Bluetooth Speaker User Manual Model: BC15 This picture is only provided for your reference and may be different with the actual product, so please refer to the actual product! Please keep this manual well for future use and this company will not notify you about any updated versions.
Table Of Contents Introduction ......................................................................................... 2 Precautions .......................................................................................... 2 Definitions of Keypads and Jacks ......................................................... 3 LED indicator lamp: .............................................................................. 4 Power on function ........................................................................
Introduction This product is a kind of Bluetooth sound system supporting stereo music, hands‐free for answering calls, equipped with digital signal processing technology, echo and noise removal feature. It is applied to the different circumstances like office and house, etc., and it may be connected to most other equipment and mobile phones supporting Bluetooth feature by means of wireless for hi‐quality hands‐free calls and play the stereo music from other equipment and mobile phones.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
1. : Press it shortly to power ON/ OFF. 2. : Play / Pause 3. : Press The key for more than 3 seconds in SEARCH mode for PAIR status; 4. : Press it shortly for Volume Up and press it for a longer time to tune up the volume rapidly; 5. : Press it shortly for Volume Down and press it for a longer time to tune down the volume rapidly; 1. AUX IN: 3. 5mm jack to connect the input jack of external sound source 2.
LED (Red): The Red LED indicator lamp in the back side of the unit will keep on when it is charginghe, after it is fully charged, the Red LED light will be off. Power on function (two ways are available) A. Switch the “BATT/DC” switch at the back cover of machine to “DC” and plug the DC 5V power to DC jack at the back, and then press “ ” key to power on the machine. Remarks: 1. Under any function stutus, connect the unit with DC 5V adaptor, 3.7V Nokia battery will be charged. 2.
1). Put the mobile phone within 3 meters; 2). Activate the Bluetooth functions of Bluetooth mobile phone so that the mobile phone starts to search for the Bluetooth device; please refer to the user’s manual of mobile phone; 3). Select “ Case Logic Spkr ” from the device having already been searched by the cell phone; 5).
Aux‐in Mode When AUX IN line is connected to AUX IN Jack, the system will automatically pause the Bluetooth, the blue LED turns off and Red LED light keep on lit, the unit enters into AUX ” key or “ ” key shortly or for a longer IN mode. Then users can press or press “ time to adjust the volume. When users disconnected AUX IN line completely out of AUX IN Jack, the system will re‐enter into the Bluetooth SEARCH mode and search for the equipment connected last time.
No Indicate light, The Bluetooth speaker do not work for long time, press the Bluetooth can not “ ” key more than 3 seconds to active the Bluetooth. be connected. The sound volumn is low 1.After the mobile equipment connected with the Bluetooth speaker, the Bluetooth speaker did not turn up in the default level output, increase the volumn of the mobile. 2. Bluetooth speker volumn is lower. Bluetooth There is obstacles between the mobile and Bluetooth connection speakers. Can remove the obstacles.
mobile phone and the Bluetooth speaker will enter to paring status. And users can searching the Bluetooth ID again and connect again. Note: If the unit still can not works well after tried the above solutions, please connect the local aftersale service to handle it. Product Specification 1. Battery Specification: Built‐in 3.7V 1000mAh lithium battery 2. Interface: 3.5mm stereo audio input, MINI USB DC charge 3. Charging voltage: DC 5V 4. Charging current: 500mA MAX 5. Charging time: more than 3 hours 6.
Accessories: 1. User Manual: 1pc 2.