User Instructions

ManualsBrandsShenzhen Shengtong New Energy Technology ManualsElectronicsThermoprobe

Instructions

ST_PROBE product performance parameters:

1. Scope of application of temperature

1. External temperature range 50-300 degrees Celsius

2. Internal temperature range -10-100 degrees Celsius

2. Product power consumption <40mA and standby <10uA.

3. Temperature measurement accuracy+-1 degrees Celsius.

4. Product battery capacity performance parameters: standard AAA7 battery 2pcs

5. The charging time is < 15 minutes, and it will automatically shut down when it is fully charged.

6. APP connection distance >50 meters

7. The battery can be used once a day for more than 60 days (default factory setting). Standby >18 months.

8. Net weight (excluding battery) 68g Size: 35*142*17 mm.

Function keys:

Long press function key 3S to turn on, long press function key 3S to turn off. Short press function

key twice the unit can switch. Short press function key, the internal and external temperature

switch. ( Internal and external temperatures can only be switched when cooking).

Display area:

Summary of content (4 pages)

PAGE 1
Instructions ST_PROBE product performance parameters: 1. Scope of application of temperature 1. External temperature range 50-300 degrees Celsius 2. Internal temperature range -10-100 degrees Celsius 2. Product power consumption <40mA and standby <10uA. 3. Temperature measurement accuracy+-1 degrees Celsius. 4. Product battery capacity performance parameters: standard AAA7 battery 5. The charging time is < 15 minutes, and it will automatically shut down when it is fully charged. 6.
PAGE 2
1. APP connection identity: The icon always lights up when the APP is connected. 2. External temperature indicator: The icon is displayed when the external temperature is displayed on the screen. ( The internal and external temperatures can only be changed while cooking). 3. Probe Low Charge: The icon flashes when the probe charge is less than 15%. (Only if the probe is connected) 4. Internal temperature indicator: The icon is displayed when the internal temperature is displayed on the screen. 5.
PAGE 3
display temperature. ( If the device does not response, please put the prob back case and perform this step again). 4. to the charging After connecting to the APP and selecting the cooking ingredients, temperature mode and time mode, start running. 5. Insert the probe into the foodPlease make sure that the section of below safety line is wrapped of food when bake the food at high temperature. 6. Put it in the oven to bake. 7.
PAGE 4
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.