Product Manual

ManualsBrandsShenzhen Shi Aiker Electronic Technology ManualsElectronicsMagnetic Wireless Power Bank

Warnning

The battery power of this product is low when leave factory,

please charge it fully before use;

Please do not fully discharge the power in the power supply

before recharging,t

o keep product lifetime.

If you do not use the product for a long time, please fully charge

he product at least once every 1 month;

Please use the standard accessories of the product. If the product

is damaged due to the use of non-standard accessories, it will not

be covered by the warranty;

Dismantling the product privately, if the product is damaged, it

is not

covered by the warranty;

It is forbidden to disassemble, hit or throw this product into fire

water;

Do not store this product in dusty, high or low temperature places

(Temperature range -10℃—+40℃);

Do not place this product in a humid environment, pay attention

o waterproof and moisture-proof;If you need to clean it, please

use a soft

cloth to clean the product;

To avoid accidents, please keep product away from children.

Using Instructions

Product Specification

2.It is recommended to use a magnetic phone case or use it in

bare phone,and must keep aw

ay from metal foreign objects

hen using, so as not to affect charging.

3.Take out the wireless mobile power, press the switch once can

detect the power,and at the same time turn on the wireless

charging function, then green power light on the power bank

ill be on. After fully charged, the product will automatically

ent

er the standbystate.

4.When only one indicator light of the pow

er bank is on and

flashes, the host bat

tery is insufficient, please charge the product.

6.If you find that it cannot be charged, please check whether the

wiring is normal and firm; or whether the power adapter is suitable,

it is recommended to use a regular brand power adapter for

charging.

5.Open wireless mobile power switch,it will automatically read if

hereis device on the power bank that need wireless charging

when 30 seconds didn't read need charging equipment, or

separated the devicefrom mobile power more than 30 seconds,

mobile power supply will default

no equipment to charge, and will

automat

ically shut down.Use again please restart the switch,that

can avoid w

asting power. (Forexample: when you answer the call

for more than 50 seconds, please press the start

switch again)

1.The magnet

ic suction function is only applicable to magnetic

phone series, and the non-magnetic suction function devices

are only used or charging.

Input

Frequency

Output

15W (wireless); 18W(USB)

Efficiency

Product Size

Power bank

capacity

4000 mAh

98mm*64mm*10mm

110-205KHz

9.0V 2.0A

5.0V 2.0A

75%

Thanks for choosing us! This is a magnetic suction

wireless power bank,When you use the magnetic series

mobile phone, it can be attached to the back of the

mobile phone and easily taken away;It can charge

tablets, mobile phones, game consoles, e-books, digital

cameras, Airpods and other devices. Please read the

manual carefully before using the product, and keep

properly for checking.

Product Introduction

Product Manual

Charge the wireless power bank

Use magnetic wireless power bank to charge phone

wirelessly

Operation Steps

The one endof usb cable is connected to the mobile power supply, and other is connected to the

adapter (not include and need support the PD QC AFC protocol) ,then plug the adapter into the

mains,the power bank's green light flashes,that indicate enter to charging state (4 green lights

each represents 25% power, 1-25%,2-50%, 3-75%, 4-100%) When all 4 green lights are on and

not flashing,the charging is complete.

Use mobile power to charge the mobile phone wired

Use one end of the standard usb cable to connect he the mobile power supply,other end is

connected to the phone, the phone enters the charge power status (power supply is PD protocol,

mobile phones that support PD fast charge protocol can charge quickly . Mobile phones that

do not support PD protocol can also be charged, but they must use a standard Type-C cable)

Note: This package does not contain USB C-Lighting data cable, please purchase separately.

Take out the wireless power bank, short press the power bank’s button once, after the green

light turns on,put the magnetic function phone on the wireless power bank,the built-in magnet

of the wireless charger will automatically align and accurately adsorb to the mobile phone ,and

then start to wireless charging.

MADE IN CHINA

Magnetic

Wireless Power Bank

Notes: The standard usb cable need to

be used with PD charging adapter

25%

50%

75%

100%

FCC Warning

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.Any Changes or modifications not

expressly approved by the party responsible for

compliance could void the user's authority to operate

the equipment. This equipment has been tested and

found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates uses and can

radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation. If this

equipment does cause harmful interference to radio or

television reception, which can be determined by

turning the equipment off and on, the user is

encouraged to try to correct the interference by one

or more of the following measures:Reorient or relocate

the receiving antenna. Increase the separation

between

the equipment andreceiver.- Connect the equipment into

an outlet on a circuit different from that to which the

receiver is connected.Consult the dealer or an

experienced radioTVtechnicianf or help.Th e device has

been evaluated to meet general RF exposur e

requirement. The device can beused in portable expos

ure condition without restriction.FCC RF exposure stat

ement:The equipment complies with FCC radiation exposu

re limits set forth for an uncontrolled environment.