Portable Bluetooth Speaker Installation & Operating Instructions - Please keep for future reference BC-235D Real Life Technology Important - Please read these instructions fully before installing or operating These instructions contain important information which will help you get the best from your speaker and ensurer safe and correct installation and operation.
Safety Information Important – Please read these instructions fully before installation CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY COVER. NO USER-SERVICEABLE PARTS INSIDE, REFER ANY SERVICING TO QUALIFIED SERVICE PERSONNEL. • Please read this owner’s guide • • Please take the time to follow the instructions in this owner’s guide carefully. It will help you set up and operate your system properly and enjoy all of its advanced features.
Contents and Features Page Contents Box Contents ........................................................................................................................ 2 Features ................................................................................................................................. 2 Controls and Indicators .................................................................................................... 3 Charging your speaker ..................................................
Controls and Indicators Controls and Indicators 2. Volume 1. Microphone 4. Volume + 3. Play/Pause/Hands-free 1. Microphone position for hands-free calls 2. Press to reduce volume, hold down to reduce volume fast. 3. In Bluetooth search mode, hold down for 3 seconds to enter pairing mode; in Bluetooth play status, press to pause/play music; when a call comes, press key to answer, press again to hang up. 4. Press to increase volume, hold down to increase the volume fast. 1.
Charging and Pairing Charging your speaker (3.7V 800mAh rechargeable battery built-in) Connect the speaker to a computer or 5V USB mains adaptor (not included) with the USB cable supplied. Red LED turns ON during charging, turns OFF when fully charged. Unplug USB cable when fully charged. Pairing your speaker with Bluetooth enabled mobiles and tablets 1. Place the speaker and mobile/tablet within 3 metres of each other. Turn on the speaker using the power switch (5) on the back of the speaker, the LED 2.
Hands-Free / AUX IN / Line out Re-connecting to a paired device Each time the speaker is turned on, there are two possible outcomes. The speaker will connect automatically to the last connected device, just press play for playback. The speaker will be listed on your devices screen of as an available output channel, select the speaker as output channel and play your music. Hands-free Press “Hands-free” (yey 3) to answer a phone call. Press again to end a call.
Troubleshooting and Warnings Troubleshooting Q1 The sound is low or completely silent. A1 Make sure both your audio device and the speaker are charged. A2 Make sure the connection (either Bluetooth or AUX) is fully functioning and secure. If you are using the AUX port check the cable is connected properly. A3 Check the speaker and audio device volume and that an audible music track is playing.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
