Product Manual

Thanks for choosing us! This is a magnetic suction wireless power
bank with 10000mAh capacity,When you use the magnetic series
mobile phone, it can be attached to the back of the mobile phone
and easily taken away;It can charge tablets, mobile phones, game
consoles, e-books, digital cameras, Airpods and other devices.
Please read the manual carefully before using the product, and keep
properly for checking.
Product Introduction
1
Product Manual
Power Bank Charging Instructions
Operation Steps
After the one end of usb cable is connected to the mobile power supply, and
other is connected to the adapter(Not Include Adapter,and need to support
PD QC AFC protocol),When digital display is bright, it indicate the power
bank enters into charging state , and the digital display starts to flicker at the
same time..
MADE IN CHINA
Magnetic
Wireless Power Bank
风琴折 65x90mm
1
OFF/ON Function Button
Digital Display Screen
ON/OFF Function Button
Digital Display Description : The screen flashes when the electric quantity is 0-99
during charging; When the battery is full, it will display 100 and stop flashing.
Note
KY300
9.0V 2.0A
5.0V 2.0A
9.0V 2.0A
5.0V 2.4A
98.5mm*69.5mm*17.1mm
10000mAh/38.5Wh
Wireless Charging Operating Instructions
Using Instructions
2.The magnetic suction function is only applicable to magnetic phone series,
and the non-magnetic suction function devices are only used or charging.
8.If you find that it cannot be charged, please check whether the wiring is
normal and firm; or whether the power adapter is suitable,it is
recommended to use a regular brand power adapter for charging.
3.When you use the magnetic function, it is recommended to use it in a bare
phone or with a magnetic phone case. Keep away from metal foreign
objects to avoid affecting charging.
4.Short press the switch function button can turn on the wireless charging
function, and detect electric quantity of the power bank at the same time,
the number displayed on the screen is the power level of the product.
6.The digital display flashes when the electric quantity is 0-99 during charging;
When the battery is full, it will display 100 and stop flashing.
7.Open wireless mobile power switch,it will automatically read if thereis
device on the power bank that need wireless charging when 30 seconds
didn't read need charging equipment, or separated the devicefrom mobile
power more than 30 seconds, mobile power supply will default no
equipment to charge, and will automatically shut down.Use again please
restart the switch,that can avoid wasting power.
5.Turn on the power bank(short press the OFF/ON function button),if the
electric quantity number of the screen is no more than 5,the digital display
will flashes,it means that the host has insufficient power,it need to charge.
1.This product has three charging modes: wireless, USB-A, USB-C. The
maximum power of wireless charging is 15W; The maximum power of wired
charging is 18W,and the USB-A interface can output charging, the USB-C
interface provides both input and output charging.
Warnning
1 . The battery power of this product is low when leave factory,
please c
harge it fully before use;
2
. Please do not fully discharge the power in the power supply
before rechargi
ng,to keep product lifetime.
3
. If you do not use the product for a long time, please fully charge
t
he product at least once every 1 month;
4
. Please use the standard accessories of the product. If the product
is dam
aged due to the use of non-standard accessories, it will not
be covered by the warrant
y;
5
. Dismantling the product privately, if the product is damaged, it
is not
covered by the warranty;
6
. It is forbidden to disassemble, hit or throw this product into fire
w
ater;
7
. Do not store this product in dusty, high or low temperature places
(Temperat
ure range -10℃—+40℃);
8
. Do not place this product in a humid environment, pay attention
t
o waterproof and moisture-proof;If you need to clean it, please
use a soft
cloth to clean the product;
9
. To avoid accidents, please keep product away from children.
Product Specification
Input
Output1/Output2
Wireless Output
15W/10W/7.5W/5W
Efficiency
Product Size
Capacity
7500mAh（5V-3A）
Rated Capacity
75%
If the device need wireless charging when the mobile supply in standby state,
please press the off/on function button to wake up the wireless mobile power
bank at first.
Both USB-A and USB-C port can charging devices,Use one end of USB cable t
o connect the mobile power supply,other end is connected to the devices, the
devices enters the charge power status.(It support tablet computer , mobile
phones, game consoles, e-books, digital cameras, etc. with wired charging).
2
Simultaneous Wireless and Wired Charging Instructions
This power bank can charging devices via wired and wirelessly way at the same
time.When one way is fast charging mode,the other will automatically converted
to 5V charging mode.
4
Wired Charging Operating Instructions
3
USB-A
USB-C
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:(1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment. This equipment has been tested and found
to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more
of the following measures:
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.