current channel to the previous channel. 5.11 Info Press INFO key to enter into the information Window. 5.12 FAV 1. Press FAV key to pop up the favourite group window. 2. Press VOL+,VOL- keys to select the favorite group. Press CH+,CH- keys to select the channel up or down. Press OK key at the selected channel to view it in full-screen.
MAIN MENU MENU MAIN 5.15 SLEEP 1 You can set sleep time by press [Sleep] key in full screen. 2 The sleep mode include: Off / 1hr/ 2hr/ 4hr / 8hr. 5.16 Ratio Press [RATIO] key to switch video aspect ratio. 5.17 Signal Press [SIGNAL] key will show the parameters of current channel as blow picture. 5.18 Easy Install Easy Install Press [CH.ADD] key to into easy install menu. 5.19 Language Press [LANGUAGE] key to switch OSD language. 5.20 Timer Press [TIMER] key to setup timer.
TROUBLE SHOOTING SHOOTING TROUBLE Problem Possible causes What to do The display on the front panel does not light up. Main cable is not connected. Check that the main cable is plugged into the power socket. No sound or picture, but the front panel shows red light. The receiver is in standby mode. Press the standby button. No sound or picture. No signal or weak signal. Check the cable connections, antenna and other equipment connected between the antenna and the receiver. Signal is too strong.