Installation Instructions

FAST WIRELESS CHARGER

---------------------

----------

---

---------------------

----------

1. Plug the power adapter (qc2.0/3.0 quick charge

adapter) into the socket.

2.One end of the USB power cord is connected to

the adapter and the other end to the charging board.

Put wireless charging mobile phone on the left of

the charger,the left green light will light up individually

vice versa.All of the above are normal charging. When

the indicator is oﬀ, the charging is abnormal. Please

adjust the position of the phone again untill the indicator

light only displays green.

The charger indicator turn to green when the charge

is powered.

After full charge, the green light will turn oﬀ after 5

seconds.

Charging place of

phone and airpods

Intelligent control

chip

USB power

interface

LED charging

indicator

---

成品尺寸:65mmx115mm

材质及工艺：120g铜版纸双面印刷风琴折

PAGE 1
--- FAST WIRELESS CHARGER ---------- --------------------- 3 5 --- C 1 Charging place of phone and airpods 3 USB power interface --------------------- ---------- 2 Intelligent control chip 3 5 LED charging indicator 成品尺寸:65mmx115mm 1. Plug the power adapter (qc2.0/3.0 quick charge adapter) into the socket. 2.One end of the USB power cord is connected to the adapter and the other end to the charging board. The charger indicator turn to green when the charge is powered.
PAGE 2
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two cond itions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.